7 Best GT2 Timing Belts (2mm Pitch) for 3D Printers, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Almost every hobby printer moves its X and Y axes on GT2 belts: rubber belts with teeth every 2mm, usually 6mm wide. Our top pick is Zeelo's 10-meter GT2 roll, fiberglass reinforced and long enough for several repairs on Enders, CR-10s and RepRap builds. TIEXYE's 2-meter belt with copper sleeves is the cheapest pick. FYSETC sells a 5m roll with an anti-slip tooth face, HANGLIFE adds pre-pressed buckles in 6mm and 9mm widths, XIKE sells 200mm closed loops for Voron Z drives, and KALIONE packs eight short lengths. We checked the published pitch, width and length for all 7.
Our top pick: Zeelo 10m GT2 Timing Belt.
Quick picks
The best fit for you
- You maintain several Ender 3 printers Zeelo 10m GT2 Timing Belt 10m of 6mm GT2.
- You want a tougher tooth face FYSETC 5M 2mm Pitch 6mm Wide Belt FYSETC anti-slip 5m.
- You want a quick one-axis fix Hanglife GT2 Belt 6mm x 2m with Buckles 2m with buckles.
- Your printer uses 9mm belts Hanglife GT2 9mm Open Timing Belt (10m) 10m of 9mm GT2.
- You build a Voron Z drive XIKE GT2 Timing Belt 200mm, 6mm Wide, 2mm Pitch, Closed Loop, 10-Pack | Low-dust rubber with tensile fiberglass core; anti-stretch & anti-slip; 100-tooth precision fit for Voron, 3D printers & CNC 200mm closed loops.
- You need the lowest price TIEXYE GT2 2m 6mm Belt 2m with copper sleeves.
Our 7 picks
Zeelo 10m GT2 Timing Belt
Best for: Best overall
- Belt Pitch
- ✓ 2mm Pitch
- Primary Material
- Rubber, fiberglass reinforced
- Length
- 394 inches
- Width
- 0.24 inches
View on Amazon: Zeelo 10m GT2 Timing Belt Affiliate link
Zeelo GT2 open timing belt, 10 meters of 6mm wide, 2mm pitch rubber with fiberglass reinforcement, listed for RepRap, Prusa Mendel, Rostock, CR-10 and Ender printers.
Pros
- 10m covers many repairs
- Fiberglass reinforced
- Standard 6mm width
Cons
- No buckles or clamps included
Good fit if
- You maintain several Enders or a CR-10
- You build a RepRap-style printer
Skip if
- You need a closed loop belt
Verdict: A long roll of standard GT2 belt.
FYSETC 5M 2mm Pitch 6mm Wide Belt
Best for: Best 5m roll
- Belt Pitch
- ✓ 2mm Pitch
- Primary Material
- Rubber, fiberglass reinforced
- Dimensions
- 1.97 × 0.24 × 0.08 inches
- Weight
- 1.59 ounces
View on Amazon: FYSETC 5M 2mm Pitch 6mm Wide Belt Affiliate link
FYSETC 2GT belt, 5 meters, 6mm wide with 2mm pitch: rubber with fiberglass reinforcement, anti-slip tooth cloth and an arc tooth profile, cut to length for Ender 3, Ender 5, CR-10 and Anet A8.
Pros
- Anti-slip tooth cloth
- Wear-resistant nylon tooth face
Cons
- No buckles included
Good fit if
- You replace both axes on an Ender 3 Pro
- You want a tougher tooth surface
Skip if
- You need 9mm or wider belt
Verdict: A 5m GT2 roll with an anti-slip face.
Hanglife GT2 Belt 6mm x 2m with Buckles
Best for: Best with buckles
- Belt Pitch
- ✓ 2mm Pitch
- Primary Material
- Nylon, neoprene rubber, fiberglass
- Dimensions
- 78.7 × 0.24 × 0.06 inches
View on Amazon: Hanglife GT2 Belt 6mm x 2m with Buckles Affiliate link
HANGLIFE GT2 belt, 6mm x 2m, 2mm pitch: nylon jacket over neoprene with fiberglass, plus 2 pre-pressed copper buckles for fast fitting.
Pros
- Copper buckles pre-pressed
- Nylon-jacketed rubber
Cons
- Only 2m
Good fit if
- You fix one Ender axis today
- You hate crimping belt ends
Skip if
- You maintain a print farm
Verdict: A 2m GT2 repair kit.
Hanglife GT2 9mm Open Timing Belt (10m)
Best for: Best wide belt
- Belt Pitch
- ✓ 2mm Pitch
- Primary Material
- Nylon, neoprene rubber, fiberglass
- Dimensions
- 394 × 0.35 × 0.06 inches
View on Amazon: Hanglife GT2 9mm Open Timing Belt (10m) Affiliate link
HANGLIFE GT2 belt, 9mm x 10m, 2mm pitch, nylon jacket over neoprene and fiberglass, with 8 pre-pressed copper buckles.
Pros
- 9mm width for stiffer motion
- 10m with 8 buckles
Cons
- Only fits printers built for 9mm belts
- Highest price here
Good fit if
- Your CoreXY or Voron uses 9mm belts
- You want enough for several rebuilds
Skip if
- Your printer uses 6mm pulleys
Verdict: Wide GT2 belt for bigger machines.
TIEXYE GT2 2m 6mm Belt
Best for: Best budget
- Belt Pitch
- ✓ 2mm Pitch
View on Amazon: TIEXYE GT2 2m 6mm Belt Affiliate link
TIEXYE 2-meter open GT2 belt, 2mm pitch and 6mm wide, with 4 copper sleeves; listed for Ender 3, Ender 3 V2, S1, S1 Pro, V3 SE, V3 KE and Ender-5 printers.
Pros
- Cheapest pick here
- 4 copper sleeves
- Long Ender fit list
Cons
- Low stock
- Only 2m
Good fit if
- Your Ender 3 V3 SE Y belt is frayed
- You want spares for very little
Skip if
- You need more than one axis of belt
Verdict: Cheap GT2 belt with sleeves for Enders.
XIKE GT2 Timing Belt 200mm, 6mm Wide, 2mm Pitch, Closed Loop, 10-Pack | Low-dust rubber with tensile fiberglass core; anti-stretch & anti-slip; 100-tooth precision fit for Voron, 3D printers & CNC
Best for: Best closed loop
- Belt Pitch
- ✓ 2mm Pitch
- Color
- Black
- Dimensions
- 7.87 × 0.24 × 0.05 inches
- Weight
- 1.02 ounces
XIKE 10-pack of closed-loop GT2 belts: 200mm pitch length, 6mm wide, 2mm pitch, 100 teeth, neoprene with fiberglass cords and a low-dust tooth fabric, for Voron 2.4 and Trident Z drives, Enders and CNC parts.
Pros
- Ten endless belts
- 100-tooth spec given
- Low-dust tooth face
Cons
- Only the 200mm loop size
- Low stock
Good fit if
- You build a Voron 2.4 or Trident Z drive
- You need 200mm loops
Skip if
- You need an open belt
Verdict: Spare 200mm GT2 loops for Voron builds.
KALIONE 8-Piece GT2 Belt Set
Best for: Best length assortment
- Primary Material
- fiber-reinforced rubber
- Color
- Black
- Dimensions
- 5.12 × 3.54 × 0.71 inches
View on Amazon: KALIONE 8-Piece GT2 Belt Set Affiliate link
KALIONE set of 8 GT2 belts, 6mm wide, in 110, 112, 122, 158, 200, 280, 300 and 400mm lengths, fiber-reinforced rubber for low noise and no slip.
Pros
- Eight lengths in one pack
- Low price
Cons
- One belt per length
- Listing does not say open or closed per size
Good fit if
- You repair DIY printers and need odd lengths
- You stock a maker space
Skip if
- You need several of one length
Verdict: A mixed bag of short GT2 belts.
Specifications side by side
| Spec | Zeelo 10m GT2 Timing Belt | FYSETC 5M 2mm Pitch 6mm Wide Belt | Hanglife GT2 Belt 6mm x 2m with Buckles | Hanglife GT2 9mm Open Timing Belt (10m) | TIEXYE GT2 2m 6mm Belt | XIKE GT2 Timing Belt 200mm, 6mm Wide, 2mm Pitch, Closed Loop, 10-Pack | Low-dust rubber with tensile fiberglass core; anti-stretch & anti-slip; 100-tooth precision fit for Voron, 3D printers & CNC | KALIONE 8-Piece GT2 Belt Set |
|---|---|---|---|---|---|---|---|
| Primary Material | Rubber, fiberglass reinforced | Rubber, fiberglass reinforced | Nylon, neoprene rubber, fiberglass | Nylon, neoprene rubber, fiberglass | not stated | not stated | fiber-reinforced rubber |
| Color | 10M | 5M | 6mm x 2M | 9mm x 10M | not stated | Black | Black |
| Belt Pitch | 2mm Pitch | 2mm Pitch | 2mm Pitch | 2mm Pitch | 2mm Pitch | 2mm Pitch | not stated |
| Length | 394 inches | not stated | not stated | not stated | not stated | not stated | not stated |
| Width | 0.24 inches | not stated | not stated | not stated | not stated | not stated | not stated |
| Dimensions | not stated | 1.97 × 0.24 × 0.08 inches | 78.7 × 0.24 × 0.06 inches | 394 × 0.35 × 0.06 inches | not stated | 7.87 × 0.24 × 0.05 inches | 5.12 × 3.54 × 0.71 inches |
| Weight | not stated | 1.59 ounces | not stated | not stated | not stated | 1.02 ounces | not stated |
| Model | ZR-200527002 | US-5M Open Belt | not stated | HLBT | not stated | 200-2GT-6 | zahnriemen |
| Size | not stated | 196.8 inches | not stated | not stated | not stated | 200x6mm | not stated |
How to choose a GT2 belt
-
Measure width before ordering
Six of these are 6mm wide; the HANGLIFE 10m roll is 9mm.
-
Open or closed
Open belts (Zeelo, FYSETC, HANGLIFE, TIEXYE) are cut and clamped; XIKE's are endless 200mm loops.
-
Use buckles or clamps
HANGLIFE includes pre-pressed copper buckles and TIEXYE includes 4 copper sleeves; Zeelo and FYSETC include none.
-
Look for fiberglass reinforcement
Zeelo, FYSETC, HANGLIFE and XIKE list fiberglass in the rubber to resist stretching.
Frequently asked questions
What does 2mm pitch mean on a GT2 belt?
The teeth are 2mm apart, matching GT2 pulleys.
How long is the Zeelo GT2 belt?
10 meters, 6mm wide.
Does the HANGLIFE 9mm belt include buckles?
Yes, 8 pre-pressed copper buckles with the 10m roll.
How many teeth does the XIKE 200mm loop have?
100 teeth at 2mm pitch.
Which lengths are in the KALIONE belt set?
110, 112, 122, 158, 200, 280, 300 and 400mm.
See also
- best PFA release films for resin 3d printers
- best carbon fiber pet build plates
- best 3d printer cameras for remote monitoring
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best SPARKX 3d printers
- best heatsinks for 3D Printer






