As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Zeelo 10m GT2 6mm Timing Belt Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Zeelo sells this black GT2 belt as a 10 meter (32.8ft) open roll, 6mm wide with 2mm pitch, and that length is the reason to buy it: enough for several printers, a full CoreXY or delta build, or years of spares. The belt is rubber with fiberglass reinforcement, per the bullets, and fits standard GT2 pulleys on RepRap, Prusa Mendel, Rostock, CR-10 and Ender 3 machines. The listing is brief: it gives no tooth-face material or tensile figure, and one bullet praises an aluminum pulley that is not listed as included, so plan on belt only. Our notes come from the listing and its published specs.

What stands out

  • 10m (32.8ft) open roll
  • GT2, 2mm pitch, 6mm wide
  • Fiberglass-reinforced rubber

Who it fits

Good fit for

Builders of CoreXY or delta printers, print farms, and anyone keeping belt for several Ender, CR-10 or Prusa-style machines.

Who should skip it

Owners re-belting one printer once, or printers on 9mm/10mm belts.

Verdict: Good value per meter if you will use the length; more than one hobby printer needs.

Zeelo GT2 belt at a glance

10 meters / 394 in

Bulk length.

GT2, 2mm pitch

Standard printer pulleys.

6mm width

Ender, CR-10, Prusa size.

Rubber + fiberglass

Listed reinforcement.

Open, black

Cut and clamp.

Pulley not listed as included

Belt only.

What the Zeelo listing covers

A fiberglass cord inside the rubber limits stretch, which keeps steps-per-mm accurate over time. Beyond that the listing is generic, even naming dishwashers and conveyors as uses, so judge it as a standard GT2 6mm belt. It ships under model ZR-200527002.

Using a 10m roll

Cut each axis to length with a little extra for the clamp, and store the rest coiled loosely away from heat and sunlight so the rubber does not harden. CoreXY printers use two long belts, so a long roll helps there. Pick this 10m Zeelo roll for builds and multi-printer upkeep; a 5m roll is the easier buy for re-belting one bed slinger.

Before you order

Checks for the Zeelo 10m GT2 belt.

Check before you buy

  • Your printer runs 6mm GT2 belts
  • You will use most of 10 meters
  • You have clamps or crimps for the ends
  • You do not expect pulleys in the box

The product at a glance

Zeelo 10m GT2 Timing Belt

Best for: Builds and print farms

Primary Material
Rubber, fiberglass reinforced
Belt Pitch
2mm Pitch
Length
394 inches
Width
0.24 inches

View on Amazon: Zeelo 10m GT2 Timing Belt Affiliate link

Zeelo GT2 open timing belt, 10m roll, 2mm pitch, 6mm, fiberglass-reinforced rubber, black.

Pros

  • Long 10m roll
  • Fiberglass reinforcement
  • Fits common GT2 pulleys

Cons

  • Generic listing text
  • No pulleys or clamps listed

Good fit if

  • You build or maintain several printers
  • You run a CoreXY or delta

Skip if

  • You need belt for one axis

Verdict: Bulk GT2 belt for builders.

Specifications side by side

Spec Zeelo 10m GT2 Timing Belt
Primary Material Rubber, fiberglass reinforced
Belt Pitch 2mm Pitch
Length 394 inches
Width 0.24 inches
Color 10M
Model ZR-200527002

Frequently asked questions

What length of belt is on the Zeelo roll?

10 meters, or 32.8 feet.

What is the Zeelo belt made of?

Rubber with fiberglass reinforcement.

Does the Zeelo belt include pulleys?

The listing mentions an aluminum pulley but lists only the belt; plan on belt only.

Which printers use this belt size?

RepRap, Prusa Mendel, Rostock, CR-10 and Ender 3, per the listing.

Is the Zeelo belt closed loop?

No, it is an open belt cut to length.

See also