KALIONE GT2 6mm Timing Belt 8-Length Set Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Most GT2 belt listings sell one long roll; KALIONE sells eight short belts in fixed lengths: 110, 112, 122, 158, 200, 280, 300 and 400mm, all 6mm wide. They are fiber-reinforced rubber. The listing has a conflict to settle before you buy. It calls them open synchronous belts, but fixed lengths in this range are usually closed loops, used for motor reductions, Z-axis sync drives and dual-gear extruders. An open 110mm belt would be too short for most printer axes. Look at the photos or ask the seller which type arrives. If they are loops, the set is handy for a printer upgrade that needs one specific short belt. The listing also mentions 'belt 3D printers' without naming any model. Details are KALIONE's.
What stands out
- 8 belts, 110mm to 400mm
- 6mm wide
- Fiber-reinforced rubber
Who it fits
Good fit for
Makers who need short 6mm GT2 belts for reductions, Z sync or other small drives.
Who should skip it
Anyone replacing a long X or Y belt, which needs a 2m roll.
Verdict: A useful assortment if the belts are loops; confirm the type first.
KALIONE belt set specs
110-400mm
Eight fixed lengths.
6mm wide
GT2 profile.
Fiber-reinforced rubber
Belt material.
8 pieces
One of each length.
Open or closed
Listing says open; lengths suggest loops.
Printers
None named.
Where short belts are used
Short GT2 loops connect a motor to a second pulley: in Z-axis sync kits that link two lead screws, geared extruders and some printer mods. With eight lengths you can try fits without ordering one size at a time. For a main axis belt, the lengths here are too short.
Checking the fit
Measure the path around both pulleys with a string, or check the length your mod calls for, then pick the nearest belt. Choose the KALIONE set if you build or modify printers and need short 6mm belts; choose a 2m open GT2 roll with clamps if you are replacing an Ender-style X or Y belt.
Before you order
Checks for the KALIONE belt set.
Check before you buy
- You need a short 6mm GT2 belt
- You know the length you need
- You will confirm open versus loop
- It is not for a main X or Y axis
The product at a glance
KALIONE 8-Piece GT2 Belt Set
Best for: Short belt drives
- Primary Material
- fiber-reinforced rubber
- Color
- Black
- Dimensions
- 5.12 × 3.54 × 0.71 inches
View on Amazon: KALIONE 8-Piece GT2 Belt Set Affiliate link
KALIONE eight 6mm GT2 belts, 110-400mm, fiber-reinforced rubber; listing says open, lengths suggest loops.
Pros
- Eight lengths in one set
- Low price
- Reinforced rubber
Cons
- Open vs loop unclear
- Too short for main axes
Good fit if
- You build printer mods
- You need a short belt
Skip if
- You need a 2m axis belt
Verdict: Handy for tinkerers once the type is confirmed.
Specifications side by side
| Spec | KALIONE 8-Piece GT2 Belt Set |
|---|---|
| Primary Material | fiber-reinforced rubber |
| Color | Black |
| Dimensions | 5.12 × 3.54 × 0.71 inches |
| Model | zahnriemen |
Frequently asked questions
What lengths come in the KALIONE set?
110, 112, 122, 158, 200, 280, 300 and 400mm.
Are the KALIONE belts open or closed loops?
The listing calls them open, but fixed lengths like these are usually loops; check before ordering.
What width are the KALIONE belts?
6mm.
What are the KALIONE belts made of?
Fiber-reinforced rubber.
Can I use a KALIONE belt for an Ender 3 X axis?
No, the longest is 400mm, far short of an X or Y belt.
Featured in
See also
- intarsio 68 piece 3d printer tool kit review
- intarsio 34 piece 3d printer tool kit review
- eujgoov kobra 3 timing belt kit review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- titleist gt2 driver review
- retrolife belt drive turntable review
