As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Zeelo Dual Drive Aluminum Extruder Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Zeelo Dual Drive Extruder (ZR-19081301) is a right-hand, red aluminum dual gear feeder for Bowden printers, and its selling point over other budget blocks is the wider fit list plus a 12-month warranty on all parts. Zeelo names the CR-10, CR-10S, CR-10S Pro, Ender 3 and Tornado, and the title adds the Anet A8, Anycubic Mega and Wanhao i3. Both gears are driven, so the filament is pinched from two sides for steadier feeding than a single-gear stock feeder. It arrives as parts for you to assemble, weighs 2.4oz, and the listing gives no gear ratio, filament diameter or contents list. This write-up uses the listing and published specs only.

What stands out

  • Right-hand dual drive feeder
  • Aluminum, 2.4oz, red
  • 12-month parts warranty

Who it fits

Good fit for

i3-style and Creality Bowden owners (Ender 3, CR-10, Anet A8, Anycubic Mega) whose extruder sits on the right side of the frame.

Who should skip it

Printers that need a left-hand mount, direct drive heads, or buyers who want a pre-assembled unit with instructions.

Verdict: A budget dual gear feeder with a broader fit list and a warranty; check the hand before ordering.

Zeelo extruder specs

Dual drive gears

Two-sided grip.

Right-hand version

Mounts on the right side.

Aluminum block, red

Metal lever arm.

2.4oz

Listed weight.

Model ZR-19081301

Listing code.

Ships as a DIY kit

Assembly needed.

Right hand vs left hand

Bowden feeders come mirrored. A right-hand unit has the lever and Bowden outlet set for a motor on the right of the frame, as on most Ender 3 and CR-10 printers. Check where your stock feeder sits and which way the filament enters before buying. The block, arm and idler are aluminum per the listing; gear material is not stated.

Setting up the Zeelo feeder

After assembly, set the idler spring so the filament is gripped firmly without the gears biting deep grooves, then run an E-step calibration. The bullets match other unbranded red dual gear blocks closely, so the Zeelo choice comes down to the warranty and the Anet A8, Mega and Wanhao fit. Choose it if you own one of those i3 clones; for a Creality-only setup a cheaper block of the same style also works.

Before you order

Checks for the Zeelo dual drive extruder.

Check before you buy

  • Your feeder mounts on the right-hand side
  • Your printer is on the fit list (CR-10, Ender 3, Anet A8, Mega, Wanhao i3)
  • You can assemble it from photos
  • You will recalibrate E-steps

The product at a glance

Zeelo Aluminum Dual Drive Extruder

Best for: i3 clones and Creality Bowden

Primary Material
Aluminum alloy
Extruder Type
Dual Drive Extruder
Color
Red
Weight
2.4 ounces

View on Amazon: Zeelo Aluminum Dual Drive Extruder Affiliate link

Zeelo ZR-19081301 right-hand red aluminum dual drive Bowden extruder; fits CR-10, Ender 3, Anet A8, Anycubic Mega, Wanhao i3; 12-month warranty; DIY assembly.

Pros

  • Wide fit list
  • Dual gear drive
  • One-year warranty

Cons

  • Assembly needed
  • No ratio or diameter listed

Good fit if

  • You own an Anet A8, Mega or Ender 3
  • Your feeder sits on the right

Skip if

  • You need a left-hand feeder

Verdict: A warrantied budget dual gear feeder.

Specifications side by side

Spec Zeelo Aluminum Dual Drive Extruder
Primary Material Aluminum alloy
Extruder Type Dual Drive Extruder
Color Red
Weight 2.4 ounces
Size Dual Drive
Model ZR-19081301

Frequently asked questions

Which printers does the Zeelo extruder fit?

CR-10, CR-10S, CR-10S Pro, Ender 3, Tornado, Anet A8, Anycubic Mega and Wanhao i3, per the listing.

Is this the left or right hand Zeelo extruder?

Right hand.

Does the Zeelo extruder have a warranty?

Yes, 12 months on all parts.

Does it arrive assembled?

No, the aluminum block is a DIY build.

What does the Zeelo extruder weigh?

2.4oz per the listing.

See also