As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Wefuit JUUPINE Smooth and Textured PEI Plate Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

One smooth side and one textured side is the reason to pick this plate over a double-textured sheet. The listing is sold under the Wefuit brand but titled JUUPINE. It is a spring steel sheet for Bambu Lab X2D, P2S, P1P, P1S, X1, X1C, X1E and A1 printers: smooth PEI gives glossy, flat print bottoms, and textured PEI gives a matte finish with stronger grip. JUUPINE rates the smooth side to 260°C and the textured side to 300°C and lists PLA, PETG, ABS, TPU, nylon, PC, PA, ASA and PVA. Prints come off by flexing the steel once the plate has cooled. One detail to check: the title says 256x256mm while the bullets say 257x257mm, Bambu's bed size, and JUUPINE asks buyers to confirm their bed size. Details come from the JUUPINE listing.

What stands out

  • Smooth PEI plus textured PEI
  • Smooth 260°C, textured 300°C
  • For 257mm Bambu Lab beds

Who it fits

Good fit for

Bambu Lab owners who switch between glossy PLA bottoms and textured PETG or ABS prints and want both on one sheet.

Who should skip it

Anyone who wants two textured faces to flip, and buyers bothered by the 256 vs 257mm size conflict.

Verdict: A flexible all-rounder plate for Bambu Lab printers.

JUUPINE smooth/textured plate specs

Smooth PEI side

Rated 260°C.

Textured PEI side

Rated 300°C.

257 × 257mm in bullets

Title says 256 × 256mm.

Spring steel

Flex to release.

X2D, P2S, P1P, P1S, X1 series, A1

Listed printers.

Nine listed filaments

PLA to PVA.

Which side for which print

Use the smooth side when you want a glossy, flat bottom on PLA parts such as signs or lids. Use the textured side for PETG, which can bond too hard to smooth PEI, and for ABS and nylon parts where grip matters more than finish. JUUPINE says the textured side holds even without heating; treat that as a maker claim and keep the bed at your normal temperature.

Use and care

Let the plate cool before removing prints so the coating is not damaged, clean it with IPA and keep fingers off the print area. Choose this JUUPINE plate for one smooth and one textured surface; choose a double-textured sheet if you print almost only on textured PEI and want to flip it as it wears.

Before you order

Checks for the JUUPINE smooth and textured plate.

Check before you buy

  • Your Bambu Lab bed is 257mm
  • You want both a smooth and a textured face
  • You let plates cool before removing prints
  • You keep IPA for cleaning

The product at a glance

Wefuit 257x257mm Smooth and Textured PEI Sheet

Best for: Mixed-filament Bambu Lab users

Primary Material
spring steel
Dimensions
256x256mm
Maximum Temperature
300℃
Build Surface Type
smooth and textured PEI
Build Plate Material
PEI, Spring Steel

View on Amazon: Wefuit 257x257mm Smooth and Textured PEI Sheet Affiliate link

Wefuit's JUUPINE spring steel plate for 257mm Bambu Lab beds: smooth PEI (260°C) and textured PEI (300°C) sides; title says 256mm.

Pros

  • Two finishes on one plate
  • Wide filament list
  • Flex release

Cons

  • Size conflict on the listing
  • One textured face only

Good fit if

  • You want glossy and matte bottoms
  • You print PETG on Bambu Lab printers

Skip if

  • You never print on a smooth JUUPINE side

Verdict: A versatile spare plate for Bambu Lab owners.

Specifications side by side

Spec Wefuit 257x257mm Smooth and Textured PEI Sheet
Primary Material spring steel
Dimensions 256x256mm
Maximum Temperature 300℃
Build Surface Type smooth and textured PEI
Build Plate Material PEI, Spring Steel
Surface Finish Smooth, Textured
Size For X2D/P2S/P1P/P1S/A1/X1/X1C/X1E
Color PEI Smooth+PEI Textured

Frequently asked questions

Which sides does the JUUPINE plate have?

Smooth PEI on one side and textured PEI on the other.

What temperatures can the JUUPINE PEI sides take?

260°C for the smooth side and 300°C for the textured side.

Is the JUUPINE plate 256mm or 257mm?

The title says 256 × 256mm, the bullets 257 × 257mm; confirm your bed size.

Who sells the JUUPINE plate?

It is listed under the Wefuit brand.

Which Bambu Lab printers fit the JUUPINE plate?

X2D, P2S, P1P, P1S, X1, X1C, X1E and A1.

See also