As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Wefuit 60ml Liquid Glue for Bambu Lab Printers Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Wefuit's 60ml liquid glue is sold for Bambu Lab printers, but its surface list is much wider than one brand. The listing names PLA, PETG, PET, ABS, ASA and TPU, and surfaces from low- and high-temperature plates to textured and smooth sheets, glass, PEI, PEO, PET, BuildTak and aluminum. The glue is water-soluble, so a damp cloth or a rinse cleans the plate, and Wefuit says it leaves almost no residue on the plate or the print. The bottle has a press-to-open applicator head for spreading a thin, even layer, and Wefuit recommends a fresh thin coat before each job. It is listed as odorless. Compared with a glue stick, a liquid spreads more evenly and is quicker to apply. Claims about speed and success rates are Wefuit's own; the facts we use come from the Wefuit listing.

What stands out

  • 60ml bottle
  • Water-soluble, cleans with water
  • Press-to-open applicator

Who it fits

Good fit for

Bambu Lab and other printer owners who want a liquid glue with a stated volume for PETG, ABS, ASA or TPU on smooth or glass surfaces.

Who should skip it

Buyers who want Bambu Lab's own branded glue, and anyone printing only PLA on textured PEI without problems.

Verdict: A practical third-party bed glue with a clear volume and a broad surface list.

Wefuit 60ml glue specs

60ml

Stated volume.

PLA, PETG, PET, ABS, ASA, TPU

Listed filaments.

PEI, PEO, PET, glass, BuildTak, aluminum

Listed surfaces.

Water-soluble

Wipe off with water.

Press-to-open tip

Even spread.

Green

Listed color.

Liquid glue versus a stick

Glue sticks leave streaks and lumps that show on the bottom of a print. A liquid spreads into a thin film and dries evenly. The water-soluble formula matters for cleanup: rinse the plate or wipe it with a wet rag instead of scraping. On PETG, the glue layer also acts as a release barrier so the print does not tear the plate's surface.

Using it

Press the tip onto a cool, clean plate and spread a thin layer across the print area. Re-apply a thin coat before each job, as Wefuit advises, and rinse when it builds up. Choose the Wefuit glue for a stated 60ml and a wide surface list; choose Bambu Lab's own Liquid Glue if you prefer the official bottle.

Before you order

Checks for Wefuit liquid glue.

Check before you buy

  • You print on smooth, glass or PEO surfaces
  • You print PETG, ABS, ASA or TPU
  • You can rinse your plate with water
  • You want a stated 60ml volume

The product at a glance

Wefuit 60ml Green Liquid Bed Adhesive

Best for: Smooth and glass beds

Compatible Material
PLA, PETG, ABS, TPU
Color
Green

View on Amazon: Wefuit 60ml Green Liquid Bed Adhesive Affiliate link

Wefuit 60ml water-soluble liquid glue with press-to-open tip for PLA, PETG, ABS, ASA and TPU on most bed surfaces.

Pros

  • Stated 60ml volume
  • Cleans with water
  • Wide surface list

Cons

  • Third-party, not Bambu Lab branded
  • Performance claims are the maker's

Good fit if

  • You print PETG or ABS on smooth plates
  • You want an even liquid layer

Skip if

  • Your textured PEI already holds well

Verdict: A sound alternative to branded bed glue.

Specifications side by side

Spec Wefuit 60ml Green Liquid Bed Adhesive
Compatible Material PLA, PETG, ABS, TPU
Color Green

Frequently asked questions

How much glue is in the Wefuit bottle?

60ml.

Which surfaces does Wefuit glue work on?

Low- and high-temperature plates, textured and smooth sheets, glass, PEI, PEO, PET, BuildTak and aluminum.

How do I clean Wefuit glue off a plate?

It is water-soluble; use water or a wet rag.

Is the Wefuit glue only for Bambu Lab printers?

No, the surface list covers most printer beds.

Which filaments does Wefuit list for its glue?

PLA, PETG, PET, ABS, ASA and TPU.

See also