UniTak3D 257x257mm Double-Sided PEI Build Plate Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
A spare or upgraded bed sheet is one of the cheapest ways to improve a Bambu Lab printer, and UniTak3D's 257×257mm spring steel plate gives two surfaces in one: grippy black texture on the top face, flat glossy PEI underneath. It is listed for the X2D, P2S, P1S, P1P, A1, X1, X1C and X1E, and costs under $25. Heat ratings are 300°C for the textured face and 200°C for the glossy one, and names PLA, ABS, ASA, PETG, TPU, nylon/PA and PC as printable. The smooth side needs glue stick for everything except PLA. We have not used this plate; the summary follows the listing.
What stands out
- Textured and smooth PEI on one sheet
- Fits eight Bambu Lab models
- Textured side rated to 300°C
- Flexes to pop parts off
Who it fits
Good fit for
Anyone with a full-size Bambu who wants a second sheet for quick job changes, or a smooth face for glossy bottoms alongside the grippy textured side.
Who should skip it
Wrong buy for anything other than a 257mm-bed Bambu, or if you want glue-free printing on both sides with PETG and engineering filaments.
Verdict: A versatile, low-cost two-sided plate for Bambu Lab owners.
Plate specs explained
257×257mm spring steel
Matches the magnetic bed of Bambu's full-size printers and the A1.
Textured side to 300°C
Grips most filaments and leaves a matte, patterned underside.
Smooth side to 200°C
Gives glossy bottoms; use glue stick for anything but PLA.
Model Uni104A1P
UniTak3D's code for this Bambu-size double-sided sheet.
Surface notes
UniTak3D says its black textured coating grips better than gold PEI, so parts stay put without glue, while the smooth face releases parts without bending the sheet. A protective film covers the glossy face and must come off before the first print. The listing claims genuine PEI powder coating but does not give the coating thickness.
Care and use
Each time you turn the sheet over, re-run bed leveling. Let the bed cool before removing prints to avoid tearing the coating, and wipe it with a soft cloth; UniTak3D warns against strong chemicals or detergents. PETG can bond very hard to smooth PEI, so use glue as a release layer.
Fit check
Confirm before ordering.
Check before you buy
- Your Bambu Lab printer has a 257mm bed
- You like having a matte and a glossy finish option
- You keep glue stick for PETG
- You will re-level after flipping
The product at a glance
UniTak3D 257x257mm Double-Sided PEI Build Plate
Best for: Bambu Lab owners wanting a second plate
- Primary Material
- Spring Steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 300℃
- Build Surface Type
- Smooth & Textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: UniTak3D 257x257mm Double-Sided PEI Build Plate Affiliate link
UniTak3D double-sided 257×257mm spring steel plate with textured (300°C) and smooth (200°C) PEI faces, sold for eight Bambu machines, from the A1 up to the X2D.
Pros
- Matte and glossy faces on one steel sheet
- Wide Bambu Lab fit
- Low cost
Cons
- Smooth side needs glue for non-PLA
- Re-level after flipping
- Coating thickness not given
Good fit if
- You own a P1S, X1C or A1
- You want a spare plate for quick swaps
Skip if
- Your printer is the 180mm A1 Mini
- You never want to use glue
Verdict: Handy two-sided spare plate for Bambu printers.
Specifications side by side
| Spec | UniTak3D 257x257mm Double-Sided PEI Build Plate |
|---|---|
| Primary Material | Spring Steel |
| Dimensions | 257x257mm |
| Maximum Temperature | 300℃ |
| Build Surface Type | Smooth & Textured PEI |
| Build Plate Material | PEI, Spring Steel |
| Build Plate Size | 257x257mm |
| Surface Finish | Smooth, Textured |
| Size | for Bambu Lab A1/P2S/P1S/P1P/X1C/X1/X1E/X2D |
| Color | Double Sided Smooth&Textured |
| Model | Uni104A1P |
Frequently asked questions
Which Bambu Lab printers take the UniTak3D 257mm plate?
X2D, P2S, P1S, P1P, A1, X1, X1C and X1E.
Do I need glue on the smooth PEI side?
Yes, for everything except PLA, according to UniTak3D.
How hot can the UniTak3D plate get?
Textured side 300°C, smooth side 200°C.
Does it fit the Bambu A1 Mini?
No; the A1 Mini is not listed, and this plate is 257×257mm.
