Best PEI Build Plates for 3D Printers: 7 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
PEI is the coating most FDM printers ship with, because prints stick when hot and release when cool. Our top pick is UniTak3D's double-sided plate for 257mm Bambu Lab beds: black textured PEI rated to 300℃ on one face, smooth PEI rated to 200℃ on the other. The Comgrow 235mm sheet is the cheapest pick, and the rest are cut for specific printers: the FLASHFORGE Adventurer 5M family, ELEGOO Centauri Carbon, Creality Hi, K2 Plus and the 310mm CR-10 family. Every plate fits one bed size, so start with your printer, then pick the surface. These 7 picks come from published listings.
Our top pick: UniTak3D 257x257mm Double-Sided PEI Build Plate.
Quick picks
The best fit for you
- You own a Bambu Lab A1, P1S or X1C UniTak3D 257x257mm Double-Sided PEI Build Plate 257mm, smooth and textured PEI.
- You own an Adventurer 5M or AD5X UniTak3D 235mm Dual-Sided PEI Spring Steel Sheet 235mm FLASHFORGE fit.
- You own a Centauri Carbon PEI Build Plate for Elegoo Centauri Carbon/Centauri Carbon 2,260x271MM | Double Sided Smooth&Textured Heated Bed,Easy Removal Spring Steel Plate Compatible with Elegoo Centauri Carbon 3D Printer 260x271mm, both PEI types.
- You print big parts on a K2 Plus Creality Official K2 Plus Build Plate, 370x370mm Textured PEI Sheet Magnetic Flexible Removable Spring Steel Printing Plate 3D Printer Bed Plate (Without Magnetic Base) 370x370mm official sheet.
- Your CR-10 V2 has no magnetic bed Creality 310x320mm Textured PEI Build Plate Sheet plus magnetic sticker.
- You want the cheapest PEI for a 235mm Ender Comgrow 235x235mm Textured PEI Spring Steel Sheet Single-sided textured sheet.
Our 7 picks
UniTak3D 257x257mm Double-Sided PEI Build Plate
Best for: Best overall
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- Spring Steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 300℃
- Build Surface Type
- Smooth & Textured PEI
View on Amazon: UniTak3D 257x257mm Double-Sided PEI Build Plate Affiliate link
UniTak3D double-sided PEI plate for Bambu Lab A1, P1P, P1S, P2S, X1, X1C, X1E and X2D (257x257mm): black textured PEI rated to 300℃ on one side, smooth PEI rated to 200℃ on the other, on spring steel.
Pros
- Two PEI surfaces on one Bambu plate
- Textured side grips without glue
- Heat ratings stated per side
Cons
- Smooth side needs glue for anything but PLA
- Re-level after flipping, UniTak3D says
Good fit if
- You own a P1S or A1 and want glossy and grippy bottoms
- You print PETG on the textured face
Skip if
- You want a cold plate for room-temperature PLA
Verdict: Two kinds of PEI for every 257mm Bambu.
UniTak3D 235mm Dual-Sided PEI Spring Steel Sheet
Best for: Best for FLASHFORGE
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- Spring steel
- Dimensions
- 235mm
- Maximum Temperature
- 300℃
- Build Surface Type
- Smooth, textured PEI
View on Amazon: UniTak3D 235mm Dual-Sided PEI Spring Steel Sheet Affiliate link
UniTak3D double-sided PEI plate for FLASHFORGE Adventurer 5M, 5M Pro and AD5X (235mm): textured PEI to 300℃ and smooth PEI to 200℃, listed for PLA through nylon, PC and PVA.
Pros
- Fits AD5M, AD5M Pro and AD5X
- Long filament list
Cons
- Smooth side needs glue except with PLA
Good fit if
- Your Adventurer 5M plate is scratched
- You print nylon or PC on an AD5M Pro
Skip if
- Your printer is not a FLASHFORGE
Verdict: A two-sided PEI spare for the Adventurer 5M family.
PEI Build Plate for Elegoo Centauri Carbon/Centauri Carbon 2,260x271MM | Double Sided Smooth&Textured Heated Bed,Easy Removal Spring Steel Plate Compatible with Elegoo Centauri Carbon 3D Printer
Best for: Best for ELEGOO
- Build Plate Material
- ✓ PEI, Spring Steel
- Surface Finish
- Smooth, Textured
UniTak3D double-sided PEI plate for ELEGOO Centauri Carbon and Centauri Carbon 2 (260x271mm): black textured PEI with more grip than gold PEI, smooth PEI for polished model bases; also fits 265x271mm beds.
Pros
- Made for Centauri Carbon
- Textured side needs no glue or tape
Cons
- Peel the film off the smooth side first
Good fit if
- You own a Centauri Carbon and want a second surface
- You want shiny bottoms on PLA parts
Skip if
- You print on a 235mm bed
Verdict: PEI both sides for the Centauri Carbon.
Creality Hi 280x265mm Double Sided PEI Plate
Best for: Best for Creality Hi
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- Spring steel
- Dimensions
- 280×265mm
- Maximum Temperature
- 100 ℃
- Build Surface Type
- Double sided PEI textured
View on Amazon: Creality Hi 280x265mm Double Sided PEI Plate Affiliate link
Creality Hi build plate (280x265mm): double-sided black textured PEI on spring steel, with a magnet rated not to lose grip at 100℃ and a list that runs from PLA to PA-CF and PC.
Pros
- Official Creality part
- Both sides textured
- Long material list
Cons
- No smooth side
- No temperature rating for the PEI
Good fit if
- Your Creality Hi Combo plate is worn
- You want two textured faces to rotate
Skip if
- You want a glossy bottom finish
Verdict: Official spare for the Creality Hi.
Creality Official K2 Plus Build Plate, 370x370mm Textured PEI Sheet Magnetic Flexible Removable Spring Steel Printing Plate 3D Printer Bed Plate (Without Magnetic Base)
Best for: Best large plate
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- Spring Steel
- Dimensions
- 370x370mm
- Build Surface Type
- Textured PEI
Creality K2 Plus plate (370x370mm): official textured PEI on spring steel, rated for PLA, ABS, ASA, PETG, TPU, PC, PA and CF blends; the spring steel sheet only, no magnetic base.
Pros
- Biggest PEI surface here
- Official K2 Plus part
- Wide material list
Cons
- Magnetic base not included
- Single textured side
Good fit if
- You print large ASA or PA-CF parts on a K2 Plus
- You want a second sheet ready during long print runs
Skip if
- You need the magnetic base as well
Verdict: A full-size official spare for the K2 Plus.
Creality 310x320mm Textured PEI Build Plate
Best for: Best kit with magnet
- Build Plate Material
- ✓ PEI
- Primary Material
- Spring Steel
- Dimensions
- 310 x 320 mm
- Build Surface Type
- Textured PEI
View on Amazon: Creality 310x320mm Textured PEI Build Plate Affiliate link
Creality gold textured PEI kit for Ender 3 Max Neo, CR-10S Pro, CR-10 V2 and V3 (310x320mm): spring steel sheet plus a soft magnetic sticker that installs with 3M adhesive in under 2 minutes; listed for PLA, PETG, PEEK and ABS.
Pros
- Magnetic base included
- Turns a fixed bed into a flexible one
Cons
- One textured side only
- Older CR-10 and Ender Max models
Good fit if
- Your CR-10 V2 still has a fixed bed
- You want prints to pop off by flexing
Skip if
- Your printer already has a magnetic base
Verdict: Adds PEI and a magnet to a 310mm Creality.
Comgrow 235x235mm Textured PEI Spring Steel Sheet
Best for: Best budget
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- Spring stainless steel, PEI
- Dimensions
- 235 x 235 mm
- Build Surface Type
- Textured PEI
- Build Plate Size
- 235x235mm
- Weight
- 1.06 pounds
View on Amazon: Comgrow 235x235mm Textured PEI Spring Steel Sheet Affiliate link
Comgrow single-sided PEI sheet (235x235mm): textured PEI powder on spring stainless steel with a magnetic base, sold for Neptune 3 Pro and 4, Kobra, Ender 3, Ender 3 V2, CR-20 and Ender 5; can be cut to size.
Pros
- Cheapest pick here
- Fits many 235mm printers
- Can be trimmed to fit
Cons
- One PEI side
- Low stock
Good fit if
- You own a Neptune 3 Pro or Ender 3 V2 and want PEI
- You want the cheapest PEI upgrade
Skip if
- You need a smooth PEI face
Verdict: A cheap textured PEI sheet for 235mm beds.
Specifications side by side
| Spec | UniTak3D 257x257mm Double-Sided PEI Build Plate | UniTak3D 235mm Dual-Sided PEI Spring Steel Sheet | PEI Build Plate for Elegoo Centauri Carbon/Centauri Carbon 2,260x271MM | Double Sided Smooth&Textured Heated Bed,Easy Removal Spring Steel Plate Compatible with Elegoo Centauri Carbon 3D Printer | Creality Hi 280x265mm Double Sided PEI Plate | Creality Official K2 Plus Build Plate, 370x370mm Textured PEI Sheet Magnetic Flexible Removable Spring Steel Printing Plate 3D Printer Bed Plate (Without Magnetic Base) | Creality 310x320mm Textured PEI Build Plate | Comgrow 235x235mm Textured PEI Spring Steel Sheet |
|---|---|---|---|---|---|---|---|
| Primary Material | Spring Steel | Spring steel | not stated | Spring steel | Spring Steel | Spring Steel | Spring stainless steel, PEI |
| Dimensions | 257x257mm | 235mm | not stated | 280×265mm | 370x370mm | 310 x 320 mm | 235 x 235 mm |
| Maximum Temperature | 300℃ | 300℃ | not stated | 100 ℃ | not stated | not stated | not stated |
| Build Surface Type | Smooth & Textured PEI | Smooth, textured PEI | not stated | Double sided PEI textured | Textured PEI | Textured PEI | Textured PEI |
| Build Plate Material | PEI, Spring Steel | PEI, Spring Steel | PEI, Spring Steel | PEI, Spring Steel | PEI, Spring Steel | PEI | PEI, Spring Steel |
| Build Plate Size | 257x257mm | not stated | not stated | not stated | not stated | not stated | 235x235mm |
| Surface Finish | Smooth, Textured | Smooth, Textured | Smooth, Textured | Textured | Textured | Textured | not stated |
| Weight | not stated | not stated | not stated | not stated | not stated | not stated | 1.06 pounds |
| Size | for Bambu Lab A1/P2S/P1S/P1P/X1C/X1/X1E/X2D | for Flashforge Adventurer 5M /5M Pro /AD5X | for Elegoo Centauri Carbon/Centauri Carbon 2 | Creality Hi | K2 Plus | Ender 3 Max Neo | 235*235mm |
| Color | Double Sided Smooth&Textured | Double Sided Smooth&Textured | Double Sided Smooth&Textured | PEI Frosted Black | Textured Black | PEI Frosted Gold | One-Sided Textured PEI |
| Model | Uni104A1P | Uni104F5MP | not stated | not stated | not stated | 3D-PEI-320x310 | COMCXTB2-CA1 |
How to choose a PEI build plate
-
Match the bed size exactly
Plates here run from 235mm to 370x370mm; a 257mm Bambu plate will not sit right on a 260x271mm Centauri bed.
-
Check whether a magnet is included
The K2 Plus sheet has no magnetic base; the Creality 310x320mm kit and Comgrow sheet include one.
-
Use glue on smooth PEI for PETG
UniTak3D recommends glue stick on the smooth side for every filament except PLA, which also stops PETG bonding too hard.
-
Let the plate cool before removing prints
UniTak3D advises waiting for the bed to cool; flexing a hot plate can bend it.
Frequently asked questions
Which PEI plate here fits the Bambu Lab A1?
The UniTak3D 257x257mm double-sided plate, which also fits P1P, P1S, P2S, X1, X1C, X1E and X2D.
What temperature can UniTak3D's textured PEI handle?
UniTak3D rates the textured side to 300℃ and the smooth side to 200℃.
Does the Creality K2 Plus PEI plate include a magnet?
No, Creality sells the 370x370mm spring steel sheet without the magnetic base.
Can I cut the Comgrow 235mm PEI sheet?
Comgrow says the flexible sheet can be cut to other sizes.
Is the Creality Hi plate smooth on one side?
No, both sides are textured black PEI.
See also
- best spring steel build plates
- best smooth build plates for 3d printers
- best textured build plates for 3d printers
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best space heater accessories with thermostat
- best nvme SSDs with 3D NAND






