UNIDO Ender 3 Coated Glass Bed 235x235mm Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The UNIDO glass bed is a 235x235x4mm tempered glass plate with a black microporous composite coating, sold for the Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 and Ender 5 Pro. The reason to fit one is a flat, rigid surface: glass hides small warps in an aluminum bed and gives the first layer a smooth, glossy finish. The coating grips while hot, then shrinks slightly as the bed cools so prints come away, which UNIDO says takes under a minute. The listing is a single bullet: it gives no temperature limit, filament list or clip count, and the title calls it Creality Official. Our summary rests on that listing alone.
What stands out
- 235 x 235 x 4mm tempered glass
- Microporous release coating
- Ender 3 and Ender 5 fit
Who it fits
Good fit for
Ender 3 or Ender 5 owners with a slightly warped bed or worn magnetic sheet who want a flat, glossy-bottomed surface.
Who should skip it
Anyone who wants to flex parts off a sheet, prints mostly textured bottoms, or has a bed not sized 235x235mm.
Verdict: A simple flat glass upgrade for 235mm Creality beds; bring your own clips.
UNIDO glass bed specs
235 x 235 x 4mm
Ender 3/5 bed size.
Tempered glass
Rigid and flat.
Black microporous coating
Release on cooling.
Model 6004010007
Listing code.
Clips
Not listed as included.
Max temperature
Not stated.
How the coating works
The microporous layer keys the first layer in while the bed is hot. As the glass and coating cool and shrink, the print breaks free, so you wait instead of scraping. At 4mm the glass adds mass to the bed, which slows heat-up a little and adds weight on a bed slinger's Y axis.
Fitting the UNIDO plate
Remove any magnetic sheet, clamp the glass on with bed clips at the corners, and lower the Z offset or re-run leveling, because 4mm of glass raises the surface. Clean it with isopropyl alcohol and let the bed cool fully before lifting prints. Pick this glass for flatness and glossy bottoms; pick a PEI spring steel sheet if you want to flex parts off quickly.
Before you order
Checks for the UNIDO coated glass bed.
Check before you buy
- Your bed is 235 x 235mm (Ender 3, 3 Pro, 3 V2, 5, 5 Pro)
- You have bed clips
- You can re-level for 4mm of glass
- You can wait for the bed to cool before removal
The product at a glance
UNIDO 235x235mm Coated Glass Bed
Best for: Flattening 235mm Ender beds
- Primary Material
- Tempered Glass
- Dimensions
- 235x235x4mm
- Color
- Black
- Build Plate Size
- 235x235mm
View on Amazon: UNIDO 235x235mm Coated Glass Bed Affiliate link
UNIDO 235x235x4mm tempered glass bed with black microporous coating for Ender 3/3 Pro/3 V2/5/5 Pro; releases prints as it cools.
Pros
- Flat, rigid surface
- Cool-down release
- Glossy first layer
Cons
- One-bullet listing
- Clips and heat limit not stated
Good fit if
- Your Ender bed is warped
- You like glossy bottoms
Skip if
- You want a flexible sheet
Verdict: A flat coated glass top for Ender beds.
Specifications side by side
| Spec | UNIDO 235x235mm Coated Glass Bed |
|---|---|
| Primary Material | Tempered Glass |
| Dimensions | 235x235x4mm |
| Color | Black |
| Build Plate Size | 235x235mm |
| Size | 235x235x4mm |
| Model | 6004010007 |
Frequently asked questions
Which printers fit the UNIDO glass bed?
Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 and Ender 5 Pro, per the listing.
How thick is the UNIDO glass plate?
4mm, at 235 x 235mm.
How do prints come off the UNIDO bed?
The coating releases them as the bed cools; UNIDO says within a minute.
Are clips included?
The listing does not say; plan to use your own.
What temperatures does the coating handle?
The listing does not state a limit.
See also
- koyofei 260x200mm fep film 6 pack review
- haldis blue dual gear bowden extruder review
- elegoo mars 4 5 fep film 5 pack review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- creality ender 3 v3 se review
- xuanpad official google TV review
