UGUESS Blue TPU 95A Filament Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
UGUESS Blue TPU 95A is a 1kg spool of 1.75mm flexible filament with a ±0.03mm tolerance, and its main strength is that the listing gives complete print settings: 190-230°C nozzle, 50-60°C bed and 50-120mm/s. Shore 95A is the common semi-flexible grade, firm enough to feed on most direct drive printers yet soft enough for watch bands, shoe insoles, phone cases and bumpers. The blue color suits visible wearable parts. UGUESS says each spool is pre-dried for 24 hours and vacuum packed with desiccant, and still advises drying for 7 hours before printing. We read the listing and published specs; nothing here comes from hands-on testing.
What stands out
- Shore 95A, 1.75mm ±0.03mm
- Full nozzle, bed and speed range listed
- Pre-dried and vacuum sealed
Who it fits
Good fit for
Owners of direct drive printers who want a blue flexible filament for straps, cases, grips and bumpers, with settings to start from.
Who should skip it
Bowden-only setups that struggle with soft filament, or anyone who needs rigid or heat-resistant parts.
Verdict: A clear, well-documented 95A TPU in blue; plan to dry it as the maker suggests.
UGUESS blue TPU at a glance
TPU, Shore 95A
Bends and rebounds, keeps shape.
1.75mm, ±0.03mm
Steady feed through the extruder.
Nozzle 190-230°C, bed 50-60°C
Listed starting window.
50-120mm/s print speed
Upper end is fast for TPU.
1kg blue spool
One color, full size.
Dry 7 hours before use
Maker advice for TPU.
How UGUESS describes the spool
The bullets cover abrasion, oil and aging resistance, which is what you want from parts that rub or flex daily, like grips and protective covers. Winding is machine-done with a manual check, per the listing. The spool measures roughly 8.1 x 8.5 x 2.8 inches as packed, so check a top-mounted holder or dry box has room.
Getting good blue TPU prints
Start in the middle of the 190-230°C window and keep speed toward the lower end of 50-120mm/s until the extruder feeds cleanly; flexible filament buckles when pushed too fast through a long tube. Pick the blue spool for parts people see, such as bands and cases; a black spool of the same UGUESS TPU hides wear and dirt better on insoles and robot feet. Store leftovers sealed with the desiccant.
Before you order
Quick checks for the UGUESS blue TPU 95A.
Check before you buy
- Your printer has a direct drive or tight filament path
- It reaches at least 230°C at the nozzle
- You have a dryer or oven for the suggested drying
- Blue suits the parts you plan to print
The product at a glance
UGUESS TPU 95A 1.75mm Filament
Best for: Blue flexible wearables
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 120 mm/s
- Dimensional Accuracy
- ±0.03mm
- Shore Hardness
- 95A
View on Amazon: UGUESS TPU 95A 1.75mm Filament Affiliate link
UGUESS TPU 95A in blue, 1kg of 1.75mm ±0.03mm filament with listed settings (190-230°C, bed 50-60°C, 50-120mm/s) and pre-drying.
Pros
- Complete print settings
- Standard 95A flexibility
- Vacuum packed with desiccant
Cons
- Still needs drying before use
- Not suited to loose Bowden paths
Good fit if
- You print visible flexible parts
- Your printer has a direct drive
Skip if
- You only own a long-Bowden printer
Verdict: A documented blue TPU for flexible parts.
Specifications side by side
| Spec | UGUESS TPU 95A 1.75mm Filament |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Max Print Speed | 120 mm/s |
| Dimensional Accuracy | ±0.03mm |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Size | 1KG |
| Application | Functional Parts |
| Dimensions | 8.5 × 8.11 × 2.8 inches |
| Weight | 2.2 pounds |
| Color | Tpu Blue 1kg |
Frequently asked questions
What hardness is UGUESS blue TPU?
Shore 95A, a semi-flexible grade that bends and springs back.
What settings does UGUESS list for this TPU?
Nozzle 190-230°C, bed 50-60°C and 50-120mm/s.
Should I dry the UGUESS blue spool?
The maker suggests 7 hours of drying before use, even though it ships pre-dried and sealed.
What is the tolerance of this TPU?
1.75mm with ±0.03mm.
What can I print with blue 95A TPU?
Watch bands, insoles, phone cases, bumpers and flexible robot parts, per the listing.
See also
- fysetc 5m gt2 6mm timing belt review
- capricorn xs 1m ptfe tube kit review
- polisi3d cr 10s pro dual gear extruder review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- tkid 3d printer kids review
- easycargo 30pcs 3d printer heatsink review
