POLISI3D CR-10S Pro Dual Gear Extruder Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The POLISI3D extruder (model p-905) is a red all-aluminum dual gear Bowden extruder for 1.75mm filament, designed as a replacement for the CR-10S Pro's stock unit and listed for the CR-10, CR-10S, Ender 3, Ender 3 Pro, Ender 5 and Tornado too. Its appeal is simple: two driven gears grip the filament from both sides, which pushes harder and slips less than the single-gear plastic MK8 feeder on older Creality printers. The listing is short. It says the block arrives as parts you assemble yourself and gives no gear ratio, gear material, motor or parts list. We built this review from the listing and published specs, not from hands-on testing.
What stands out
- Dual gear drive
- All-aluminum block in red
- Fits CR-10S Pro, Ender 3/5, CR-10
Who it fits
Good fit for
Owners of an Ender 3, Ender 5 or CR-10 with a cracked plastic extruder arm who want a cheap metal dual gear upgrade and are fine assembling it.
Who should skip it
Direct drive conversions, anyone who wants geared reduction for flexible filament, or buyers who need instructions and a parts list up front.
Verdict: A basic dual gear replacement for Creality Bowden printers; expect to work out assembly yourself.
POLISI3D extruder specs
Dual drive gears
Grip from both sides.
Aluminum alloy block, red
Replaces plastic arms.
Bowden, 1.75mm
Feeds a PTFE tube.
Model p-905
Listing code.
Ships unassembled
DIY build.
Gear ratio and parts list
Not stated.
Design of the p-905 block
The design follows the CR-10S Pro extruder: a lever arm with a spring presses the second gear against the filament. On Ender 3 and CR-10 printers it replaces the single-gear MK8 feeder, whose plastic arm is a known crack point. Because the listing does not say whether the gears are steel or brass or whether a spring and screws are included, check the photos before you order.
Fitting it to a Creality printer
Mount it on the stepper in place of the stock feeder, keep the same Bowden coupler position and recalibrate E-steps, since the drive gear diameter may differ from stock. Pick the POLISI3D unit if you want the lowest-cost metal dual gear feeder for a CR-10S Pro or Ender; pick a BMG-style geared extruder if you print TPU often.
Before you order
Checks for the POLISI3D dual gear extruder.
Check before you buy
- Your printer uses a Bowden setup with 1.75mm filament
- The stepper mounting matches an Ender/CR-10 feeder
- You can assemble the block from its photos
- You can recalibrate E-steps after fitting
The product at a glance
POLISI3D Dual Drive Aluminum Bowden Extruder
Best for: CR-10S Pro and Ender feeders
- Primary Material
- Aluminum alloy
- Extruder Type
- Bowden Extruder, Dual Drive Extruder
- Color
- Red
- Size
- 1.75Mm
View on Amazon: POLISI3D Dual Drive Aluminum Bowden Extruder Affiliate link
POLISI3D p-905 red aluminum dual gear Bowden extruder for 1.75mm, made for CR-10S Pro, also lists Ender 3/5, CR-10 and Tornado; DIY assembly.
Pros
- Dual gear grip
- Metal block replaces plastic arm
- Low price
Cons
- Thin listing, no parts list
- Assembly required
Good fit if
- Your stock arm is cracked
- You run a Creality Bowden printer
Skip if
- You want geared drive for TPU
Verdict: A budget metal feeder upgrade.
Specifications side by side
| Spec | POLISI3D Dual Drive Aluminum Bowden Extruder |
|---|---|
| Primary Material | Aluminum alloy |
| Extruder Type | Bowden Extruder, Dual Drive Extruder |
| Color | Red |
| Size | 1.75Mm |
| Model | p-905 |
Frequently asked questions
What printers does the POLISI3D extruder fit?
CR-10S Pro, CR-10, CR-10S, Ender 3, Ender 3 Pro, Ender 5 and Tornado, per the listing.
Is the POLISI3D extruder geared?
It is a dual gear drive; the listing gives no reduction ratio.
Does it come assembled?
No, the aluminum block needs assembling yourself.
What color is the p-905 extruder?
Red aluminum.
Does it work with 2.85mm filament?
No, it is listed for 1.75mm only.
Featured in
See also
- zeelo 10m gt2 6mm timing belt review
- zeelo dual drive aluminum extruder review
- comgrow 24 piece mk8 brass nozzle kit review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- apc back ups pro replacement battery review
- iron deer eco pro upgraded 200lbs review
