TMYPN Photon Mono X 6K / M3 Plus Screen Protector 8-Pack Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
TMYPN's kit holds eight 9.25-inch screen protector films for two printers only: the ANYCUBIC Photon Mono X 6K and Photon M3 Plus. Each film is 0.1mm PET with light transmittance above 95%, and TMYPN says it does not block the 405nm UV that cures resin. The point of a protector on a resin printer is the day the release film tears: resin that leaks onto a bare LCD can ruin a screen that costs far more than this pack, while a protector is peeled off and replaced. Eight films is a lot for one printer, which suits someone who changes the protector at every vat incident or keeps two machines. The box adds eight tool kits (usually wipes and dust stickers) and one plastic scraper. TMYPN notes that if the shading tape around the screen is too wide, it must be removed before fitting. The size field on the page lists 0.5 inches in height, which looks like a packing figure. This review is put together from TMYPN's listing and published specs, not from fitting a film.
What stands out
- Eight 9.25in PET films
- For Photon Mono X 6K and M3 Plus only
- 0.1mm, over 95% transmittance
- 8 tool kits plus one scraper
- Shading tape may need removing
Who it fits
Good fit for
Photon Mono X 6K or M3 Plus owners who want a cheap barrier between leaking resin and the LCD, with plenty of spares.
Who should skip it
Owners of any other printer, including the Mono X 6Ks, and anyone who would rather not lift shading tape around the screen.
Verdict: A large stock of cheap LCD insurance for two ANYCUBIC printers.
TMYPN 9.25in film specs
9.25 inch
Sized for the Mono X 6K and M3 Plus screens.
0.1mm PET
Thin film that does not change print volume, per TMYPN.
Over 95% transmittance
Little loss of 405nm UV through the film.
8 films + 8 tool kits
One kit per fitting.
Model TN0066
TMYPN's part code.
What the TMYPN film protects against
The LCD sits under the vat, and a pinhole in the release film lets resin pool on the screen. A PET protector takes that resin instead, along with scraper slips during cleaning. Because the film is so thin, TMYPN says print volume is unchanged and exposure should not need adjusting.
Fitting a TMYPN film to a Photon Mono X 6K
Clean the screen with the wet and dry wipes from one tool kit, lift dust with the sticker, then lay the film from one edge, pressing out air with the scraper. If the black shading tape around the screen overlaps the film area, TMYPN says to remove it first. Replace the film after any leak rather than wiping cured resin off it.
Before buying the TMYPN 9.25in 8-pack
Checks.
Check before you buy
- Your printer is a Photon Mono X 6K or Photon M3 Plus
- You can lift the shading tape on that screen if needed
- Eight Mono X 6K films suit how often you replace them
The product at a glance
TMYPN 9.25" Screen Protector for Anycubic
Best for: Mono X 6K screen care
- Primary Material
- PET
- Dimensions
- 9.25 x 9.25 x 0.5 inches
- Film Thickness
- 0.1mm
- Printing Technology
- Resin
View on Amazon: TMYPN 9.25" Screen Protector for Anycubic Affiliate link
TMYPN 8-pack of 9.25in 0.1mm PET screen protectors for the Photon Mono X 6K and M3 Plus, over 95% transmittance, with tool kits and a scraper.
Pros
- Eight films per box
- Thin, high-transmittance PET
- Tool kit with each film
Cons
- Two printers only
- Shading tape may need removal
- Odd 0.5in size field
Good fit if
- You own a Mono X 6K or M3 Plus
Skip if
- Your printer is a Mono X 6Ks or other model
Verdict: Cheap screen insurance for two ANYCUBIC printers.
Specifications side by side
| Spec | TMYPN 9.25" Screen Protector for Anycubic |
|---|---|
| Primary Material | PET |
| Dimensions | 9.25 x 9.25 x 0.5 inches |
| Film Thickness | 0.1mm |
| Printing Technology | Resin |
| Size | Photon Mono X 6K, M3 Plus |
| Model | TN0066 |
Frequently asked questions
Which printers does the TMYPN 9.25-inch protector fit?
Only the ANYCUBIC Photon Mono X 6K and Photon M3 Plus, per the listing.
How thick is the TMYPN 9.25-inch screen film?
0.1mm PET.
Does the TMYPN film block the UV for curing?
TMYPN says transmittance is over 95% and 405nm UV passes through.
What is in the TMYPN 8 PCS 9.25-inch box?
Eight films, eight tool kits and one plastic scraper.
See also
- chindrag photon mono 4k ultra d2 integrated fep 2 pack review
- chindrag photon mono x 6ks screen protector 2 pack review
- bambu lab ams 2 pro review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- fernlandia 9 PCs pasta making review
- scanpan cx 8 10 25 review
