SUNLU Water Washable Resin (Dark Grey, 4kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is SUNLU's water washable resin in its largest size, a 4kg bottle in dark grey, for 395-405nm LCD, DLP and SLA printers (SUNLU names 2K, 4K and 8K machines). The selling point of the formula is cleanup: printed parts can be rinsed in water instead of isopropyl alcohol, which saves buying and storing large amounts of solvent. Note that the listing contradicts itself here: one bullet says water replaces IPA, another says to clean with isopropyl alcohol or ethanol; read it as water being enough, with alcohol also working. SUNLU also claims low shrinkage, fast curing and a light odor that fades quickly after printing. The 4kg bottle is for people who print every day, run more than one printer, or fill large vats, where buying in bulk means fewer reorders. Dark grey is a neutral base for painted miniatures and display models. There are no exposure times, viscosity or hardness figures. This review uses SUNLU's listing and spec fields; we did not print with it.
What stands out
- Water washable resin, dark grey, 4kg
- 395-405nm LCD/DLP/SLA
- Rinse in water (IPA or ethanol also listed)
- Low shrinkage, fast curing (SUNLU claims)
- No exposure settings listed
Who it fits
Good fit for
Daily resin printers, multi-printer setups and large-vat owners who want to skip IPA and buy one dark grey resin in bulk.
Who should skip it
New users who have not tried water-washable resin yet, and anyone who needs tough or flexible engineering resin.
Verdict: A bulk dark grey water-washable resin for heavy use; try a smaller bottle first if you are new to it.
SUNLU 4kg water washable specs
4kg bottle
Bulk size for daily or multi-printer use.
Water washable
Rinse parts in water instead of IPA.
395-405nm
Fits most LCD, DLP and SLA printers.
Dark grey
Neutral base for painting and display models.
Wash advice conflicts
One bullet says water, another IPA or ethanol.
Who a 4kg bottle of washable resin suits
Water washable resin removes the biggest running cost and storage problem of resin printing, which is large amounts of IPA. At 4kg, it suits someone printing miniatures in batches, running a small print farm, or filling a large vat. The trade-off with bulk is time: resin should be used within its shelf life and kept dark and sealed, so only buy 4kg if you will get through it.
Printing and washing SUNLU dark grey
SUNLU gives no exposure times, so run a calibration print first; dark resins often need a little more exposure than light grey. Shake the bottle well before each pour. Rinse parts in water, then let them dry fully before curing to avoid white marks. Wash water still holds uncured resin: cure it in sunlight or under UV and filter out the solids before disposal, never pour it down the drain.
Before buying SUNLU 4kg dark grey
Checks.
Check before you buy
- You print enough to use 4kg of SUNLU resin
- You want water washing for SUNLU dark grey parts
- You will run an exposure test for SUNLU dark grey
- You can cure SUNLU wash water before disposal
The product at a glance
SUNLU 4kg Water Washable Resin
Best for: Heavy resin users
- Resin Type
- Water Washable
- Curing Wavelength
- 395-405nm
- Compatible Technology
- LCD, DLP, SLA
- Net Weight
- 4kg
- Cleaning Method
- Water
- Printing Technology
- Resin
View on Amazon: SUNLU 4kg Water Washable Resin Affiliate link
SUNLU water washable resin 4kg dark grey: 395-405nm, water rinse, low shrinkage and light odor claimed; no exposure data, wash advice conflicts.
Pros
- Water rinse instead of IPA
- 4kg bulk bottle
- Neutral dark grey for painting
Cons
- No exposure settings
- Wash bullets conflict
- Bulk size needs steady use
Good fit if
- You print resin daily or on several printers
Skip if
- You are new to water-washable resin
Verdict: A bulk dark grey water-washable resin.
Specifications side by side
| Spec | SUNLU 4kg Water Washable Resin |
|---|---|
| Resin Type | Water Washable |
| Curing Wavelength | 395-405nm |
| Compatible Technology | LCD, DLP, SLA |
| Net Weight | 4kg |
| Cleaning Method | Water |
| Printing Technology | Resin |
| Features | High Precision, Low Shrinkage, Fast Curing |
| Size | XXL-4000g |
| Color | 4000g-Dark Grey |
| Model | SUNLU Water Washable 3D Printer Resin |
Frequently asked questions
Can SUNLU 4kg dark grey resin be washed in water?
Yes, SUNLU says parts can be rinsed in water instead of IPA; another bullet also mentions IPA or ethanol.
Which printers work with SUNLU 4kg water washable resin?
395-405nm LCD, DLP and SLA printers, including 2K, 4K and 8K machines.
What exposure settings does SUNLU list for this 4kg resin?
None; run a calibration print first.
Does SUNLU 4kg dark grey resin smell?
SUNLU says the odor is light and fades quickly after printing.
How do I dispose of SUNLU water-washable rinse water?
Cure the resin in it under UV or sunlight, filter out the solids, and do not pour it down the drain.
Featured in
See also
- inslogic flexible 70a resin black 1kg review
- elegoo saturn 4 12k resin 3d printer review
- original prusa core one corexy DIY review
- sunlu 2000g abs like grey resin review
- sunlu high clear resin review
- SUNLU Standard Resin Plus Dark Grey 1kg Review (2026): A Spec-Based Look
- SUNLU 3kg Water Washable Resin Review: Specs, Pros and Cons
- SUNLU 1kg Nylon-Like Resin Review: Who It Fits and Who Should Skip It
- aquatrol water softener resin softener review
- express water rouv10d review
