Inslogic Flexible 70A Resin (Black, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Inslogic Flexible 70A is a 405nm photopolymer resin, sold here as a 1kg bottle in black, for MSLA and other UV resin printers. It is not a 3D printer. Its job is soft parts: Inslogic rates it at Shore 70A, which is in the range of a pencil eraser or a firm shoe sole, so prints bend, twist and squash and then return to shape. The listing also claims good tear resistance in thin sections, a dry, non-sticky surface after printing, low viscosity and low odor. That makes it a fit for gaskets, grips, bumpers, wearable prototypes and flexible hinges rather than display models. What the bottle page does not give: exposure times, elongation at break, tensile strength or a cure schedule, and it names no specific printers beyond the 405nm wavelength. We wrote this from Inslogic's listing and spec fields, not from our own prints.
What stands out
- Shore 70A flexible resin, 1kg, black
- 405nm UV photopolymer
- Tear resistant in thin sections (Inslogic claim)
- Low viscosity, low odor
- No exposure or elongation data listed
Who it fits
Good fit for
Resin printer owners who need soft, rubber-like parts such as seals, grips, bumpers or wearable test pieces in black.
Who should skip it
Anyone after rigid display models or tough functional parts, and FDM users: this is liquid resin, not filament.
Verdict: A soft 70A resin for flexible parts; plan your own exposure tests because the listing gives none.
Inslogic Flexible 70A: what the numbers mean
Shore 70A
Soft and rubbery; bends and compresses, then springs back.
405nm
Cures in standard LCD/MSLA resin printers.
1kg black bottle
Enough for many small gaskets and grips; black hides marks.
Low viscosity
Flows back under the plate more easily than thick flexible resins.
No settings listed
Exposure, elongation and cure times must be tested.
How Inslogic 70A behaves in a part
Shore 70A sits between soft TPU-like rubber and harder flexible blends. Thin walls will feel floppy; thicker walls feel firm but still give under a thumb. Inslogic stresses tear resistance, which matters for clips and seals that get stretched over an edge. The listing says the surface comes out dry rather than tacky, so dust should not cling to finished parts. Black resin also hides small surface marks better than clear or white.
Printing tips for Inslogic Flexible 70A
Soft resins need more care than standard grey. Support thin flexible parts generously, because they can sway during peel. Since Inslogic lists no exposure times, print a calibration test at your printer's standard-resin values and adjust from there. Wash gently: flexible prints can tear if you scrub them. Post-cure lightly at first, as heavy curing can make soft resin stiffer than you want.
Checklist for the Inslogic 70A bottle
Checks.
Check before you buy
- Your printer cures at 405nm
- You need Inslogic's soft 70A feel, not a rigid resin
- You can run your own Inslogic 70A exposure test
- Black suits your flexible Inslogic parts
The product at a glance
Inslogic Flexible 70A 3D Printer Resin 1kg
Best for: Soft resin parts
- Resin Type
- Flexible
- Curing Wavelength
- 405nm
- Net Weight
- 1kg
- Application
- Moving or wearable parts
- Shore Hardness
- 70A
- Printing Technology
- Resin
View on Amazon: Inslogic Flexible 70A 3D Printer Resin 1kg Affiliate link
Inslogic Flexible 70A resin, 1kg black: Shore 70A, tear resistant and low odor per the listing; no exposure or elongation data.
Pros
- Shore 70A rubber-like feel
- Tear resistance claimed for thin walls
- Dry, non-tacky surface listed
Cons
- No exposure settings
- No elongation or tensile figures
- Only black in this bottle
Good fit if
- You print soft seals, grips or bumpers on a 405nm printer
Skip if
- You want rigid models or need datasheet numbers
Verdict: A black 70A resin for soft functional parts.
Specifications side by side
| Spec | Inslogic Flexible 70A 3D Printer Resin 1kg |
|---|---|
| Resin Type | Flexible |
| Curing Wavelength | 405nm |
| Net Weight | 1kg |
| Application | Moving or wearable parts |
| Shore Hardness | 70A |
| Printing Technology | Resin |
| Features | Fast Curing |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | 1kg Flexible 70A Resin Black |
Frequently asked questions
How soft is Inslogic Flexible 70A resin?
Shore 70A: rubber-like, close to an eraser, and it springs back after bending.
Does the Inslogic 70A listing give exposure settings?
No. Start from your printer's standard values and run a calibration print.
What printers can use Inslogic Flexible 70A?
Resin printers that cure at 405nm; no models are named on the page.
What can I make with Inslogic 70A black resin?
Gaskets, grips, bumpers, flexible hinges and wearable prototypes.
Is Inslogic Flexible 70A a filament?
No, it is liquid photopolymer resin for UV resin printers.
Featured in
See also
- elegoo saturn 4 12k resin 3d printer review
- original prusa core one corexy DIY review
- original prusa mk4s DIY kit review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- tkid 3d printer kids review
- hyako s1 3d flexible back review
