SUNLU 3kg Water Washable Resin Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Buying water-washable resin by the 3kg is mostly about skipping alcohol: SUNLU says prints from this grey resin rinse clean in plain water, which saves both IPA cost and fumes when you print often. The rest of the listing is short. It cures fast at 395-405nm on most 2K, 4K and 8K LCD, DLP and SLA machines, SUNLU says it tuned settings across several printer brands so beginners get usable defaults, and shrinkage is kept low for accurate parts. The odor is called light and fades quickly after printing. The page does not say whether the 3kg arrives as one bottle or several, and one bullet talks about IPA or ethanol cleaning, so either works. It shows low stock at the moment. This review uses SUNLU's page only.
What stands out
- Water cleanup, no IPA needed
- 3kg supply for frequent printing
- Light odor that fades fast
Who it fits
Good fit for
Hobbyists who print several plates a week on a 2K-8K resin printer and want to stop buying isopropyl alcohol, especially in small rooms where fumes matter.
Who should skip it
Owners of 12K-16K printers chasing the finest detail, anyone who needs tough or heat-resistant parts, and anyone without a safe way to dispose of resin-contaminated rinse water.
Verdict: A bulk water-wash grey for frequent, simple printing; plan for rinse-water disposal.
Key points on the page
3000g, grey
Bulk supply; bottle split not stated.
Water washable
Rinse in water; IPA or ethanol also works per one bullet.
395-405nm, 2K/4K/8K
Fits most consumer LCD/DLP/SLA printers.
Low shrinkage
SUNLU's focus during development, for accurate sizes.
What the listing covers
SUNLU spends most of the page on cleaning and compatibility: settings tested on several printer brands, beginner-friendly behavior and low volume shrinkage. A 4kg listing of the same resin exists, and a dark grey 3kg version is sold alongside this grey one. No hardness, impact or heat data is given.
Washing and curing
Rinse prints in water straight off the plate, then dry them fully before post-curing, since trapped water can leave white marks. Cured or not, the rinse water holds uncured resin: let it sit in sunlight until the residue sets, filter it out, and never pour it down a drain.
Before buying
Checks.
Check before you buy
- You print often enough to use 3kg
- You have a plan for resin-laden rinse water
- Your printer sits in the 2K-8K class
- Your models are for display, not stress
The product at a glance
SUNLU Water Washable 3D Resin 3kg
Best for: Bulk water-wash printing
- Resin Type
- Water Washable
- Curing Wavelength
- 395-405nm
- Compatible Technology
- LCD, DLP, SLA
- Net Weight
- 3kg
- Cleaning Method
- Water, isopropyl alcohol, ethanol
- Printing Technology
- Resin
View on Amazon: SUNLU Water Washable 3D Resin 3kg Affiliate link
SUNLU water washable resin, grey, 3kg: rinses in water, fast-curing at 395-405nm for 2K-8K printers, low shrinkage, light odor; currently low stock.
Pros
- No alcohol needed
- Bulk quantity
- Beginner-friendly settings
Cons
- No strength data
- Bottle split not stated
Good fit if
- You print several plates a week
- You want to drop IPA
Skip if
- You run a 16K printer for minis
- You cannot handle rinse water safely
Verdict: A bulk water-wash resin for frequent prints.
Specifications side by side
| Spec | SUNLU Water Washable 3D Resin 3kg |
|---|---|
| Resin Type | Water Washable |
| Curing Wavelength | 395-405nm |
| Compatible Technology | LCD, DLP, SLA |
| Net Weight | 3kg |
| Cleaning Method | Water, isopropyl alcohol, ethanol |
| Printing Technology | Resin |
| Features | High Precision, Low Shrinkage, Fast Curing |
| Size | XL-3000g |
| Color | 3000g Grey |
| Model | SUNLU Water Washable 3D Printer Resin |
Frequently asked questions
Can SUNLU 3kg water washable resin also be cleaned with IPA?
Yes, one bullet says isopropyl alcohol or ethanol cleans it as well.
Does SUNLU's 3kg water washable resin come in one bottle?
The listing does not say how the 3000g is packed.
Which printers suit SUNLU water washable 3kg?
Most 2K, 4K and 8K LCD, DLP and SLA printers at 395-405nm.
Is there a bigger SUNLU water washable pack?
Yes, a 4kg listing of the same resin is sold too.
Featured in
See also
- sunlu 1kg nylon like resin review
- phrozen el400 elastic resin review
- monoprice mini delta v2 3d printer review
- sunlu 2000g abs like grey resin review
- sunlu high clear resin review
- SUNLU Standard Resin Plus Dark Grey 1kg Review (2026): A Spec-Based Look
- SUNLU Fast Curing Standard Resin 3kg (Grey) Review (2026)
- SUNLU Water Washable Resin (Dark Grey, 4kg) Review
- tkid 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
