SUNLU 1kg Nylon-Like Resin Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU's Nylon-Like resin sits above its ABS-like formula: the 1kg grey bottle is pitched as stronger and tougher than both ABS-like and standard resin, so supports snap off without breaking fine parts. Two details stand out on a page that otherwise gives no figures. SUNLU recommends printing at around 25°C, and it says engineers baked printed models in a 55°C dry box for three months without aging or cracking. Curing is at 395-405nm on LCD, DLP and SLA printers, shrinkage is described as low, and the bottle is SUNLU's leak-proof design. There are no tensile, elongation or impact numbers to compare against other tough resins. The stock level is low right now. These notes rely on SUNLU's listing alone.
What stands out
- Tougher than SUNLU's ABS-like, per the brand
- 55°C three-month aging test cited
- Supports come off without snapping parts
Who it fits
Good fit for
Printers of functional brackets, clips, cosplay parts and tabletop pieces that get handled, who want more toughness than ABS-like resin offers and can keep the resin near 25°C.
Who should skip it
Anyone who needs real datasheet numbers to pick a tough resin, people printing in a cold garage, and anyone after a flexible or rubbery result (this is tough, not elastic).
Verdict: A tougher step up for handled parts, backed by a heat-aging claim but no strength figures.
From the listing
1000g, grey
Single bottle; a 2kg listing also exists.
Nylon-like (PA-like) toughness
Stronger and less brittle than ABS-like, according to SUNLU.
Print at about 25°C
Warm resin flows and cures more evenly; heat a cold room or vat.
55°C for 3 months, no cracking
SUNLU's own aging test, not a heat-deflection rating.
Formula claims
SUNLU frames this as a polyamide-like resin: durable, with good aging behavior, and able to hold fine detail while staying tough enough for support removal. The aging test is useful context but it is not an HDT figure, so do not read it as a rated service temperature.
Printing tips
Keep the resin and room near 25°C, as the listing advises; tough resins thicken when cold. Wash in isopropyl alcohol and post-cure as usual. Exposure times for specific printers are not given, so begin with an ABS-like profile and run a test print.
Before buying
Checks.
Check before you buy
- Your room or vat can stay near 25°C
- You print parts that get handled or flexed slightly
- You can live without tensile data
- Your printer cures at 395-405nm
The product at a glance
SUNLU 1000g Nylon-Like Resin
Best for: Tough handled parts
- Resin Type
- Nylon-Like
- Curing Wavelength
- 395-405nm
- Compatible Technology
- LCD, DLP, SLA
- Net Weight
- 1000g
- Application
- Functional parts
- Printing Technology
- Resin
View on Amazon: SUNLU 1000g Nylon-Like Resin Affiliate link
SUNLU Nylon-Like resin, 1kg grey: tougher than ABS-like per SUNLU, low shrinkage, 395-405nm, print near 25°C, 55°C three-month aging test cited; low stock.
Pros
- Tough, not brittle
- Aging test cited
- Leak-proof bottle
Cons
- No strength figures
- Wants a warm print room
Good fit if
- You print handled functional parts
- Your ABS-like prints crack
Skip if
- You need a datasheet
- Your print room is cold
Verdict: A tougher SUNLU resin for handled parts.
Specifications side by side
| Spec | SUNLU 1000g Nylon-Like Resin |
|---|---|
| Resin Type | Nylon-Like |
| Curing Wavelength | 395-405nm |
| Compatible Technology | LCD, DLP, SLA |
| Net Weight | 1000g |
| Application | Functional parts |
| Printing Technology | Resin |
| Compatible Material | Nylon |
| Weight | 2.2 pounds |
| Color | 1000g Grey |
| Model | 3d printer resin nylon like resin |
Frequently asked questions
How warm should the room be for SUNLU 1kg Nylon-Like grey?
SUNLU recommends about 25°C.
Is SUNLU Nylon-Like resin tougher than its ABS-like?
SUNLU says yes: stronger and tougher than ABS-like and standard resin.
What heat can SUNLU Nylon-Like parts handle?
The listing cites a three-month bake at 55°C without aging or cracking, but gives no heat-deflection figure.
Is SUNLU Nylon-Like resin flexible?
It is described as tough and not brittle, not as flexible or elastic.
Featured in
See also
- phrozen el400 elastic resin review
- monoprice mini delta v2 3d printer review
- raise3d 101017001 pro2 plus 3d printer review
- sunlu 2000g abs like grey resin review
- sunlu high clear resin review
- SUNLU Standard Resin Plus Dark Grey 1kg Review (2026): A Spec-Based Look
- SUNLU 3kg Water Washable Resin Review: Specs, Pros and Cons
- SUNLU Fast Curing Standard Resin 3kg (Grey) Review (2026)
- anycubic resin 3d printer review
- easycargo 30pcs 3d printer heatsink review
