SUNLU Silk PLA 4kg Bundle (Light Gold, Silver, Blue, Green) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU's Silk PLA 4kg bundle gives you four full 1kg spools in light gold, silver, blue and green, and it suits people who print a lot of display pieces: vases, trophies, cosplay trim and gifts where a glossy finish saves sanding and paint. Light gold and silver cover the metallic look, while blue and green add color for decor. Each spool holds about 330m of 1.75mm filament at ±0.02mm. SUNLU's settings are slower than its regular PLA: 205-215°C nozzle, a 60-80°C bed and only 30-60mm/s, typical for silk, which loses shine when rushed. Spools are 8in across, 2.5in wide with a 2.2in hub, vacuum packed with desiccant. The listing claims low warping and no clogs without figures. Buying four colors at once only pays off if you will use all four; otherwise a single spool is cheaper to try. This write-up relies on SUNLU's listing.
What stands out
- 4 x 1kg: light gold, silver, blue, green
- 1.75mm ±0.02mm, ~330m per spool
- 205-215°C nozzle, 60-80°C bed
- 30-60mm/s print speed
Who it fits
Good fit for
Makers of vases, figurines, awards and props who want metallic gold and silver plus two colors, and print enough to use 4kg.
Who should skip it
Owners of high-speed printers who want to run fast profiles, and anyone needing matte or functional parts.
Verdict: A 4kg metallic-and-color silk set with clear slow-print settings.
SUNLU silk bundle specs explained
4kg in four colors
Light gold, silver, blue and green, 1kg each.
205-215°C nozzle
A narrow window: stay inside it for the shine.
60-80°C bed
Warmer than many PLA spools ask for.
30-60mm/s
Silk shine needs slow printing.
8in spool, 2.2in hub
Fits most standard holders.
What sets silk PLA apart
Silk PLA carries additives that leave a glossy, slightly metallic surface with no polishing, which is why light gold and silver read as metal on shelves. The trade-off is weaker layer bonding than plain PLA and fussier speeds; SUNLU nonetheless claims strong interlayer adhesion for this formula, without a number.
Printing the SUNLU gold, silver, blue and green set
Start at 210°C, the middle of 205-215°C, and a 60°C bed, then raise the bed toward 80°C only if the first layer lifts. Keep outer walls at the low end of 30-60mm/s; faster walls go dull. Vase mode suits these four colors well, since a single glossy wall shows the shine best. Reseal unused spools with the desiccant.
Before buying the SUNLU 4kg silk set
Checks.
Check before you buy
- You will use SUNLU light gold, silver, blue and green
- Your slicer can drop SUNLU silk walls to 30-60mm/s
- Your holder takes an 8in SUNLU spool with a 2.2in hub
The product at a glance
SUNLU Silk PLA Filament 1.75mm 4kg
Best for: Glossy decor in bulk
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 4kg
- Max Print Speed
- 60mm/s
- Dimensional Accuracy
- ±0.02mm
- Surface Finish
- Silk
View on Amazon: SUNLU Silk PLA Filament 1.75mm 4kg Affiliate link
SUNLU Silk PLA 4 x 1kg (light gold, silver, blue, green), 1.75mm ±0.02mm, ~330m per spool, 205-215°C, bed 60-80°C, 30-60mm/s, vacuum packed.
Pros
- Two metallics plus two colors
- Clear silk-specific settings
- Full 1kg spools
Cons
- Slow 30-60mm/s speeds
- 4kg is a big commitment
- Low-warp and no-clog claims unmeasured
Good fit if
- You print glossy decor and use metallic tones often
Skip if
- You want to print silk at high speed
Verdict: A solid bulk silk buy for decor printers.
Specifications side by side
| Spec | SUNLU Silk PLA Filament 1.75mm 4kg |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 4kg |
| Max Print Speed | 60mm/s |
| Dimensional Accuracy | ±0.02mm |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Finish | Silk |
| Dimensions | 16.1 × 5.51 × 7.87 inches |
| Weight | 8.82 pounds |
| Color | 1kg*4 Light Gold+silver+blue+green |
| Model | DCDE-SILK-LG+SV+BL+GN-1KG*4 |
Frequently asked questions
What colors come in this SUNLU silk PLA bundle?
Light gold, silver, blue and green, 1kg each.
What settings does SUNLU list for its silk PLA?
205-215°C nozzle, 60-80°C bed, 30-60mm/s.
How long is each SUNLU silk spool?
About 330m of 1.75mm filament.
Is the SUNLU 4kg silk bundle PLA or PLA+?
This listing is Silk PLA; SUNLU sells a separate Silk PLA+ line.
See also
- sunlu pa6 gf25 glass fiber nylon filament review
- sunlu fast curing standard resin clear 1kg review
- sunlu high speed abs filament 2 pack black review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
