SUNLU High Speed ABS Filament 2 x 1kg Black Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU High Speed ABS in the 2 x 1kg black pack is for owners of fast, enclosed printers who go through black ABS for functional parts: brackets, car interior clips, enclosures, jigs. SUNLU rates it up to 350mm/s and actually recommends running it at 300-350mm/s, with a hot 280-290°C nozzle and a 90-100°C bed. Heat deflection is listed at up to 91°C, the main reason to choose ABS over PLA for parts near motors or in a parked car. Two spools of one color suit batch work where switching colors mid-job is not wanted. SUNLU's spool is 20cm across, 6.8cm wide with a 5.5cm hub. The toughness and wear claims come without test figures. ABS also gives off fumes and warps in drafts, so an enclosure and ventilation are part of the cost. These notes come from SUNLU's listing and published settings.
What stands out
- 2 x 1kg, black
- Up to 350mm/s (recommended 300-350)
- 280-290°C nozzle, 90-100°C bed
- Heat deflection up to 91°C
Who it fits
Good fit for
Owners of enclosed CoreXY printers who print black functional ABS parts in volume and want to use their machine's speed.
Who should skip it
Open-frame or slow bed-slinger owners, and anyone without ventilation for ABS fumes.
Verdict: A speed-tuned black ABS pack for fast enclosed machines.
SUNLU rapid ABS settings explained
300-350mm/s
Made for fast machines; slower printers waste its tuning.
280-290°C nozzle
Hotter than many ABS spools; needs a capable hotend.
90-100°C bed
Standard ABS bed range.
91°C heat deflection
Holds shape well above PLA's limit.
20cm spool, 5.5cm hub
Fits most standard holders.
Why a rapid ABS
Ordinary ABS often tops out at modest speeds before layers weaken. SUNLU tunes this formula to flow fast at 280-290°C, so a high-speed printer can lay down ABS at 300-350mm/s while keeping what SUNLU calls a balance of speed and quality. It is pitched at machinery, molds, toys and car parts.
Printing the SUNLU black ABS twin pack
Use an enclosure to keep warm air around the part and avoid layer splits, and vent the room or use a filter. Start at 285°C and a 95°C bed, mid-range of SUNLU's numbers, and only push to 350mm/s once first layers stick reliably. Keep the second spool sealed in its vacuum bag until needed.
Before buying SUNLU High Speed ABS black x2
Checks.
Check before you buy
- Your printer is enclosed for SUNLU rapid ABS
- Your hotend reaches 290°C for SUNLU High Speed ABS
- You will use 2kg of black SUNLU ABS
The product at a glance
SUNLU High Speed ABS Filament 1kg
Best for: Fast black ABS batches
- Material Type
- ABS
- Net Weight
- 1KG
- Max Print Speed
- 350mm/s
- Printing Technology
- FDM
- Features
- High Speed
- Weight
- 4.41 pounds
View on Amazon: SUNLU High Speed ABS Filament 1kg Affiliate link
SUNLU High Speed ABS 2 x 1kg black: up to 350mm/s, 280-290°C, bed 90-100°C, 91°C heat deflection, 20cm spool with 5.5cm hub.
Pros
- Tuned for 300-350mm/s
- 91°C heat deflection
- Two spools of one color
Cons
- Needs 280-290°C and an enclosure
- ABS fumes need ventilation
- Toughness claims unmeasured
Good fit if
- You run a fast enclosed printer for black parts
Skip if
- Your printer is open-frame or slow
Verdict: A fast black ABS pack for enclosed high-speed printers.
Specifications side by side
| Spec | SUNLU High Speed ABS Filament 1kg |
|---|---|
| Material Type | ABS |
| Net Weight | 1KG |
| Max Print Speed | 350mm/s |
| Printing Technology | FDM |
| Compatible Material | ABS |
| Features | High Speed |
| Size | 1KG |
| Weight | 4.41 pounds |
| Color | 1kg*2 Black+black |
Frequently asked questions
What print speed suits the black SUNLU rapid ABS twin pack?
SUNLU rates it to 350mm/s and suggests running between 300 and 350mm/s.
What temperatures does SUNLU list for this rapid ABS?
280-290°C nozzle and 90-100°C bed.
What is the heat deflection temperature of SUNLU High Speed ABS?
Up to 91°C according to SUNLU.
What is in the SUNLU High Speed ABS 2 pack?
Two 1kg spools, both black.
See also
- amolen silk rainbow pla orange yellow blue pink review
- gizmo dorks tpu filament 200g blue review
- prusament asa prusa orange 800g filament review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- singer singer s0100 high speed review
- bunn csb3td speed brew high review
