SUNLU Fast Curing Standard Resin (Clear, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU's Fast Curing Standard Resin in Clear is a budget 1kg bottle for people who want see-through or tinted prints: lamp shades, light pipes, display cases for small parts, gem-like pieces, or a base you can tint yourself. It is the same standard formula SUNLU sells in gray and other colors, with low shrinkage, a light odor, a hard smooth surface that takes paint, and tolerance to weak acids and greases. Clean-up is with isopropyl alcohol or ethanol, not water. One detail needs checking: the title says 395-405nm, while a bullet says 365-405nm and claims fit with 99% of LCD, DLP and SLA printers; most hobby LCD printers use 405nm, so either reading covers them. SUNLU gives no exposure times, viscosity or hardness figures, so run a calibration print first. Clear resin shows every wash mark and can yellow under over-curing, so short cure times matter more than with gray. We reviewed the SUNLU listing, not printed samples.
What stands out
- Standard resin, clear, 1kg
- 395-405nm in title (365-405nm in bullets)
- IPA or ethanol wash
- Low shrinkage, light odor
Who it fits
Good fit for
Resin printers who want low-cost clear parts or a base to tint, and who are comfortable dialing in exposure themselves.
Who should skip it
Anyone who wants a water-washable resin, tough engineering parts, or published exposure settings out of the box.
Verdict: An inexpensive clear standard resin; good value if you calibrate it yourself.
SUNLU clear standard resin details
Clear, 1kg bottle
See-through prints or a base for tints.
395-405nm (365-405nm)
Fits common 405nm LCD printers; listing is inconsistent.
IPA or ethanol wash
Not water washable.
Low shrinkage
SUNLU's accuracy claim, no percentage given.
Leak-proof bottle
SUNLU's patented bottle design for shipping.
What the clear standard resin is for
Standard resins trade toughness for detail and price. SUNLU lists low shrinkage, a hard smooth surface and resistance to weak acids and greases, and calls it suitable for novices because of its fluidity. In clear, those traits suit display parts and light diffusers rather than snap-fit or load-bearing parts.
Working with SUNLU clear resin
Run an exposure test first, since the listing gives no settings. Wash in fresh IPA or ethanol: dirty alcohol leaves a cloudy film that shows on clear prints. Cure briefly and evenly; a clear coat or polishing step brings back transparency after sanding. Store the bottle away from sunlight, as with any UV resin.
Before buying SUNLU clear standard resin
Checks.
Check before you buy
- Your printer cures at 405nm for SUNLU clear resin
- You have IPA or ethanol to wash SUNLU clear prints
- You can run an exposure test for SUNLU clear resin
The product at a glance
SUNLU Standard 1kg UV Resin
Best for: Clear display parts
- Material Type
- Photopolymer Resin
- Net Weight
- 1kg
- Surface Finish
- Smooth
- Printing Technology
- SLA
- Features
- High Precision, Low Shrinkage, Fast Curing
- Resin Type
- Standard
View on Amazon: SUNLU Standard 1kg UV Resin Affiliate link
SUNLU Fast Curing Standard Resin, clear, 1kg: low shrinkage, light odor, IPA/ethanol wash, 395-405nm title vs 365-405nm bullet, no exposure data.
Pros
- Low-cost clear resin
- Light odor
- Takes paint and tints
Cons
- No exposure settings
- Wavelength range inconsistent
- Not water washable
Good fit if
- You want budget see-through prints
Skip if
- You need tough or water-washable resin
Verdict: A budget clear resin for display pieces.
Specifications side by side
| Spec | SUNLU Standard 1kg UV Resin |
|---|---|
| Material Type | Photopolymer Resin |
| Net Weight | 1kg |
| Surface Finish | Smooth |
| Printing Technology | SLA |
| Features | High Precision, Low Shrinkage, Fast Curing |
| Resin Type | Standard |
| Curing Wavelength | 405nm |
| Dimensions | 4.96 × 2.09 × 9.15 inches |
| Weight | 2.2 pounds |
| Size | M-1000g |
| Color | 1kg-clear |
| Model | Fast Curing 3D Printer Resin |
Frequently asked questions
What wavelength does SUNLU clear standard resin use?
SUNLU gives 395-405nm in the clear resin title and 365-405nm further down; either way, common 405nm printers are covered.
Is SUNLU standard clear resin water washable?
No. SUNLU lists isopropyl alcohol or ethanol for cleaning.
Does SUNLU list exposure times for this clear resin?
No, so print a calibration test first.
What is SUNLU standard clear resin good for?
Display parts, light diffusers, tinted pieces and other see-through prints that do not carry loads.
Featured in
See also
- sunlu high speed abs filament 2 pack black review
- amolen silk rainbow pla orange yellow blue pink review
- gizmo dorks tpu filament 200g blue review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- fender standard stratocaster review
- accuratex standard pillows set of review
