As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best 405nm 3D Printer Resins by Type in 2026: 7 Picks

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Nearly every LCD and DLP resin printer sold today cures at 405nm, so the useful question is which kind of 405nm resin fits the job. Our top pick is ELEGOO ABS-Like 3.0 in a 3000g bottle: tough enough to drill and thin enough to flow quickly between layers. ANYCUBIC's 500g basic resin is the cheapest pick. The others each cover one job: fine detail for 12K and 16K screens, tap-water cleanup, low odor across 355-410nm, bulk standard resin and 300°C heat resistance. Picks are based on published listings rather than bench tests.

Our top pick: ELEGOO ABS-Like 3.0 3000g Resin.

Quick picks

#ProductBest forPrice
1 ELEGOO ABS-Like 3.0 3000g Resin Best overall Best overall Check price of ELEGOO ABS-Like 3.0 3000g Resin on Amazon
2 Phrozen Aqua Hyperfine 405nm 1kg Resin Best for 12K and 16K screens Best for 12K and 16K screens Check price of Phrozen Aqua Hyperfine 405nm 1kg Resin on Amazon
3 ELEGOO Water Washable Resin 2.0 Grey 1kg Best water washable Best water washable Check price of ELEGOO Water Washable Resin 2.0 Grey 1kg on Amazon
4 ANYCUBIC Plant-Based Rapid Resin 2.0 Grey Widest light range Widest light range Check price of ANYCUBIC Plant-Based Rapid Resin 2.0 Grey on Amazon
5 SUNLU 3kg Standard 3D Printer Resin Best value bulk Best value bulk Check price of SUNLU 3kg Standard 3D Printer Resin on Amazon
6 Inslogic 1kg High Temp 3D Printer Resin Best for heat Best for heat Check price of Inslogic 1kg High Temp 3D Printer Resin on Amazon
7 ANYCUBIC 500g Grey 405nm UV Resin Best budget Best budget Check price of ANYCUBIC 500g Grey 405nm UV Resin on Amazon

The best fit for you

Our 7 picks

Best overall

ELEGOO ABS-Like 3.0 3000g Resin

Best for: Best overall

Resin Type
ABS-Like 3.0
Curing Wavelength
405nm
Compatible Technology
MSLA, DLP, LCD
Net Weight
3000g
Application
Functional prototypes, mechanical parts
Printing Technology
Resin

View on Amazon: ELEGOO ABS-Like 3.0 3000g Resin Affiliate link

ELEGOO ABS-Like 3.0 grey in a 3000g bottle (model AU-ABS3.0): tuned for 405nm LCD and DLP printers, built for impact resistance so parts take drilled holes, with viscosity ELEGOO puts 25-47% below its older resin.

Pros

  • Tough enough to drill
  • Low viscosity for fast layers
  • 3kg lasts many vat fills

Cons

  • Large upfront spend
  • Grey only in this size

Good fit if

  • You print snap-fit cases on a Saturn 4 Ultra
  • You refill the vat every week

Skip if

  • A 3kg bottle would sit open for months on your shelf

Verdict: A tough 405nm resin in a bulk bottle.

Best for 12K and 16K screens

Phrozen Aqua Hyperfine 405nm 1kg Resin

Best for: Best for 12K and 16K screens

Curing Wavelength
✓ 405nm
Compatible Technology
LCD, MSLA
Net Weight
1KG
Printing Technology
Resin
Features
Low Shrinkage
Surface Finish
Smooth

View on Amazon: Phrozen Aqua Hyperfine 405nm 1kg Resin Affiliate link

Read our full review

Phrozen Aqua Hyperfine, 1kg in red, made for 9K, 12K and higher-resolution LCD printers on 405nm light, officially tested on Phrozen printers and sold in five colors, with low odor and low viscosity.

Pros

  • Built for high-resolution screens
  • Low odor
  • Five colors

Cons

  • Low stock
  • No strength figures

Good fit if

  • You print 32mm minis on a 16K Sonic Mini
  • You want fine texture to show

Skip if

  • Your printer is a 4K model

Verdict: Fine-detail resin for high-res screens.

Best water washable

ELEGOO Water Washable Resin 2.0 Grey 1kg

Best for: Best water washable

Curing Wavelength
✓ 405nm
Resin Type
Water Washable
Compatible Technology
LCD
Net Weight
1000g
Cleaning Method
Water
Application
Tabletop models, industrial parts

View on Amazon: ELEGOO Water Washable Resin 2.0 Grey 1kg Affiliate link

Read our full review

ELEGOO Water Washable 2.0 grey, 1000g: rinses in tap water, with a stated viscosity of 109.40 mPa.s at 25°C, which ELEGOO says is 76% lower than its 1.0 version, for 405nm LCD printers.

Pros

  • No IPA needed
  • Viscosity figure published
  • Fast curing

Cons

  • Water-washable parts are not the toughest
  • Waste water still needs curing before disposal

Good fit if

  • You print in a flat without IPA storage
  • You want quick cleanup on a Mars 5

Skip if

  • You need drillable parts

Verdict: Tap-water cleanup on a 405nm printer.

Widest light range

ANYCUBIC Plant-Based Rapid Resin 2.0 Grey

Best for: Widest light range

Curing Wavelength
✓ 405nm
Resin Type
Plant-Based
Compatible Technology
LCD, DLP
Net Weight
1kg
Printing Technology
Resin
Features
High Speed, Low Odor

View on Amazon: ANYCUBIC Plant-Based Rapid Resin 2.0 Grey Affiliate link

Read our full review

ANYCUBIC Plant-Based Rapid Resin 2.0, 1kg grey, made from soybean oil with ultra-low odor and no BPA, rated for a 355-410nm band so it suits most LCD and DLP printers.

Pros

  • 355-410nm band covers older DLP units
  • Ultra-low odor
  • Storage range 15-35°C given

Cons

  • Spec weight shows 3.53 oz against a 1kg title
  • No strength data

Good fit if

  • You print indoors and hate resin smell
  • You own an older DLP printer

Skip if

  • You need functional parts

Verdict: A low-odor resin that cures across a wide band.

Best value bulk

SUNLU 3kg Standard 3D Printer Resin

Best for: Best value bulk

Curing Wavelength
✓ 405nm
Resin Type
Standard
Compatible Technology
LCD, DLP, SLA
Net Weight
3kg
Cleaning Method
Isopropyl alcohol or ethanol
Application
Hand-made printing

View on Amazon: SUNLU 3kg Standard 3D Printer Resin Affiliate link

Read our full review

SUNLU standard resin, 3000g grey, cured by 395-405nm UV, cleaned with isopropyl alcohol or ethanol, and pitched as low shrinkage with a hard, smooth surface that takes paint.

Pros

  • 3kg at a low cost per kilo
  • Paints easily
  • Resists weak acids and grease

Cons

  • Standard resin is brittle under load
  • IPA cleanup

Good fit if

  • You print terrain and props by the dozen
  • You paint everything you print

Skip if

  • You need flexible or tough parts

Verdict: Plain standard resin in bulk.

Best for heat

Inslogic 1kg High Temp 3D Printer Resin

Best for: Best for heat

Curing Wavelength
✓ 405nm
Resin Type
High Temp
Compatible Technology
LCD, DLP, SLA
Net Weight
1kg
Application
Thermoforming molds, invest casting
Printing Technology
Resin

View on Amazon: Inslogic 1kg High Temp 3D Printer Resin Affiliate link

Inslogic High Temp resin, 1kg grey: holds 300°C for up to 3 minutes without warping, for thermoforming molds and investment casting, and works on 365-405nm LCD, DLP and SLA printers.

Pros

  • 300°C for 3 minutes
  • Rigid under heat
  • 365-405nm band

Cons

  • Low stock
  • Costliest per kilo here

Good fit if

  • You print vacuum-forming molds
  • You need parts near a hot nozzle

Skip if

  • You print display models

Verdict: A functional resin for hot jobs.

Best budget

ANYCUBIC 500g Grey 405nm UV Resin

Best for: Best budget

Curing Wavelength
✓ 405nm
Resin Type
Standard
Compatible Technology
SLA, LCD, DLP
Net Weight
500g
Printing Technology
Resin
Features
High Precision, Fast Curing

View on Amazon: ANYCUBIC 500g Grey 405nm UV Resin Affiliate link

Read our full review

ANYCUBIC basic UV resin, 500g grey (POT016): low shrinkage, quick curing and good fluidity, compatible with all DLP and LCD printers and tuned for ANYCUBIC's own Photon models.

Pros

  • Cheapest pick here
  • Small 500g bottle for trying
  • Works with all LCD printers

Cons

  • Only 500g
  • Basic standard resin

Good fit if

  • You just bought a Photon Mono 4 and want a starter bottle
  • You test settings before buying bulk

Skip if

  • You print every day

Verdict: A small, cheap 405nm starter bottle.

Specifications side by side

Spec ELEGOO ABS-Like 3.0 3000g Resin Phrozen Aqua Hyperfine 405nm 1kg Resin ELEGOO Water Washable Resin 2.0 Grey 1kg ANYCUBIC Plant-Based Rapid Resin 2.0 Grey SUNLU 3kg Standard 3D Printer Resin Inslogic 1kg High Temp 3D Printer Resin ANYCUBIC 500g Grey 405nm UV Resin
Resin Type ABS-Like 3.0 not stated Water Washable Plant-Based Standard High Temp Standard
Curing Wavelength 405nm 405nm 405nm 405nm, 355nm-410nm 365-405nm, 395-405nm 365–405nm 405nm
Compatible Technology MSLA, DLP, LCD LCD, MSLA LCD LCD, DLP LCD, DLP, SLA LCD, DLP, SLA SLA, LCD, DLP
Net Weight 3000g 1KG 1000g 1kg 3kg 1kg 500g
Cleaning Method not stated not stated Water not stated Isopropyl alcohol or ethanol not stated not stated
Application Functional prototypes, mechanical parts not stated Tabletop models, industrial parts not stated Hand-made printing Thermoforming molds, invest casting not stated
Printing Technology Resin Resin Resin Resin Resin Resin Resin
Compatible Material ABS not stated not stated not stated not stated not stated not stated
Features High Precision Low Shrinkage Low Shrinkage High Speed, Low Odor High Precision, Low Shrinkage, Fast Curing not stated High Precision, Fast Curing
Color Grey Aqua Hyperfine Red Grey 1KG Grey 3000g Grey 1kg High Temp Resin Grey Grey
Size XL-3000g 1KG 1 Count (Pack of 1) not stated XL-3000g 1KG 500g
Surface Finish not stated Smooth not stated not stated not stated not stated not stated
Resolution not stated 12K not stated not stated not stated not stated not stated
Dimensions 9.37 × 3.86 × 3.86 inches 3.54 × 3.54 × 8.86 inches not stated 1.3 × 1.3 × 4.3 inches not stated not stated not stated
Weight not stated 1 kilograms not stated 3.53 ounces 6.61 pounds 2.2 pounds 1.1 pounds
Model AU-ABS3.0 not stated not stated not stated Fast Curing Standard 3D Printer Resin not stated POT016

Picking a resin for a 405nm printer

  1. Match the job first

    Choose ELEGOO ABS-Like 3.0 for parts that get drilled or snapped, Inslogic High Temp for heat, and SUNLU standard for painted display pieces.

  2. Check cleanup

    ELEGOO Water Washable 2.0 rinses in water; SUNLU names isopropyl alcohol or ethanol.

  3. Mind storage

    ANYCUBIC lists 15-35°C, sealed and out of sunlight.

  4. Buy small first

    ANYCUBIC's 500g bottle lets you dial in exposure before buying 3kg.

Frequently asked questions

Does 405nm resin work on every LCD printer?

Most consumer LCD printers use 405nm; ELEGOO and Phrozen list LCD/MSLA printers at that wavelength.

What wavelength range does the ANYCUBIC Plant-Based 2.0 cover?

355-410nm per ANYCUBIC.

How hot can Inslogic High Temp resin get?

300°C for up to 3 minutes without warping.

How low is ELEGOO Water Washable 2.0 viscosity?

109.40 mPa.s at 25°C.

Which resin suits a 16K printer?

Phrozen Aqua Hyperfine targets 9K, 12K and higher screens.

See also