SUNLU Easy PA Nylon Filament (Natural, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU Easy PA is a nylon for people who want tough, heat-resistant parts without the heated chamber that many nylons demand. It is a copolymer of nylon 6 and nylon 6.6 in natural color, and the striking number on the listing is the bed: 30-50°C, far below what PA usually needs, with a 250-270°C nozzle and 60-150mm/s print speed. SUNLU rates heat resistance at up to 121°C and suggests annealing at 90-130°C with slow cooling for more strength and heat resistance. It is pitched at living hinges, functional household and industrial parts, with claims of no cracking and no warping that are not backed by test figures. The catch is moisture: SUNLU asks for drying at 70°C for 48 hours and storing the spool back in its foil bag. Our assessment is based on SUNLU's listing, not shop-floor testing.
What stands out
- PA6/PA66 copolymer, natural, 1kg
- 250-270°C nozzle, 30-50°C bed
- 60-150mm/s
- Heat resistance up to 121°C
- Dry 70°C for 48h; anneal 90-130°C
Who it fits
Good fit for
Owners of printers with an all-metal hotend reaching 270°C who want strong, heat-tolerant functional parts like hinges, clips and brackets.
Who should skip it
Printers limited to around 240°C, and anyone without a filament dryer, since nylon pulls in moisture fast.
Verdict: An approachable nylon with real settings, if you can dry it properly.
SUNLU Easy PA settings in plain terms
250-270°C nozzle
Needs an all-metal hotend; PTFE-lined hotends are not suitable.
30-50°C bed
Low for nylon; most open-frame printers can manage it.
60-150mm/s
Moderate speeds, not a high-speed formula.
121°C heat resistance
Holds up near engines, heaters and hot cars.
70°C for 48h drying
Plan a long dryer session before printing.
What makes Easy PA different
Mixing nylon 6 with nylon 6.6 lowers the warping tendency, which is why SUNLU can list a 30-50°C bed. SUNLU also claims UV resistance with no brittleness or fading, abrasion and friction resistance, and drop toughness. A larger spool inner diameter is meant to ease feeding. Annealing at 90-130°C, followed by slow cooling, is offered as a way to push heat resistance and strength further.
Printing and storing SUNLU Easy PA
Dry the spool at 70°C for 48 hours before the first print, then feed it from a dry box or reseal it in the aluminum foil bag between jobs. Use glue or a textured plate, since nylon grips some surfaces too well and others poorly; the listing gives no plate advice. Expect parts to need conditioning: nylon picks up moisture over time and becomes tougher but slightly softer.
Before buying SUNLU Easy PA Natural
Checks.
Check before you buy
- Your hotend reaches 270°C for SUNLU Easy PA
- You own a dryer that holds 70°C for SUNLU Easy PA
- Natural (off-white) suits your Easy PA parts
The product at a glance
SUNLU Easy PA 1.75mm Nylon Filament
Best for: Heat-resistant functional parts
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 150mm/s
- Printing Technology
- FDM
- Compatible Material
- Nylon
- Weight
- 2.2 pounds
View on Amazon: SUNLU Easy PA 1.75mm Nylon Filament Affiliate link
SUNLU Easy PA natural 1kg: PA6/PA66 copolymer, 250-270°C, bed 30-50°C, 60-150mm/s, 121°C heat resistance, dry 70°C 48h, annealable at 90-130°C.
Pros
- Low 30-50°C bed for nylon
- Full settings plus annealing guide
- 121°C heat resistance
Cons
- Needs 270°C all-metal hotend
- 48-hour drying
- No-warp claims not measured
Good fit if
- You want tough nylon parts on an open printer
Skip if
- Your hotend cannot reach the 250°C Easy PA minimum
Verdict: The easiest nylon start for printers with a hot all-metal hotend.
Specifications side by side
| Spec | SUNLU Easy PA 1.75mm Nylon Filament |
|---|---|
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 150mm/s |
| Printing Technology | FDM |
| Compatible Material | Nylon |
| Weight | 2.2 pounds |
| Size | 1KG |
| Color | 1kg Easy Pa Natural |
| Model | Easy PA Engineering Filament |
Frequently asked questions
What is SUNLU Easy PA made of?
A copolymer of nylon 6 and nylon 6.6.
What temperatures does SUNLU list for Easy PA?
250-270°C nozzle and 30-50°C bed, at 60-150mm/s.
How heat resistant is SUNLU Easy PA?
Up to 121°C according to SUNLU.
Does SUNLU Easy PA need drying?
Yes, 70°C for 48 hours per the listing.
Can SUNLU Easy PA be annealed?
SUNLU suggests heating to 90-130°C and cooling slowly to improve heat resistance and strength.
Featured in
See also
- sunlu silk pla 4kg gold silver blue green review
- sunlu pa6 gf25 glass fiber nylon filament review
- sunlu fast curing standard resin clear 1kg review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- nemco 1 4 inch easy tomato review
- voigtlander voigtlander nokton 75mm f 1 5 review
