Phrozen EL400 Elastic Resin Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
EL400 is Phrozen's elastomer in the Engineering Series, and unlike most flexible resins it comes with real numbers. The 1kg listing quotes 391% elongation at break, a 50-55 Bayshore rebound rate, a tear strength of 22 kN/m and more than 60,000 cycles in a Ross bending fatigue test at 23°C. Phrozen pitches it for parts that bend over and over, naming bicycle seats and shoe cushions, and describes the feel as rubber-like elasticity with some hardness. It cures at 405nm on DLP and LCD printers and ships in a leakproof bottle. What the page leaves out: a Shore hardness value, exposure settings and bottle shelf life. The stock level is low, and the price is well above general-purpose resins. Everything here comes from Phrozen's listing.
What stands out
- 391% elongation at break
- 22 kN/m tear strength
- 60,000+ flex cycles in a Ross test
Who it fits
Good fit for
Designers prototyping cushions, grips, gaskets, seals and wearable parts that must stretch and spring back many times, who want published elastomer figures to design around.
Who should skip it
Anyone printing rigid models or minis, buyers who need a stated Shore hardness to match a part, and hobbyists who only want a cheap soft resin for occasional bendy prints.
Verdict: A data-backed elastomer resin for repeated-flex prototypes, priced like an engineering material.
Published properties
Elongation at break 391%
Stretches to nearly five times its length before failing.
Bayshore rebound 50-55
Springs back with moderate bounce, like a firm cushion.
Tear strength 22 kN/m
Resists ripping at thin edges and holes.
Ross flex, 60,000+ cycles at 23°C
Survives repeated bending without cracking.
Data and packaging
Phrozen backs the claims with named tests, which is rare on resin listings, though it gives no hardness, viscosity or recommended exposure. The bottle is leakproof and packed securely, and the page points to Phrozen's support team for help with settings.
Printing flexible parts
Elastic resins need slower lifts and good support placement, as soft layers can peel or sag; plan for a few tuning prints. Wash and post-cure carefully, since flexible parts deform while handled wet. Hollow, lattice and thin-wall designs show off the rebound best.
Before buying
Checks.
Check before you buy
- Your part must flex repeatedly, not just once
- You can tune exposure without a listed profile
- You do not need a Shore value to spec the part
- The premium over standard resin is justified
The product at a glance
Phrozen Engineering Series Elastic Resin 1kg
Best for: Repeated-flex prototypes
- Resin Type
- Elastomer
- Curing Wavelength
- 405nm
- Compatible Technology
- LCD, DLP, SLA
- Net Weight
- 1KG
- Application
- Bicycle seats, shoe cushions
- Printing Technology
- Resin
View on Amazon: Phrozen Engineering Series Elastic Resin 1kg Affiliate link
Phrozen EL400 elastomer resin, 1kg: 391% elongation, 50-55 Bayshore rebound, 22 kN/m tear strength, 60,000+ Ross flex cycles, 405nm DLP/LCD; low stock.
Pros
- Real elastomer data
- Rubber-like rebound
- Tear resistant
Cons
- No Shore hardness or settings
- Premium price
Good fit if
- You prototype cushions or grips
- You design to published numbers
Skip if
- You print rigid minis
- You want a cheap bendy resin
Verdict: An engineering elastomer resin with test data.
Specifications side by side
| Spec | Phrozen Engineering Series Elastic Resin 1kg |
|---|---|
| Resin Type | Elastomer |
| Curing Wavelength | 405nm |
| Compatible Technology | LCD, DLP, SLA |
| Net Weight | 1KG |
| Application | Bicycle seats, shoe cushions |
| Printing Technology | Resin |
| Features | Low Shrinkage, Non-Brittle |
| Size | 1KG |
| Dimensions | 3.54 × 3.54 × 8.86 inches |
| Weight | 1 kilograms |
| Color | EL400 |
Frequently asked questions
How stretchy is Phrozen EL400 resin?
Phrozen lists 391% elongation at break.
What uses does Phrozen suggest for EL400?
Parts under repeated bending, such as bicycle seats and shoe cushions.
Does the EL400 listing give a Shore hardness?
No. It gives rebound, tear strength and flex-cycle data, but no Shore figure.
Which printers can cure Phrozen EL400?
405nm DLP and LCD resin printers.
Featured in
See also
- monoprice mini delta v2 3d printer review
- raise3d 101017001 pro2 plus 3d printer review
- anycubic kobra s1 max 3d printer review
- phrozen aqua hyperfine photopolymer resin review
- phrozen water washable rapid resin review
- Phrozen RPG Rapid Resin (Smoke, 1kg) Review
- best phrozen 3d printers
- unxuey 50pcs 3d printer heatsink review
