As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SIMAX3D Dual Drive Geared Extruder 2-Pack Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The SIMAX3D dual drive geared extruder 2-pack puts two black 3:1 Bowden extruders (model TTEXTRBGM01) in one box, and the case for it is simple: if you run two Bowden printers, or want a spare on the shelf, a pair costs less effort than ordering twice. Each unit grips the filament from both sides with a 3:1 internal gear ratio, and SIMAX3D suggests starting at 385-415 E-steps, then calibrating for your printer. The listing names Creality Ender 3 (the title adds Ender 3 V2), Anycubic Mega and Prusa i3 series printers, and says this version is for remote (Bowden) drive, so it is not a direct drive conversion. Tension is set with a hand-twist screw; SIMAX3D warns that overtightening jams the filament. The page gives no motor, mount drawing or stepper bracket, which a single-unit SIMAX3D BMG listing also leaves out. We worked from SIMAX3D's bullets and specs only.

What stands out

  • Two extruders in the box
  • 3:1 internal gear ratio
  • E-steps 385-415 suggested
  • Hand-twist tension screw

Who it fits

Good fit for

Owners of two Ender 3, Anycubic Mega or Prusa i3 style Bowden printers, or a print farm that wants a spare extruder ready to swap in.

Who should skip it

Anyone after a direct drive upgrade, or owners of printers not named on the listing who cannot check the mount pattern first.

Verdict: A practical two-pack of geared Bowden extruders for common printers; plan to calibrate E-steps after fitting.

SIMAX3D 2-pack extruder specs

2 x dual drive extruder

One for now, one for a second printer or as a spare.

3:1 gear ratio

More push per motor step than a stock single gear feeder.

E-steps 385-415

A starting range; SIMAX3D says set it for your printer.

Remote (Bowden) drive

Mounts on the frame, not on the hotend carriage.

9.95 ounces shipping weight

For both units together.

How the SIMAX3D dual gear design works

Two gears pinch the filament from opposite sides, and the 3:1 internal reduction lets the stepper turn more for each millimetre fed. That combination is what usually cures clicking or grinding on stock single gear feeders. SIMAX3D's tension knob sets the grip by hand; the listing warns that too much pressure makes the filament snag in the Bowden path.

Fitting a SIMAX3D extruder

Swap the stock feeder for one unit, route the Bowden tube, then set the firmware's E-steps to a value in the 385-415 range and run an extrusion test to fine-tune it. Load filament after backing off the hand screw, then tighten just enough that it feeds without slipping. Keep the second unit as a drop-in spare or fit it to another printer of the same type.

Before buying the SIMAX3D 2-pack

Checks.

Check before you buy

  • Your printer uses a Bowden setup for the SIMAX3D extruder
  • Your machine is an Ender 3, Anycubic Mega or Prusa i3 style
  • You can edit E-steps after fitting the SIMAX3D unit
  • You have a use for the second extruder in the pack

The product at a glance

SIMAX3D Dual Drive Extruder 2-Pack

Best for: Two Bowden printers or a spare

Extruder Type
Dual Drive Extruder
Color
Black
Weight
9.95 ounces

View on Amazon: SIMAX3D Dual Drive Extruder 2-Pack Affiliate link

SIMAX3D dual drive extruder 2-pack (TTEXTRBGM01): two 3:1 dual gear Bowden feeders for Ender 3, Anycubic Mega and Prusa i3 style printers, E-steps 385-415.

Pros

  • Two units in one box
  • 3:1 reduction with dual gears
  • Clear E-step starting range

Cons

  • No motor or bracket included
  • Bowden only, not direct drive
  • No mount drawing on the page

Good fit if

  • You run two Bowden printers or want a spare feeder

Skip if

  • You want to convert a printer to direct drive with the SIMAX3D pack

Verdict: A sensible pair of geared Bowden feeders.

Specifications side by side

Spec SIMAX3D Dual Drive Extruder 2-Pack
Extruder Type Dual Drive Extruder
Color Black
Weight 9.95 ounces
Size 2PCS
Model TTEXTRBGM01

Frequently asked questions

How many extruders are in the SIMAX3D 2-pack?

Two dual drive extruders, both black.

What E-steps does SIMAX3D suggest for this 2-pack?

385-415 as a starting point, then set it for your own printer.

Is the SIMAX3D 2-pack a direct drive kit?

No. SIMAX3D says this version is for remote (Bowden) drive.

Which printers does the SIMAX3D 2-pack fit?

The listing names Creality Ender 3 (and Ender 3 V2 in the title), Anycubic Mega and Prusa i3 series.

See also