EiiJugaloo Saturn 4 Ultra 16K Dust Cover (Silver) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
EiiJugaloo's silver dust cover is a 600D nylon sleeve sized for the ELEGOO Saturn 4 Ultra 16K, and for a resin printer that sits idle between jobs it is a cheap way to keep dust off the lid and the build area. The main reason to consider it is the size information: 13.8 x 13.8 x 23.2 inches (35 x 35 x 59cm), stated clearly, so you can check it against any printer of similar size, which EiiJugaloo invites by calling it a universal case. The cover drops over the machine by a handle on top, is open at the bottom for air circulation, can be washed by hand or in a machine, and folds away when not in use. It is the silver colorway of the same cover sold in black; the silver listing ships lighter at 4.8 ounces against 6.4 for the black one, which may mean a thinner coating, but the page does not say. One bullet calls it an air fryer cover, a copy-paste slip. Our notes are drawn from EiiJugaloo's listing alone.
What stands out
- 35 x 35 x 59cm (13.8 x 13.8 x 23.2in)
- 600D nylon, waterproof and scratch resistant
- Top handle, open bottom
- Machine or hand washable
Who it fits
Good fit for
Saturn 4 Ultra 16K owners, or owners of any printer or device that fits a 35 x 35 x 59cm footprint, who want a light silver cover between prints.
Who should skip it
Anyone hoping it works as an enclosure, a fume barrier or a heat box; it is a dust cover with an open base.
Verdict: A simple, clearly sized silver dust cover; check your printer's dimensions before you order.
EiiJugaloo silver cover specs
13.8 x 13.8 x 23.2in
Height of 59cm covers a tall resin printer with its lid on.
600D nylon
Heavy weave that sheds water and resists scratches.
Open bottom
Air can circulate, so moisture does not sit under the cover.
4.8 ounces
The silver version's listed shipping weight.
Washable
Wipe it, hand-wash it or put it in the machine.
What the silver EiiJugaloo cover does and does not do
It keeps dust, hair and splashes off the printer when you are not using it, which matters on a resin machine because particles on the vat lid or screen show up in the next print. It is not sealed: the open base is there on purpose, so it will not hold in resin smell or keep UV light out the way a dedicated enclosure would. The listing says only the cover is sold.
Using the cover day to day
Lift it on by the handle once a print is finished and the machine has stopped, and slide it off before the next job. Wipe resin drips with a damp cloth, or wash the cover when it gets dusty, then let it dry before putting it back. When the printer is in use, it folds flat into a drawer.
Before buying the EiiJugaloo silver cover
Checks.
Check before you buy
- Your printer fits under 35 x 35 x 59cm with the EiiJugaloo silver cover
- You want a dust cover, not a resin enclosure
- Silver suits your room better than the black EiiJugaloo cover
The product at a glance
EiiJugaloo 3D Printer Cover Heavy Duty
Best for: Saturn 4 Ultra 16K dust cover
- Primary Material
- 600D nylon
- Dimensions
- 35x35x59cm
- Printing Technology
- Resin
- Resolution
- 16K
- Weight
- 4.8 ounces
View on Amazon: EiiJugaloo 3D Printer Cover Heavy Duty Affiliate link
EiiJugaloo silver dust cover, 600D nylon, 35x35x59cm for the Saturn 4 Ultra 16K; top handle, open base, washable, folds flat.
Pros
- Clear dimensions on the page
- Washable 600D nylon
- Light and foldable
Cons
- Not an enclosure or fume barrier
- Bullet calls it an air fryer cover
- Only one size offered
Good fit if
- You own a Saturn 4 Ultra 16K and want a silver cover
Skip if
- Your printer is wider than 35cm under the EiiJugaloo silver cover
Verdict: A clearly sized silver cover for idle printers.
Specifications side by side
| Spec | EiiJugaloo 3D Printer Cover Heavy Duty |
|---|---|
| Primary Material | 600D nylon |
| Dimensions | 35x35x59cm |
| Printing Technology | Resin |
| Compatible Material | Nylon |
| Resolution | 16K |
| Weight | 4.8 ounces |
| Color | silver |
| Model | 3D Printer Cover |
Frequently asked questions
What size is the EiiJugaloo silver printer cover?
13.8 x 13.8 x 23.2 inches, or 35 x 35 x 59cm.
Which printer is the EiiJugaloo silver cover made for?
The ELEGOO Saturn 4 Ultra 16K; EiiJugaloo says other equipment of the same size also fits, so measure first.
Can you wash the EiiJugaloo silver cover?
Yes, the listing says you can wipe it, hand-wash it or machine-wash it.
Does the EiiJugaloo silver cover block resin fumes?
No. It has an open bottom for airflow and is meant for dust and splashes, not fumes.
See also
- greensen k2 plus xy axis timing belt review
- nova3d water washable tough resin white 1kg review
- anycubic photon mono 4 ultra review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- qulimetal heavy duty grill cover review
- eiijugaloo robotic pool cleaner cover review
