Polymaker ASA Filament Bundle (Black x2, 2kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Polymaker's ASA black two-roll bundle gives you 2kg of a UV and weather resistant material, and it is our pick for makers who want a first serious batch of outdoor parts without committing to the four-roll box. The main reason is the data: Polymaker lists a heat deflection temperature of up to 103°C at 0.45 MPa (100°C at 1.8 MPa), a Vicat softening point of 105°C, and full settings of 240-260°C at the nozzle, 75-95°C on the bed and 50-200mm/s. ASA behaves like ABS with better sun resistance, so the same caveat applies: Polymaker says it still needs an enclosed printer and good ventilation or filtration, even if many find the smell milder than ABS. The set ships as two 1.75mm black spools; other launch sets pair black with white or grey, or white with red, and a black x4 box covers heavy use. All of this comes from Polymaker's own page and published figures, not from prints of our own.
What stands out
- HDT 103°C (0.45 MPa), Vicat 105°C
- 240-260°C nozzle, 75-95°C bed, 50-200mm/s
- UV and weather resistant ASA
- Two 1kg black rolls, 1.75mm
Who it fits
Good fit for
Owners of an enclosed printer who make brackets, garden fixtures, car accessories or housings that sit in sun or a hot garage, and want two matching rolls for a project.
Who should skip it
Anyone printing on an open-frame machine in a living space, or who only needs indoor decorative parts that PLA or PETG handles fine.
Verdict: A well-documented ASA in a sensible two-roll size for a first outdoor project; the enclosure is not optional.
Polymaker ASA two-roll set: the numbers
HDT 103°C at 0.45 MPa / 100°C at 1.8 MPa
Parts keep their shape in hot cars and garages, well beyond PLA.
Vicat 105°C
The point where the plastic starts to soften under load.
Nozzle 240-260°C
Within reach of most modern hotends; check older PTFE-lined ones.
Bed 75-95°C
A heated bed and an enclosure help stop corners lifting.
Dry at 70°C for 7 hours
Polymaker's drying advice when the spool has picked up moisture.
Why ASA for outdoor parts
Polymaker positions this ASA as ABS-like toughness plus UV and weather resistance, which is the reason to pick it over PETG for things left outdoors: mounts, plant fixtures, vehicle trim and enclosures. The listing also stresses stiffness and dimensional stability for parts that must fit precisely. Black hides sun fading better than light colors, though the page does not rate fading itself.
Printing the two black rolls
Run it in an enclosure with a vent or filter, as Polymaker asks. Start in the middle of 240-260°C, set the bed between 75°C and 95°C, and stay inside the 50-200mm/s window; larger flat parts benefit from the slower end. If the spool has been open for a while, dry it at 70°C for 7 hours before a long job. Two identical rolls make it easy to finish a multi-part project in one color batch.
Before buying the Polymaker ASA 2kg set
Checks.
Check before you buy
- Your printer has an enclosure for Polymaker ASA
- Your hotend reaches 260°C for this ASA bundle
- You can vent or filter fumes from the ASA prints
- You want the black x2 set, not black+white or the x4 box
The product at a glance
Polymaker ASA 2KG Black Bundle
Best for: Outdoor and heat-exposed parts
- Material Type
- ASA
- Filament Diameter
- 1.75mm
- Net Weight
- 2kg
- Max Print Speed
- 200mm/s
- Application
- Functional Parts
- Weight
- 4.41 pounds
View on Amazon: Polymaker ASA 2KG Black Bundle Affiliate link
Polymaker ASA black, two 1kg rolls: UV and weather resistant, HDT up to 103°C, full settings (240-260°C, 75-95°C bed, 50-200mm/s) and drying advice on the page.
Pros
- Heat figures published (HDT, Vicat)
- Complete print and drying settings
- Two matching rolls for one project
Cons
- Needs an enclosure and ventilation
- Hotter than PLA or PETG to print
- Only black in this set
Good fit if
- You print outdoor mounts or car parts on an enclosed printer
Skip if
- Your printer is open-frame and sits in a living room
Verdict: Two rolls of a well-documented outdoor ASA.
Specifications side by side
| Spec | Polymaker ASA 2KG Black Bundle |
|---|---|
| Material Type | ASA |
| Filament Diameter | 1.75mm |
| Net Weight | 2kg |
| Max Print Speed | 200mm/s |
| Compatible Material | ASA |
| Size | 2KG |
| Application | Functional Parts |
| Weight | 4.41 pounds |
| Color | 1kg Black *2 |
Frequently asked questions
What settings does Polymaker list for this ASA bundle?
Nozzle 240-260°C, bed 75-95°C, and 50-200mm/s.
How heat resistant is Polymaker ASA black?
Polymaker gives a heat deflection temperature of up to 103°C at 0.45 MPa and a Vicat softening point of 105°C.
Does Polymaker ASA need an enclosed printer?
Yes. Polymaker says it still requires an enclosure and good ventilation or filtration, although it is often seen as less smelly than ABS.
How many rolls come in the Polymaker ASA 2kg black set?
Two 1kg black rolls of 1.75mm filament.
See also
- simax3d dual drive geared extruder 2 pack review
- aorita3d nfep film 290x210mm 5 pack review
- eiijugaloo saturn 4 ultra silver dust cover review
- polymaker petg filament 1 75mm review
- polymaker asa filament 1 75mm white review
- Polymaker Fiberon Carbon Fiber PETG Review: Who It Fits and Who Should Skip It
- Polymaker 1.75mm ABS Filament Review (2026): A Spec-Based Look
- Polymaker TPU 95A Flexible Filament (0.75kg) Review: Specs, Pros and Cons
- audiosavings bundle review
- audiosavings bundle review
