QIDI Max4 Combo Review: Who It Fits and Who Should Skip It (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The QIDI Max4 Combo is aimed squarely at people printing big parts in demanding materials, and the listing makes the fit easy to judge. Its 390×390×340mm volume is 55% larger than the MAX3, enough for molds, enclosures and prototypes in one piece. A 65°C actively heated chamber, a 370°C hardened steel nozzle and 40mm³/s flow open up ABS-CF, PC, PPS-CF and carbon-fiber nylon. Closed-loop motors on X and Y push it to 800mm/s at 30,000mm/s², and a 2mm Z lead screw with an anti-backlash nut and dual Z screws keep layers straight. An AI camera pauses on spaghetti failures. The page does not spell out what the Combo adds; its multi-color bullet describes connecting a QIDI BOX for up to 16 colors. Two practical limits: QIDI's own note says the Polar Cooler is not included, and the spec field lists 120 lb with a 28×28×30 in footprint. Details are taken from QIDI's listing.
What stands out
- 390×390×340mm volume
- 65°C active chamber, 370°C hardened nozzle
- 800mm/s on closed-loop X/Y motors
- AI camera pauses on failures
Who it fits
Good fit for
Engineers, prop makers and small studios printing large parts in PC, ABS-CF, PPS-CF or nylon-CF who have floor space for a heavy machine.
Who should skip it
Anyone with a desk-sized space, anyone who cannot lift or place a 120 lb printer, or PLA-only hobbyists who will never use the chamber.
Verdict: A serious large-format engineering printer; fit it only if you have the room and the materials to justify it.
Max4 Combo specs that decide the fit
390×390×340mm
Large molds and housings in one print.
65°C heated chamber
Steady air for PC, ABS-CF and PPS-CF.
370°C hardened nozzle, 40mm³/s
Abrasive fiber blends at speed.
Closed-loop X/Y, 800mm/s
Motors correct missed steps on long jobs.
120 lb, 28×28×30 in
Floor stand or heavy bench, two people to move.
Large frame, engineering focus
The full-surface silicone bed heater spreads heat evenly across the big plate, which helps first layers on large ABS or PC parts. The Z axis uses a fine 2mm lead screw with an anti-backlash nut to reduce vertical gaps. The Polar Cooler, QIDI's extra cooling system, is mentioned throughout but sold separately.
Daily use on a large heated printer
Expect long preheats when the chamber needs to reach 65°C for PC or PPS-CF. The AI camera pauses on spaghetti so an overnight job does not waste a full spool. For color work, a QIDI BOX connects for 16 colors with filament level monitoring and runout pause.
Before ordering the QIDI Max4 Combo
Space and budget checks.
Check before you buy
- Your floor or bench can carry the 120 lb Max4 Combo
- You print PC, ABS-CF or nylon-CF often enough to need a Max4
- You will add the Polar Cooler to the Max4 if you need it
The product at a glance
QIDI Max4 Combo Large 3D Printer
Best for: Large PC and fiber-filled parts
- Build Volume
- 390×390×340mm
- Print Speed
- 800mm/s
- Multicolor Capacity
- 16-color
- Leveling Type
- Auto-leveling
- Extruder Type
- Hardened steel nozzle
- Chamber Heating
- 65℃
View on Amazon: QIDI Max4 Combo Large 3D Printer Affiliate link
QIDI Max4 Combo: a 390×390×340mm engineering printer with a 65°C chamber, 370°C hardened nozzle and closed-loop 800mm/s motion.
Pros
- Very large build volume
- Heated chamber for PC and CF blends
- Closed-loop X/Y motors
Cons
- 120 lb, large footprint
- Polar Cooler sold separately
- Combo contents not spelled out
Good fit if
- You print big engineering parts
Skip if
- Your space is a desk
Verdict: Worth it for large high-temperature parts; overkill for desk PLA.
Specifications side by side
| Spec | QIDI Max4 Combo Large 3D Printer |
|---|---|
| Build Volume | 390×390×340mm |
| Print Speed | 800mm/s |
| Multicolor Capacity | 16-color |
| Leveling Type | Auto-leveling |
| Extruder Type | Hardened steel nozzle |
| Chamber Heating | 65℃ |
| Leveling | Auto Leveling |
| Features | High Speed, Built-in Camera, Heated Chamber |
| Color | Grey |
| Dimensions | 28 × 28 × 30 inches |
| Weight | 120 pounds |
| Size | MAX4 Combo |
Frequently asked questions
How large is the QIDI Max4 build volume?
390×390×340mm, 55% larger than the MAX3 per QIDI.
Does the Max4 Combo include the Polar Cooler?
No, QIDI notes it must be bought separately.
What materials can the QIDI Max4 print?
PLA and ABS up to carbon-fiber nylon, ABS-CF, PC and PPS-CF.
How heavy is the QIDI Max4 Combo?
120 lb on the spec field.
Featured in
See also
- entina tina2 plus 100mm build volume review
- heygears reflex rs turbo amber screen review
- aoseed x maker joy AI plus kids kit review
- r qidi technology qidi max4 3d printer review
- r qidi technology qidi q2 3d printer review
- R QIDI Technology QIDI Plus5 Heated Chamber 3D Printer Review: Who It Fits and Who Should Skip It
- QIDI Plus4 Heated Chamber 3D Printer Review: Who It Fits and Who Should Skip It
- QIDI Q2 Combo Review (2026): Multi-Color with 65°C Chamber
- r qidi technology qidi q2 combo 3d printer review
- easycargo 30pcs 3d printer heatsink review
