As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

QIDI Plus4 Heated Chamber 3D Printer Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

What sets the QIDI Plus4 apart is active chamber heating: a 400W heater with air circulation and two layers of insulation holds the enclosure at up to 65°C, which QIDI says cuts warping and cracking with high-temperature filaments. An 80W hotend with a bimetal throat reaches 370°C for PPS-CF, PPA-CF/GF, PC, PA, ABS and ASA. Add a 305 x 305 x 280mm CoreXY build, 600mm/s and a camera, and it fits engineering users who print large functional parts. We worked from the listing, not hands-on testing.

What stands out

  • Active 400W chamber heating to 65°C
  • 370°C hotend for PPS-CF and PPA-CF/GF
  • 305 x 305 x 280mm build volume
  • HD camera with time-lapse, app and slicer control
  • Works with the QIDI BOX for multi-color

Who it fits

Good fit for

Engineers and makers printing nylon, PC and carbon-fiber blends at size, where a heated chamber is the difference between a flat part and a cracked one.

Who should skip it

If you print PLA and PETG only, a heated chamber is cost and weight you will not use: the Plus4 weighs 59.5 lb. Low stock at our check could also slow delivery. For multi-color, budget for the separate QIDI BOX.

Verdict: A strong pick for high-temperature engineering filaments at a large size.

QIDI Plus4 specs, translated

65°C active chamber, 400W

Keeps the air warm and even so ABS, PC and nylon warp less.

370°C, 80W hotend

Melts PPS-CF and PPA blends; QIDI says the bimetal throat resists clogs and wear.

305 × 305 × 280mm

Room for several parts at once or one large piece.

600mm/s CoreXY

Carried over from the X-Plus3 design.

6mm aluminum bed, dual Z motors

Stiffer, flatter platform for accuracy.

Build

The Plus4 measures about 19.3 x 20.1 x 22.2 inches and weighs 59.5 lb. QIDI thickened the hot bed to 6mm aluminum, uses two independent Z motors, and upgraded the linear shafts and lead screws to 10mm. A filament cutter is built in for future multi-color use, and wrap and break detection watch the filament path.

Running jobs

QIDI quotes 10 minutes from unboxing to printing. Remote printing and progress tracking work through the QIDI app or QIDI Studio, and the HD camera records time-lapses. For multi-color, the printer pairs with the QIDI BOX feeder; the listing still describes the BOX as launching in early 2025, so that line is dated.

Points to weigh before buying the QIDI Plus4

It is a serious machine for serious materials.

Check before you buy

  • You print PC, PA, ABS or CF/GF blends
  • You have floor or bench space for a 59.5 lb printer
  • Multi-color would need the extra QIDI BOX
  • Low stock may delay shipping

The product at a glance

QIDI Plus4 Heated Chamber 3D Printer

Best for: High-temperature filaments

Build Volume
305x305x280mm
Print Speed
600mm/s
Leveling Type
Fully auto leveling
Extruder Type
Multi-metal integrated throat nozzle
Chamber Heating
65℃
Features
High Speed, Heated Chamber

View on Amazon: QIDI Plus4 Heated Chamber 3D Printer Affiliate link

QIDI Plus4 CoreXY with 400W active chamber heating to 65°C, a 370°C 80W hotend for PPS-CF and PA, 305 x 305 x 280mm volume, 600mm/s, HD camera and QIDI BOX support.

Pros

  • Real heated chamber
  • 370°C for engineering blends
  • Large volume

Cons

  • Heavy at 59.5 lb
  • Multi-color needs the QIDI BOX

Good fit if

  • You print nylon, PC or CF parts that warp in a cold box

Skip if

  • You only print PLA and PETG

Verdict: A heated-chamber workhorse for engineering filaments.

Specifications side by side

Spec QIDI Plus4 Heated Chamber 3D Printer
Build Volume 305x305x280mm
Print Speed 600mm/s
Leveling Type Fully auto leveling
Extruder Type Multi-metal integrated throat nozzle
Chamber Heating 65℃
Leveling Auto Leveling
Features High Speed, Heated Chamber
Dimensions 19.3 × 20.1 × 22.2 inches
Weight 59.5 pounds
Size 01 PLUS4
Color silver
Model AU-PLUS4

Frequently asked questions

How hot does the QIDI Plus4 chamber get?

Up to 65°C, using a 400W active heater with air circulation.

What filaments can the QIDI Plus4 print?

QIDI lists PPS-CF, PPA-CF/GF, ABS, ASA, PC, PA and PET, with a 370°C nozzle.

Does the QIDI Plus4 print in multiple colors?

With the separate QIDI BOX feeder; the printer has the cutter built in.

How big is the QIDI Plus4 build volume?

305 x 305 x 280mm, about 12 x 12 x 11 inches.

Can I monitor the QIDI Plus4 remotely?

Yes, through its HD camera and the QIDI app or QIDI Studio.

See also