Entina Tina2 Plus Review: What Fits in a 100mm Build Volume (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The deciding number on this Entina listing (titled "MINI" and "TIAN2PLUS", the bullets call it TINA2 PLUS) is 100×105×100mm. That is the build volume, and it settles who the printer is for: keychains, game pieces, small figures, cable clips and classroom demos fit; a phone stand fits if laid flat; a helmet or vase does not. Inside that small cube the hardware is better than the price class suggests. The nozzle reaches 245°C and the bed 80°C, so Entina lists PETG, TPU, wood-fill and PLA+ besides PLA. Speed is up to 250mm/s with a claimed ±0.1mm precision, 9-point auto leveling and a dual Z axis keep layers even, and parts come off a PEI plate. A runout sensor, a quiet mainboard and Wi-Fi control through the Polypoint Cloud app round it out, with WiBuilder, Cura and other slicers supported. The body is only 200×200×290mm. All of this comes from Entina's own listing; it gives no weight.
What stands out
- 100×105×100mm build volume
- 245°C nozzle, 80°C bed: PETG and TPU listed
- 9-point auto leveling, dual Z
- PEI plate, runout sensor, Wi-Fi app
Who it fits
Good fit for
Students, classrooms and hobbyists who print small parts and want PETG or TPU options on a desk-size machine.
Who should skip it
Anyone whose projects exceed about 10cm in any direction.
Verdict: A capable tiny printer as long as your models fit a 100mm cube.
Tina2 Plus specs by what they allow
100×105×100mm
Small figures, clips, keychains; nothing helmet-size.
245°C nozzle
PLA, PLA+, PETG, wood-fill and TPU on the list.
80°C heated bed
Helps PETG stick without warping.
9-point leveling, dual Z
Even first layers on a small plate.
200×200×290mm body
Fits a bookshelf or a classroom desk.
A small frame with real features
Most toy-class minis skip the heated bed or PEI; this one has both, which is why PETG makes the list. The dual Z axis reduces wobble on a tall, narrow gantry. Entina says the silent mainboard and adjustable fan keep noise low for bedrooms and libraries, though no decibel figure is given.
Printing small on the Tina2 Plus
Start with the pre-sliced models from the starter kit, then move to Cura or WiBuilder. Before printing a downloaded model, scale it to fit 100mm; the slicer will warn if it does not. For TPU, slow the speed well below 250mm/s and keep the path short.
Before buying the Entina Tina2 Plus
Size checks first.
Check before you buy
- Your Tina2 Plus projects fit inside 100×105×100mm
- You want PETG or TPU on a small Tina2 Plus
- Wi-Fi or TF card printing suits your Tina2 Plus setup
The product at a glance
Entina Mini Compact 3D Printer
Best for: Small parts in PLA or PETG
- Build Volume
- 100×105×100 mm
- Print Speed
- up to 250 mm/s
- Leveling Type
- 9-point intelligent auto leveling
- Features
- Open Source, Wi-Fi, Fully Assembled
- Target Audience
- Beginners
- Color
- Blue
View on Amazon: Entina Mini Compact 3D Printer Affiliate link
Entina Tina2 Plus (blue): a 100mm-cube mini printer with a 245°C nozzle, 80°C bed and PEI plate, listed for PLA, PETG, TPU and wood-fill.
Pros
- Heated bed and PEI on a mini
- Wide filament list for its size
- Desk-size 200mm body
Cons
- Only 100×105×100mm to print in
- No weight or noise figure listed
- Listing title misspells the model
Good fit if
- Your parts are all small
Skip if
- You print anything over 10cm
Verdict: A well-equipped mini printer for small parts.
Specifications side by side
| Spec | Entina Mini Compact 3D Printer |
|---|---|
| Build Volume | 100×105×100 mm |
| Print Speed | up to 250 mm/s |
| Leveling Type | 9-point intelligent auto leveling |
| Leveling | Auto Leveling |
| Features | Open Source, Wi-Fi, Fully Assembled |
| Target Audience | Beginners |
| Color | Blue |
| Build Plate Material | PEI |
| Dimensions | 8.6 × 8.6 × 12.8 inches |
Frequently asked questions
What is the Entina Tina2 Plus build volume?
100×105×100mm.
Can the Tina2 Plus print PETG?
Yes, Entina lists PETG with a 245°C nozzle and 80°C bed.
Does the Tina2 Plus have auto leveling?
Yes, 9-point one-touch leveling.
Which app controls the Entina Tina2 Plus?
Polypoint Cloud, over Wi-Fi.
