QIDI Q2 Combo Review (2026): Multi-Color with 65°C Chamber
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The QIDI Q2 Combo pairs the enclosed Q2 printer with the QIDI BOX, and it stands out because its multicolor setup works with engineering filaments, not only PLA. The printer has a 65°C actively heated chamber and a 370°C nozzle for ABS, PA, PC and carbon- or glass-fiber blends, while the BOX dries spools at 65°C during the print and feeds them through a hardened steel dual-gear extruder, so fiber-filled filament does not wear it down. QIDI says the system scales to 16 colors; the listing does not state how many spools one BOX holds, so that figure likely means several BOX units. The build volume is 270×270×256mm, the frame is full-metal CoreXY on linear rails at up to 600mm/s, and the nozzle doubles as the leveling sensor. A G3 + H12 HEPA + carbon filter, an AI camera and power-loss recovery round it out. We rely on QIDI's listing and specs for all of this, with no test prints of our own.
What stands out
- QIDI BOX with 65°C drying and auto reload
- Up to 16 colors (several boxes)
- 65°C heated chamber, 370°C nozzle
- 270×270×256mm, 600mm/s CoreXY
- G3 + H12 HEPA + carbon filter
Who it fits
Good fit for
Makers who want color prints and also run nylon, PC or carbon-fiber filaments that need dry spools and a hot chamber.
Who should skip it
PLA-only hobbyists, who pay for a heated chamber and hardened extruder they will not use, and anyone needing more than 270mm of width.
Verdict: A multicolor combo built to handle engineering filaments as well as PLA.
QIDI Q2 Combo key specs
65°C heated chamber
Less warping on ABS, PA and PC.
370°C nozzle
Reaches high-temperature engineering materials.
QIDI BOX, 65°C drying
Spools stay dry while they print.
Hardened steel dual gear
Handles carbon and glass-fiber blends.
270×270×256mm
Mid-size build volume.
Inside the Q2 Combo
The Q2 is a full-metal CoreXY printer in a flame-retardant chamber with closed-loop temperature control. Its nozzle acts as the leveling probe, so leveling does not depend on the bed surface, and QIDI fits 1.5GT belts to reduce vertical fine artifacts. The QIDI BOX adds NFC recognition for QIDI filament, automatic reloading and its own monitoring with automatic power cutoff.
Running mixed materials on the Q2 Combo
Load the QIDI BOX, let it hold spools at 65°C, and the NFC tags fill in settings for QIDI filament; other brands need manual profiles. Tangle and run-out detection plus the AI camera help on long multi-material jobs, and power-loss recovery resumes after an outage. The triple filter is there for ABS and PA fumes.
Before buying the Q2 Combo
Checks.
Check before you buy
- Your Q2 Combo parts fit 270×270×256mm
- You will print Q2 Combo jobs in ABS, PA or CF blends
- You know one QIDI BOX may not cover 16 colors
The product at a glance
QIDI Q2 Combo 3D Printer
Best for: Multi-material engineering parts
- Build Volume
- 270x270x256mm
- Print Speed
- 600mm/s
- Multicolor Capacity
- Up to 16-color
- Leveling Type
- Full auto leveling
- Motion Structure
- CoreXY
- Extruder Type
- Hardened steel dual-gear
View on Amazon: QIDI Q2 Combo 3D Printer Affiliate link
QIDI Q2 Combo: QIDI BOX with 65°C drying, up to 16 colors, 65°C chamber, 370°C nozzle, 270×270×256mm, triple filter, AI camera.
Pros
- Color plus engineering filaments
- Dries spools while printing
- Hot chamber and nozzle
Cons
- Slots per BOX not stated
- NFC presets for QIDI spools only
- 270mm width limit
Good fit if
- You want multicolor nylon or PC parts
Skip if
- You print only PLA on your Q2 Combo
Verdict: A heated-chamber color printer for engineering filaments.
Specifications side by side
| Spec | QIDI Q2 Combo 3D Printer |
|---|---|
| Build Volume | 270x270x256mm |
| Print Speed | 600mm/s |
| Multicolor Capacity | Up to 16-color |
| Leveling Type | Full auto leveling |
| Motion Structure | CoreXY |
| Extruder Type | Hardened steel dual-gear |
| Chamber Heating | 65℃ |
| Color Printing | Multi-Color |
| Leveling | Auto Leveling |
| Features | High Speed, Built-in Camera, Heated Chamber |
| Dimensions | 21 × 20 × 23 inches |
| Size | Q2 Combo |
| Color | silver |
Frequently asked questions
How hot is the QIDI Q2 Combo chamber?
QIDI heats it to 65°C with a PTC heater.
Does the QIDI BOX in the Q2 Combo keep spools dry during a print?
Yes, it holds spools at 65°C while printing.
What build volume does the Q2 Combo have?
270×270×256mm.
Can the Q2 Combo print carbon fiber?
Yes, QIDI names carbon and glass-fiber composites and fits a hardened steel extruder.
See also
- ziro glitter pla filament twinkling red review
- sunlu high speed matte petg 4kg pastel bundle review
- sunlu silk pla plus 4kg gold silver black white review
- r qidi technology qidi max4 3d printer review
- r qidi technology qidi q2 3d printer review
- R QIDI Technology QIDI Plus5 Heated Chamber 3D Printer Review: Who It Fits and Who Should Skip It
- QIDI Plus4 Heated Chamber 3D Printer Review: Who It Fits and Who Should Skip It
- QIDI Max4 Combo Review: Who It Fits and Who Should Skip It (2026)
- r qidi technology qidi q2 combo 3d printer review
- easycargo 30pcs 3d printer heatsink review
