Phrozen 10.1" Metal Resin Vat for Sonic Mighty and Revo Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Phrozen's 10.1-inch metal resin vat is a replacement or spare tank for its 10.1-inch printers: the Sonic Mighty 8K, Mighty 12K, Revo 14K and Revo 16K. It ships with nFEP release film already fitted and tensioned, so it goes straight onto the printer. The frame is CNC-machined anodized aluminum, there is a corner spout for pouring resin back into the bottle or a filter, and the inside walls carry resin level marks. Phrozen gives outer dimensions of 12.1×7.6×1.3 inches and inner dimensions of 9.8×6.2×1.3 inches, and says the vat works with any 405nm resin, from standard and tough to water-washable and castable. The main reason to own a second vat is resin changes: keep one tank for grey model resin and another for a colored, clear or castable resin, and swap without pouring out and cleaning. It is also the fix for a vat with a dented frame or a film that keeps puncturing. Listing and spec fields from Phrozen are the basis here; we did not use the vat.
What stands out
- Fits Sonic Mighty 8K/12K, Revo 14K/16K
- nFEP film pre-installed and tensioned
- Anodized CNC aluminum
- Pour spout and level marks
- Inner 9.8×6.2×1.3in
Who it fits
Good fit for
Owners of Phrozen's 10.1-inch Mighty and Revo printers who switch between resins or need a replacement tank.
Who should skip it
Owners of other Phrozen sizes (Mini, Mega) or other brands, and anyone who only needs fresh film for an intact vat.
Verdict: A ready-to-fit spare vat that makes resin swaps on Mighty and Revo printers far less messy.
Phrozen 10.1-inch vat specs
nFEP pre-installed
Film fitted and tensioned at the factory.
CNC anodized aluminum
Rigid frame that resists corrosion.
Corner pour spout
Return resin to the bottle with less dripping.
Outer 12.1×7.6×1.3in
Phrozen's stated outer size.
405nm resins
Works with standard, tough, washable and castable.
Why keep a second Phrozen vat
Changing resin in a single vat means draining, filtering and wiping it clean every time, and leftover pigment can tint the next resin. With two vats, the grey or standard resin can stay in one tank under a cover while the other holds a clear, tough or castable resin. A spare also keeps a printer running when a film tears mid-week. Because the film comes tensioned, there is no film change or tension check before the first print.
Using the Phrozen 10.1-inch vat
Slide it into the printer's vat rails so the alignment holes seat, and fill to the level marks rather than to the brim. Pour excess resin back through a filter using the corner spout after a session. The nFEP film is the wear part: keep sharp tools out of the vat and check the film for clouding or dents between resin changes.
Before buying the Phrozen 10.1-inch vat
Checks.
Check before you buy
- You own a Sonic Mighty 8K/12K or Revo 14K/16K
- You want a separate Phrozen vat per resin
- Your Phrozen vat frame or film needs replacing
- You print with 405nm resins
The product at a glance
Phrozen 10.1" Metal Resin Vat
Best for: Mighty and Revo owners
- Primary Material
- Anodized Aluminum
- Release Film Type
- nFEP
- Printing Technology
- Resin
- Color
- Black
- Resolution
- 8K, 12K, 16K, 14K
- Dimensions
- 7.56 × 12.1 × 1.26 inches
View on Amazon: Phrozen 10.1" Metal Resin Vat Affiliate link
Phrozen 10.1-inch metal vat for Mighty 8K/12K and Revo 14K/16K: anodized aluminum, nFEP pre-installed, pour spout, level marks.
Pros
- Film fitted and tensioned
- Pour spout for cleaner resin returns
- Fits four Phrozen models
Cons
- 10.1-inch Phrozen printers only
- Film still wears over time
- Costs more than a film replacement
Good fit if
- You switch resins on a Mighty or Revo
Skip if
- You only need new FEP film
Verdict: A ready spare vat for Phrozen's 10.1-inch printers.
Specifications side by side
| Spec | Phrozen 10.1" Metal Resin Vat |
|---|---|
| Primary Material | Anodized Aluminum |
| Release Film Type | nFEP |
| Printing Technology | Resin |
| Color | Black |
| Resolution | 8K, 12K, 16K, 14K |
| Dimensions | 7.56 × 12.1 × 1.26 inches |
| Weight | 2.43 pounds |
| Size | Sonic Mighty 8K |
| Model | 3d-printing-materials |
Frequently asked questions
Which printers does the Phrozen 10.1-inch metal vat fit?
The Sonic Mighty 8K, Mighty 12K, Revo 14K and Revo 16K.
Does the Phrozen 10.1-inch vat come with film?
Yes, nFEP film comes pre-installed and tensioned.
What are the Phrozen 10.1-inch vat's inner dimensions?
9.8×6.2×1.3 inches, per Phrozen.
Which resins work in the Phrozen 10.1-inch vat?
Any 405nm resin, including standard, tough, water-washable and castable.
Why buy a second vat for a Phrozen Mighty or Revo?
To keep different resins in separate tanks and swap without cleaning.
Featured in
See also
- aladrs 8 9 inch LCD screen protector 5 pack review
- hikudiy 290x210mm fep release film 6 pack review
- chitu systems photon mono m5 m5s 12k LCD screen review
- phrozen 3pcs acf film high review
- phrozen wash cure kit review
- Phrozen Hands-Free Resin Bottle Mixer and Heater Review: Specs, Pros and Cons
- Phrozen 16K Upgrade Kit for Sonic Mighty 14K Review: Who It Fits
- Phrozen 15-Inch Resin Vat for Sonic Mega 8K S Review: Who It Fits
- steam and go steam go 10 in 1 review
- looptone 10 in 1 vinyl review
