As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Aladrs 8.9" LCD Screen Protector 5-Pack (Saturn, Mono X) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This Aladrs pack holds five 0.1mm PET screen protectors cut for 8.9-inch 4K resin printers; the listing names the original ELEGOO Saturn, the Anycubic Photon Mono X and the Voxelab Proxima 8.9. The job of a screen film is cheap insurance: if the vat's FEP film tears, or resin drips while you fill or drain the vat, it lands on the film instead of the LCD, and a stained film costs far less than a new screen. Aladrs states more than 95% light transmittance so exposure is not affected, and a double-sided laminated PET that resists scratches and resin. After fitting, the printer only needs to be re-leveled, per Aladrs, since the film adds 0.1mm above the screen. The listing gives no adhesive type and the spec dimensions (7.87×4.72in) look like the package or sheet rather than a confirmed active-area cut, so compare with your screen. Our assessment uses Aladrs' listing and spec fields alone; we have not fitted the film.

What stands out

  • 5 x screen protector film
  • 8.9-inch 4K LCDs: Saturn, Mono X, Proxima 8.9
  • PET, 0.1mm, double-side laminated
  • Over 95% light transmittance
  • Re-level after fitting

Who it fits

Good fit for

Owners of the original ELEGOO Saturn, Photon Mono X or Proxima 8.9 who want to protect the LCD from resin leaks and FEP tears.

Who should skip it

Owners of 10.1-inch or 6-inch printers, and anyone whose screen already has a factory protector in good condition.

Verdict: Cheap, sensible LCD protection for 8.9-inch 4K resin printers, with five spares in the pack.

Aladrs 8.9-inch screen film specs

8.9-inch cut

For 4K Saturn, Mono X and Proxima 8.9 screens.

0.1mm PET

Thin enough that only a re-level is needed.

Over 95% transmittance

Aladrs says exposure is unaffected.

Double-side laminated

Resists scratches and resin.

5 films

Spares for when one gets stained.

Why an 8.9-inch printer needs a screen film

On LCD resin printers, the vat's FEP film is the only thing between liquid resin and the screen. A puncture from a failed print or a scraper, or a drip while pouring resin back, can leave cured resin on the LCD itself, which is hard to remove without scratches. A sacrificial film catches that instead. Replacing a stained film is a few minutes' work, and with five in the box there is always a spare.

Fitting the Aladrs 8.9-inch film

Clean the LCD with isopropyl alcohol and a lint-free cloth, let it dry, and lay the film from one edge to push out bubbles. Trapped dust shows as a spot in every layer, so fit it in a clean area. Re-level the build plate afterwards, as Aladrs advises, and run a short exposure test to confirm nothing changed. Swap the film whenever it is scratched, clouded or has resin on it.

Before buying the Aladrs 8.9-inch film

Checks.

Check before you buy

  • Your printer has an 8.9-inch 4K LCD like the Saturn or Mono X
  • You will re-level after fitting the Aladrs film
  • Your Aladrs film fits the screen's active area
  • You want five Aladrs spares for resin accidents

The product at a glance

Aladrs 8.9 inch Screen Protector

Best for: 8.9-inch LCD protection

Primary Material
PET
Dimensions
7.87 × 4.72 × 0.5 inches

View on Amazon: Aladrs 8.9 inch Screen Protector Affiliate link

Aladrs 8.9-inch screen protector 5-pack: 0.1mm double-laminated PET, over 95% transmittance, for Saturn, Mono X, Proxima 8.9.

Pros

  • Protects the LCD from resin leaks
  • Five films per pack
  • Thin 0.1mm PET

Cons

  • Re-leveling needed after fitting
  • Adhesive type not stated
  • 8.9-inch 4K screens only

Good fit if

  • You run a Saturn, Mono X or Proxima 8.9

Skip if

  • Your printer is 10.1-inch or larger

Verdict: Cheap LCD insurance for 8.9-inch resin printers.

Specifications side by side

Spec Aladrs 8.9 inch Screen Protector
Primary Material PET
Dimensions 7.87 × 4.72 × 0.5 inches
Size 8.9 inch
Color Tranparent
Model ALA-3D-021

Frequently asked questions

Which printers does the Aladrs 8.9-inch screen protector fit?

Aladrs names the ELEGOO Saturn, Anycubic Photon Mono X and Voxelab Proxima 8.9, and other 8.9-inch 4K printers.

Does the Aladrs 8.9-inch film affect exposure?

Aladrs states over 95% light transmittance and says printing is unaffected.

How thick is the Aladrs 8.9-inch film?

0.1mm PET.

Do I need to re-level after fitting the Aladrs 8.9-inch film?

Yes, Aladrs says the printer only needs re-leveling.

How many Aladrs 8.9-inch films come in a pack?

Five.

See also