OVERTURE ABS Black 1kg 1.75mm Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
OVERTURE ABS in black is a 1kg spool of general-purpose ABS for parts that need more heat tolerance and toughness than PLA, such as car interior clips, enclosures, printer parts and prototypes. OVERTURE highlights a glossy surface straight off the bed and a spool that is easy to live with: a grid layout to tame loose ends, a printed length and weight gauge, a viewing hole to see how much is left, and a wider center for smoother feeding. Diameter is CCD-measured to ±0.02mm. What is missing is any temperature or heat-resistance figure, so set it up from a standard ABS profile. This review draws only on OVERTURE's listing.
What stands out
- Glossy black finish
- Spool with weight gauge and viewing hole
- ±0.02mm CCD measured
Who it fits
Good fit for
Owners of enclosed printers who print functional black parts in ABS, and anyone who likes to see at a glance how much filament is left.
Who should skip it
Owners of open-frame printers in cool or drafty rooms, anyone who cannot ventilate ABS fumes, and buyers who want published settings and heat figures.
Verdict: A tidy everyday black ABS with a helpful spool; the usual ABS enclosure and ventilation rules apply.
OVERTURE ABS Black specs
ABS, black
Tougher and more heat tolerant than PLA; can be acetone smoothed.
Glossy finish
Parts come off shiny with less post-processing.
±0.02mm, CCD measured
Even extrusion and layer adhesion.
Gauge and viewing hole on spool
Check remaining length and weight before a long print.
Wider spool center
Turns freely on most holders.
No temperatures or heat figure
Use a standard ABS profile.
The spool
A 1kg (2.2 lb) spool of 1.75mm black ABS. The spool design is the most specific part of the listing: grid sides for clipping the loose end, a printed scale for length and weight, and a window into the core. Unopened spools keep for a year when stored properly, says OVERTURE.
Printing black ABS
Start with your slicer's ABS profile on an enclosed printer with the bed hot and the part fan low or off. A brim helps large parts stay down. Black ABS is forgiving visually, since it hides layer lines well. Print with ventilation or a filtered enclosure because of ABS fumes.
Before you buy
OVERTURE ABS checklist.
Check before you buy
- Your printer is enclosed or draft-free
- Your bed reaches typical ABS temperatures
- You can vent ABS fumes
- You can set up ABS without listed settings
The product at a glance
OVERTURE 1kg 1.75mm ABS Filament
Best for: Functional black parts
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02 mm
- Surface Finish
- Glossy
- Printing Technology
- FDM
View on Amazon: OVERTURE 1kg 1.75mm ABS Filament Affiliate link
OVERTURE ABS, black, 1.75mm, 1kg: glossy finish, ±0.02mm CCD-measured, spool with grid layout, length/weight gauge, viewing hole and wider center; 1-year shelf life; no temperatures listed.
Pros
- Glossy black parts
- Easy-to-read spool gauge
- Tight tolerance
Cons
- No print settings or heat figure
- Needs enclosure and ventilation
Good fit if
- You print functional black ABS parts
- You have an enclosed printer
Skip if
- You cannot vent OVERTURE ABS fumes
Verdict: An everyday black ABS with a gauge-marked spool.
Specifications side by side
| Spec | OVERTURE 1kg 1.75mm ABS Filament |
|---|---|
| Material Type | ABS |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | ±0.02 mm |
| Surface Finish | Glossy |
| Printing Technology | FDM |
| Compatible Material | ABS |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Abs Black |
| Model | OVA175 |
Frequently asked questions
What temperature should I print OVERTURE ABS at?
The listing gives none; use a standard ABS profile and adjust.
Does OVERTURE ABS print glossy?
OVERTURE says it gives a glossy finish straight off the bed.
What is special about the OVERTURE ABS spool?
It has a grid layout for loose ends, a length and weight gauge, a viewing hole and a wider center.
What diameter tolerance does OVERTURE ABS have?
±0.02mm, measured by a CCD system.
ABS or ASA for black parts?
Choose ABS for indoor functional parts and acetone smoothing; choose ASA for black parts that will sit in sunlight outdoors.
Featured in
See also
- yousu peba like 95a tpu filament review
- mika3d glow in the dark rainbow pla review
- mika3d 12 spool silk pla filament bundle review
- overture high speed pla filament review
- overture high speed petg filament review
- OVERTURE Matte PLA 1.75mm Filament Review: Who It Fits and Who Should Skip It
- OVERTURE 1.75mm 95A TPU Filament Review (2026): A Spec-Based Look
- OVERTURE PLA Plus 1.75mm Filament Review: Specs, Pros and Cons
- longer lk10 plus high speed 3d printer review
- unxuey 50pcs 3d printer heatsink review
