OVERTURE 1.75mm 95A TPU Filament Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
OVERTURE's TPU in Digital Blue is a $20.69, 1kg roll of 1.75mm flexible filament with a Shore hardness of 95A, the common middle ground that bends and rebounds yet is still firm enough to print on most machines. The listing highlights strong layer bonding and a smooth finish, a day of drying before it ships in a resealable foil bag, and gives one useful handling figure: re-dry for more than 8 hours at 65°C if it picks up moisture. It names robotics, fashion and other flexible parts as uses. No print temperatures or speeds are listed. This review is drawn from the listing only.
What stands out
- Shore 95A: flexible but printable
- Resealable foil bag for storage
- Drying guide of 8+ hours at 65°C
- Layer bonding pitched as a strength
Who it fits
Good fit for
Makers producing bumpers, seals, watch straps, robot tyres, protective sleeves or cable strain reliefs who need parts that flex and spring back.
Who should skip it
Skip it if your printer has a long, loose Bowden path or you want very soft rubber-like parts; 95A is firm-flexible, not squishy, and settings are not supplied.
Verdict: A sensible first TPU roll at a fair price, best on direct-drive printers.
TPU specs decoded
Shore 95A
Roughly the feel of a skateboard wheel or shoe sole: bends under force, then returns.
1.75mm, 1kg (2.2 lb)
Standard roll size for most hobby printers.
Dry above 8 h at 65°C
TPU absorbs moisture quickly; drying restores clean extrusion.
1-year sealed shelf life
Unopened, the roll keeps about a year if stored well.
Why 95A matters
Softer TPUs tend to buckle in the extruder, while harder ones lose their flex. OVERTURE picked 95A to balance softness and resilience. The roll is dried for 24 hours, then sealed in a foil pouch that can be closed again, and the listing advises storing it with silica gel. The spec record repeats a generic model code used on OVERTURE's PLA listings, so ignore that field.
Getting good flexible prints
Print slowly and steadily, reduce or disable retraction, and keep the filament path short and guided; direct-drive extruders handle TPU far more easily than Bowden setups. Since no temperatures are provided, start from your slicer's TPU preset. If you hear popping or see fuzzy strings, dry the roll at 65°C for at least 8 hours as the listing suggests.
Flexible filament checklist
Make sure your printer suits TPU.
Check before you buy
- Direct-drive or short, tight filament path
- You can print slowly with little retraction
- You have a dryer or oven for 65°C
- Your parts need flex, not softness
The product at a glance
OVERTURE 1.75mm 95A TPU Filament (1kg)
Best for: Flexible parts on direct-drive printers
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Shore Hardness
- 95A
- Printing Technology
- FDM
- Dimensions
- 8.78 × 2.95 × 8.23 inches
View on Amazon: OVERTURE 1.75mm 95A TPU Filament (1kg) Affiliate link
A $20.69, 1kg roll of OVERTURE TPU 95A in Digital Blue: 1.75mm flexible filament with strong layer bonding claims, shipped dried in a resealable foil bag, with a 65°C/8+ hour drying guide.
Pros
- Middle-ground 95A hardness
- Reclosable foil packaging
- Clear drying instructions
Cons
- No temperature or speed settings
- Tricky on long Bowden setups
- Spec record repeats a PLA model code
Good fit if
- You print bumpers, gaskets or straps
- The extruder sits right on the hotend
Skip if
- Soft, rubber-band flex is the goal
- You only own a long-Bowden printer
Verdict: A fair-priced, everyday flexible TPU.
Specifications side by side
| Spec | OVERTURE 1.75mm 95A TPU Filament (1kg) |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Dimensions | 8.78 × 2.95 × 8.23 inches |
| Weight | 2.2 pounds |
| Size | TPU |
| Color | 1kg Digital Blue |
| Model | UK-MATTEPLA17511 |
Frequently asked questions
How flexible is Shore 95A?
It bends and rebounds but is still firm; it is not a soft rubber.
How should I dry it?
OVERTURE says more than 8 hours at 65°C.
Does it work on Bowden printers?
The listing claims broad compatibility, but TPU is generally harder to feed through long Bowden tubes.
Are print temperatures listed?
No, so begin with a TPU preset.
Featured in
See also
- overture pla plus review
- jamg he dental guide resin review
- jamg he dental pro model resin review
- overture high speed pla filament review
- overture high speed petg filament review
- OVERTURE Matte PLA 1.75mm Filament Review: Who It Fits and Who Should Skip It
- OVERTURE Silk PLA Grey 1.75mm Review: Who It Fits and Who Should Skip It
- OVERTURE 1kg White ASA Filament Review (2026): A Spec-Based Look
- fungdo LCD 3d printer review
- hyako s1 3d flexible back review
