MIKA3D Glow in the Dark Rainbow PLA Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
MIKA3D's Glow in the Dark Rainbow PLA combines two effects on one 1kg spool: the color shifts every 5-10 meters, so a print bands through several colors, and the plastic glows after charging. To get the glow, MIKA3D says to put the finished print under sunlight, UV light or short-wave visible light below 450nm for about 20-30 minutes. It suits night lights, toys, Halloween decor, glow keychains and kids' projects. MIKA3D recommends a new nozzle of 0.4mm or larger for best results, and glow filaments are known to wear brass faster. The spool ships with an extra printing tool and a resealable bag. No temperatures are listed. This summary uses MIKA3D's listing.
What stands out
- Rainbow color change every 5-10m
- Glows after 20-30 min in sun or UV
- Resealable bag and a bonus tool
Who it fits
Good fit for
Parents, teachers and hobbyists printing toys, night-light shades, glow-in-the-dark decor and gifts where a fun look matters more than precision.
Who should skip it
Anyone who needs a single consistent color, a precise color sequence, or functional parts; and owners who do not want extra wear on a fine brass nozzle.
Verdict: A fun novelty PLA for kids' and seasonal prints; charge prints in bright light and keep a spare nozzle handy.
MIKA3D glow rainbow PLA specs
Color changes every 5-10m
Small prints may show one or two colors; large ones band through several.
Glow after charging
20-30 minutes in sunlight, UV or light below 450nm.
New 0.4mm or larger nozzle advised
Fine nozzles can clog and glow filament wears brass.
1kg, 1.75mm PLA
Standard PLA printing on most printers and 3D pens.
Resealable zip bag and bonus tool
Store the spool dry between uses.
No temperatures listed
Start from a generic PLA profile.
Spool and packaging
A 1kg spool, vacuum-packed with desiccant and shipped with a reusable zip bag and an extra 3D printing tool. MIKA3D advises against leaving the raw filament in long sunlight and asks you to tuck the free end into the spool holes after each print to prevent tangles. One bullet calls it silk PLA, which looks like a copy error.
Printing and charging
Use a standard PLA profile with a fresh nozzle of 0.4mm or larger. Because colors change by length, the color pattern depends on part size; you cannot choose where each color falls. After printing, leave the part in direct sun or under a UV lamp for 20-30 minutes, then see the glow in the dark.
Before you buy
MIKA3D glow rainbow checklist.
Check before you buy
- You want random rainbow banding, not set colors
- You can fit a fresh 0.4mm or larger nozzle
- Prints will be decor or toys
- You can charge prints under sun or UV
The product at a glance
MIKA3D Fast Color Change Glow Rainbow PLA 1kg
Best for: Glow toys and decor
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Surface Finish
- Glow in Dark, Silk
- Features
- Glow in the Dark
- Color Effect
- Rainbow
View on Amazon: MIKA3D Fast Color Change Glow Rainbow PLA 1kg Affiliate link
MIKA3D Glow in the Dark Rainbow PLA, 1.75mm, 1kg: color change every 5-10m, glows after 20-30 min of sun/UV/<450nm light, new 0.4mm+ nozzle advised, reusable zip bag and bonus tool; no temperatures listed.
Pros
- Color change plus glow
- Fun for kids and decor
- Comes with a resealable bag
Cons
- Color sequence is random
- Wears nozzles; no settings listed
Good fit if
- You print toys and night decor
- You like surprise color banding
Skip if
- You need one exact color
Verdict: A rainbow color-change PLA that glows after charging.
Specifications side by side
| Spec | MIKA3D Fast Color Change Glow Rainbow PLA 1kg |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Surface Finish | Glow in Dark, Silk |
| Compatible Material | PLA |
| Features | Glow in the Dark |
| Size | 1KG |
| Color Effect | Rainbow |
| Weight | 2.2 pounds |
| Color | 1 Spool - Glow Rainbow |
| Model | Glow in Dark Rainbow PLA Filament |
Frequently asked questions
How often does MIKA3D rainbow PLA change color?
About every 5-10 meters of filament.
How do I charge MIKA3D glow prints?
Expose the print to sunlight, UV light or visible light under 450nm for about 20-30 minutes.
What nozzle does MIKA3D recommend for glow PLA?
A new nozzle of 0.4mm or larger.
What temperature does MIKA3D glow PLA print at?
The listing gives none; start from a standard PLA profile.
Glow rainbow or plain glow PLA?
Choose the glow rainbow for colorful daytime looks plus a night glow; choose single-color glow PLA when you need an even color or a brighter, uniform glow.
Featured in
See also
- mika3d 12 spool silk pla filament bundle review
- flashforge petg pro filament 1 75mm review
- flashforge asa filament 1 75mm black review
- mika3d silk orange rainbow pla filament review
- MIKA3D Dual Color Silk PLA 6 x 250g Bundle Review (2026)
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
