LOVOON Tri-Color Silk PLA 4x200g Bundle Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The LOVOON tri-color silk bundle is aimed at people who want to try several three-color effects before committing to a full 1kg spool, and it also works as a gift. You get four 200g spools (800g total) in four sets: red-blue-yellow, red-blue-green, orange-blue-green and red-purple-gold. Each strand carries three colors, so the visible shade shifts with the viewing angle. LOVOON lists 190-230°C nozzle, 60°C bed and a 0.4mm or larger nozzle, and the filament also fits 3D pens. Two figures in the listing disagree: one bullet says to stay below 150mm/s, another gives 30-200mm/s, and the spec weight reads 2.2 pounds against 0.8kg in the size field.
What stands out
- Four tri-color sets in one box
- Fits FDM printers as well as 3D pens
- Settings listed (190-230°C, 60°C bed)
Who it fits
Good fit for
Hobbyists and gift buyers who want to sample four tri-color silk looks for vases, figures and small decor without buying four full spools.
Who should skip it
Anyone printing large models (200g runs out fast), functional parts, or who wants one consistent color across a whole project.
Verdict: A good sampler of tri-color silk effects; treat it as a set for small prints.
LOVOON bundle details
4 x 200g, 800g total
Small spools for small models.
Red-Blue-Yellow, Red-Blue-Green, Orange-Blue-Green, Red-Purple-Gold
Three colors per strand.
1.75mm, ±0.02mm
Fits printers and 3D pens.
Nozzle 190-230°C, bed 60°C
Listed starting point.
Below 150mm/s vs 30-200mm/s
The listing states both.
0.4mm nozzle or larger
Stated for smoother feeding.
Small spools, big effect
A tri-color strand shows a different hue on each side of every line, so rounded shapes cycle through red, blue and yellow (or the set's colors) as they curve. 200g is enough for several small vases or a batch of figures, not a large bust. LOVOON packs the spools in a gift box after drying them for 24 hours and vacuum sealing them with desiccant.
Printing the sets
Use a 0.4mm or larger nozzle and stay under 150mm/s, the more cautious of the two speed figures. Small spools have a tight core, so check that your spool holder and feeder pull them without snagging. Before a long print, weigh the spool so you do not run out halfway.
Before you buy
Checks for the LOVOON 4x200g silk set.
Check before you buy
- You print small models or use a 3D pen
- You want to sample four tri-color sets
- Your holder can feed small 200g LOVOON reels
- You accept 800g rather than 1kg
The product at a glance
LOVOON Silk PLA 200g x 4 Bundle
Best for: Sampling tri-color silk looks
- Material Type
- Silk PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 0.8 kg
- Max Print Speed
- 200mm/s
- Dimensional Accuracy
- ±0.02mm
- Surface Finish
- Silk, Glossy
View on Amazon: LOVOON Silk PLA 200g x 4 Bundle Affiliate link
LOVOON tri-color silk PLA, 4 x 200g (RBY, RBG, OBG, RPGold): 190-230°C, 60°C bed, ±0.02mm, fits 3D pens; listing gives two speed ranges.
Pros
- Four color sets to try
- Settings in the listing
- Gift box packaging
Cons
- Only 200g per color set
- Conflicting speed and weight figures
Good fit if
- You print small decor
- You want to sample effects
Skip if
- You print large single-set models
Verdict: A tri-color silk sampler for small prints and gifts.
Specifications side by side
| Spec | LOVOON Silk PLA 200g x 4 Bundle |
|---|---|
| Material Type | Silk PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 0.8 kg |
| Max Print Speed | 200mm/s |
| Dimensional Accuracy | ±0.02mm |
| Surface Finish | Silk, Glossy |
| Color Printing | Multi-Color |
| Compatible Material | PLA |
| Finish | Silk |
| Color Effect | Rainbow |
| Dimensions | 5.91 × 1.38 × 1.38 inches |
| Weight | 2.2 pounds |
| Size | 0.8 kg |
| Color | Tricolor |
| Model | 3D Printer Filament pla |
Frequently asked questions
Which colors are in the LOVOON bundle?
Red-Blue-Yellow, Red-Blue-Green, Orange-Blue-Green and Red-Purple-Gold, 200g each.
Can LOVOON silk PLA be used in a 3D pen?
Yes, the listing says it suits most 3D pens.
What temperature does LOVOON list?
Nozzle 190-230°C and bed 60°C.
What speed should I use?
The listing gives both below 150mm/s and 30-200mm/s; staying under 150mm/s is the safer choice.
Bundle or a full 1kg tri-color spool?
Pick the bundle to try four looks on small prints; pick a 1kg spool for one large model in one color set.
Featured in
See also
- tinmorry petg cf marble grey filament review
- kretrum purple blue dual color silk pla review
- fxaagfh matte rainbow pla filament review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- tkid 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
