Kretrum Purple & Blue Dual Color Silk PLA Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Kretrum Dual Color Silk PLA in purple and blue is an easy pick for glossy decor that changes color as you walk around it. The two colors sit side by side in each strand, so a vase or figure shows purple from one angle and blue from another. Kretrum gives full settings: nozzle 190-230°C (it says 210°C gives the best gloss), bed 25-65°C and 30-300mm/s, with a ±0.02mm tolerance. The cardboard spool has graduated markings so you can see how much is left. One copy error: the "what you get" bullet names a red and gold spool, while the title, color field and other bullets all say purple and blue.
What stands out
- Purple-to-blue color shift by angle
- 210°C tip for best gloss
- Spool marked with usage lines
Who it fits
Good fit for
Makers printing vases, ornaments and gifts who like a purple-blue shimmer and want listed temperatures and speeds to start from.
Who should skip it
Anyone who needs strong mechanical parts, or whose AMS or feeder struggles with cardboard spools.
Verdict: A well-documented dual color silk PLA for decorative prints in purple and blue.
Kretrum purple & blue facts
Purple & blue coextruded
Color changes with viewing angle.
Nozzle 190-230°C, 210°C for gloss
Listed sweet spot for shine.
Bed 25-65°C
Works on most PLA beds.
30-300mm/s
Slow down outer walls for gloss.
1.75mm ±0.02mm
Also fits 3D pens.
Graduated cardboard spool
Shows remaining filament.
Spool and packaging
Kretrum dries the filament for 24 hours and vacuum seals it, and both the box and the spool use recycled material. The scale printed on the spool side is useful before a long print. Kretrum says the PLA meets FDA and RoHS standards; that refers to the raw material, not to printed parts being food safe.
Getting the color shift
Rounded shapes show the purple-blue split best, since each curve turns a different side of the strand toward you. Start at 210°C, as Kretrum suggests, and print outer walls at the low end of the speed range. Flat-sided prints tend to show one color per face.
Before you buy
Checks for the Kretrum purple-blue spool.
Check before you buy
- You want a purple and blue shimmer
- Your prints are ornaments rather than brackets
- Your feeder takes cardboard spools
- You are fine starting at 210°C
The product at a glance
Kretrum Silk PLA Dual Color 1kg
Best for: Purple-blue decorative prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 300 mm/s
- Dimensional Accuracy
- +/- 0.02 mm
- Surface Finish
- Silk
View on Amazon: Kretrum Silk PLA Dual Color 1kg Affiliate link
Kretrum purple & blue dual color silk PLA, 1kg: 190-230°C (210°C gloss), 25-65°C bed, 30-300mm/s, ±0.02mm, graduated cardboard spool.
Pros
- Full settings listed
- Shifting two-tone shine
- Usage scale on spool
Cons
- Cardboard spool may not suit every feeder
- Copy error names red & gold
Good fit if
- You print vases and gifts
- You like purple-blue tones
Skip if
- You need functional strength
Verdict: A purple-blue color-shift silk with clear settings.
Specifications side by side
| Spec | Kretrum Silk PLA Dual Color 1kg |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 300 mm/s |
| Dimensional Accuracy | +/- 0.02 mm |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Finish | Silk |
| Color Effect | Dual Color |
| Dimensions | 8.27 × 8.27 × 2.36 inches |
| Weight | 2.2 pounds |
| Color | Silk Dual-color:purple&blue |
Frequently asked questions
What temperature gives the best gloss on Kretrum silk?
Kretrum says 210°C, within a 190-230°C range.
What colors does this Kretrum spool have?
Purple and blue; a bullet mentioning red and gold is a copy error in the listing.
How fast can it print?
30-300mm/s, with the bed at 25-65°C.
Does Kretrum silk work in a 3D pen?
Kretrum says it fits most FDM printers and 3D pens.
Dual color or single-color silk?
Choose dual color for a shifting two-tone look on curved prints; choose a single silk color when you want one even shade.
See also
- fxaagfh matte rainbow pla filament review
- 3dimsfila rock stone pla filament review
- hephi3d metallic silk pla 4 pack review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- snapmaker artisan dual extrusion 3d printer review
- xerox c310dni color printer review
