FXAAGFH Matte Rainbow PLA 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
FXAAGFH Matte Rainbow PLA is for people who print larger models and want a matte surface that moves through the rainbow. Unlike coextruded silk, the colors here follow one another along the length of the strand: five main colors blending through more than seven shades. That means the effect depends on size. FXAAGFH itself says a small object may show only one or two colors and suggests printing at least 220g in one go to see the full range. Settings are basic: 200-220°C nozzle, 0-60°C bed, ±0.03mm. The spec weight reads 14.1 ounces, which does not match the 1kg in the title.
What stands out
- Rainbow gradient along the strand
- Matte, low-shine finish
- Clear plastic spool
Who it fits
Good fit for
Makers printing big vases, lamps, busts or batches of parts in one job who want a matte multi-color look without a multi-material printer.
Who should skip it
Anyone printing small figures or keychains (one or two colors at most), or who wants a glossy silk shine.
Verdict: A matte rainbow PLA that rewards big prints; small ones only catch a slice of the gradient.
FXAAGFH rainbow details
Five main colors, 7+ shades
Colors change along the strand.
Print 220g+ to see all colors
Maker's own advice.
Nozzle 200-220°C, bed 0-60°C
Basic PLA window.
1.75mm ±0.03mm
Standard tolerance.
Matte finish
Hides layer lines, no gloss.
Spec weight 14.1 oz vs 1kg title
Listing figures disagree.
Spool and packaging
The filament comes on a clear plastic spool in a vacuum bag inside a paper box, so you can see how much is left at a glance. FXAAGFH claims better toughness and impact resistance than conventional PLA but gives no numbers, so treat that as a claim.
Planning a print for the gradient
Because the color changes with length, the amount of filament used decides how many colors show. A 250g vase may travel through the full spectrum, while a 20g model sits in one band. Printing several copies in one plate spreads the colors across parts instead of up one model.
Before you buy
Checks for FXAAGFH Matte Rainbow.
Check before you buy
- You print models of 220g or more
- You prefer matte over silk shine
- You are fine with a random start color
- Your bed runs 0-60°C
The product at a glance
FXAAGFH Matte Rainbow PLA 1kg
Best for: Large matte rainbow prints
- Material Type
- PLA
- Filament Diameter
- 1.75 mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/-0.03mm
- Surface Finish
- Matte
- Color Effect
- Rainbow
View on Amazon: FXAAGFH Matte Rainbow PLA 1kg Affiliate link
FXAAGFH Matte Rainbow PLA, 1kg on a clear spool: five main colors with 7+ shades along the strand, 200-220°C, ±0.03mm; print 220g+ to see every color.
Pros
- Matte multi-color look
- Works on any single-nozzle printer
- Clear spool shows what is left
Cons
- Small prints show 1-2 colors
- Weight figures disagree
Good fit if
- You print large vases or lamps
- You like matte
Skip if
- You print small figures
Verdict: A matte rainbow PLA built for big prints.
Specifications side by side
| Spec | FXAAGFH Matte Rainbow PLA 1kg |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75 mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/-0.03mm |
| Surface Finish | Matte |
| Compatible Material | PLA |
| Finish | Matte |
| Color Effect | Rainbow |
| Weight | 14.1 ounces |
| Size | 1 kilogram |
| Color | Matte Rainbow |
Frequently asked questions
Why does my FXAAGFH rainbow print show one color?
The colors run along the strand; FXAAGFH says to print at least 220g to see them all.
What temperature does FXAAGFH list?
Nozzle 200-220°C and bed 0-60°C.
Is the finish shiny?
No, it is matte.
How many colors are on the spool?
Five main colors with more than seven gradual shades.
Rainbow gradient or coextruded silk?
Choose this gradient for large matte prints that change color with height; choose coextruded silk for color that shifts with viewing angle on any size.
See also
- 3dimsfila rock stone pla filament review
- hephi3d metallic silk pla 4 pack review
- tecbears tpu filament 1 75mm review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- anycubic resin 3d printer review
- easycargo 30pcs 3d printer heatsink review
