As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

TINMORRY PETG-CF Marble Grey Filament Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

TINMORRY PETG-CF in marble grey is a sensible step up from plain PETG for drone parts, RC models and brackets, as long as your printer has a wear-resistant steel nozzle. The filament holds 15% short-cut carbon fiber, which stiffens parts and keeps warping low. Settings are spelled out: 240-270°C nozzle (above 260°C on a Bambu P1P or X1), a 75-90°C platform, and the cooling fan off for layers one to three. TINMORRY claims up to 300mm/s and names Bambu Lab, Creality K1C, QIDI MAX3, FLASHFORGE Adventurer 5M, Prusa MK4, Voron and AnkerMake M5C as tested printers. The listing gives no tensile or heat figures, so its strength claims stay general.

What stands out

  • 15% short-cut carbon fiber
  • Clear temperature and fan advice
  • Up to 300mm/s claimed

Who it fits

Good fit for

Owners of fast core-XY printers with a hardened nozzle who want stiffer, low-warp parts than PETG gives, such as drone frames and RC parts.

Who should skip it

Anyone still on a brass nozzle, anyone who needs heat resistance figures, or makers who sand parts without a dust mask.

Verdict: An approachable carbon fiber PETG with good setup notes; the hardened nozzle is not optional.

TINMORRY PETG-CF settings

15% carbon fiber masterbatch

Short fibers, not powder.

Nozzle 240-270°C

Above 260°C on Bambu P1P/X1.

Platform 75-90°C

Fan off for layers 1-3.

Up to 300mm/s

Maker's speed claim.

Dry 65°C for 8 h

Store below 20% RH.

Steel nozzle, 0.4mm+ (0.6mm better)

Brass wears out.

No strength or HDT data

Claims stay qualitative.

Why the carbon fiber matters

Short fibers make PETG stiffer and cut its tendency to warp, and TINMORRY says its formula clogs less than plain PETG. The marble grey color hides layer lines and fiber texture. The trade-off is abrasion: the listing tells you not to use brass and suggests a 0.6mm nozzle for smoother flow.

Printing and finishing

Dry the spool at 65°C for 8 hours, then print from a sealed box with desiccant. For stronger layer bonding, TINMORRY suggests higher infill, an enclosed printer and a lower fan percentage. Cutting or sanding CF parts makes fine carbon dust, so wear a mask and eye protection.

Before you buy

Checks for TINMORRY marble grey PETG-CF.

Check before you buy

  • A wear-resistant steel nozzle is installed
  • Your hotend reaches 270°C
  • You can dry filament at 65°C
  • You do not need published heat figures

The product at a glance

TINMORRY PETG-CF 1.75mm Filament

Best for: Stiff drone and RC parts

Material Type
PETG-CF
Filament Diameter
1.75mm
Net Weight
1 KG
Max Print Speed
300 mm/s
Features
High Speed, Carbon Fiber
Dimensions
8.66 × 8.27 × 2.76 inches

View on Amazon: TINMORRY PETG-CF 1.75mm Filament Affiliate link

TINMORRY PETG-CF marble grey, 1kg: 15% short carbon fiber, 240-270°C, 75-90°C bed, up to 300mm/s claimed, dry 65°C 8 h, steel nozzle required.

Pros

  • Stiff, low-warp parts
  • Detailed print tips
  • Many printers named

Cons

  • Steel nozzle needed
  • No strength or heat figures

Good fit if

  • You print drone or RC parts
  • You have a hardened nozzle

Skip if

  • You only have brass nozzles

Verdict: A carbon fiber PETG with clear setup advice.

Specifications side by side

Spec TINMORRY PETG-CF 1.75mm Filament
Material Type PETG-CF
Filament Diameter 1.75mm
Net Weight 1 KG
Max Print Speed 300 mm/s
Compatible Material PETG
Features High Speed, Carbon Fiber
Dimensions 8.66 × 8.27 × 2.76 inches
Weight 2.2 pounds
Size PETG-CF
Color Petg-cf-marble Grey
Model PETGCF-Grey

Frequently asked questions

What nozzle does TINMORRY PETG-CF need?

A wear-resistant steel nozzle of at least 0.4mm; TINMORRY says 0.6mm works better.

What temperatures does TINMORRY list?

240-270°C nozzle and 75-90°C platform, with the fan off for the first three layers.

What share of TINMORRY PETG-CF is carbon fiber?

15% short-cut carbon fiber masterbatch.

How fast can it print?

TINMORRY claims up to 300mm/s.

PETG-CF or plain PETG?

Choose PETG-CF for stiffer, low-warp parts on a hardened nozzle; choose plain PETG if you print with brass or want a glossy finish.

See also