IEMAI Marble ASA Filament (1.75mm, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
IEMAI's Marble ASA puts a stone-look color on a weather-resistant material, so it suits outdoor pieces where looks matter as much as toughness: garden ornaments, planter trims, house numbers, signs and birdhouse roofs. IEMAI says the ASA keeps its strength, shape and color through sun, rain and swings in outdoor temperature, and lists garden accessories, equipment housings, brackets and car accessories as uses. The 1kg, 1.75mm spool has a ±0.02mm tolerance and ships dried and vacuum sealed with desiccant. The print guidance is detailed: 240-270°C at the nozzle, a 70-95°C bed and 30-50mm/s, printed in an enclosed chamber with the fan off or low and a bed adhesive if needed. The title, though, says ≤200mm/s, far above the 30-50mm/s in the settings bullet; follow the slower figure first. We based this review on IEMAI's listing and spec fields, without printing it.
What stands out
- ASA, 1kg, Marble
- 1.75mm ±0.02mm
- 240-270°C, 70-95°C bed
- 30-50mm/s (title says ≤200mm/s)
- Enclosure, low fan advised
Who it fits
Good fit for
Makers of garden decor, planters, outdoor signs and housings that should look like stone and survive weather.
Who should skip it
Anyone without an enclosure, or anyone who wants to run ASA at high speed with no tuning.
Verdict: A weather-ready ASA with a stone look and full settings, best printed slow in an enclosure.
IEMAI Marble ASA specs
UV and weather resistant
Holds color and shape outdoors, per IEMAI.
240-270°C / 70-95°C bed
IEMAI's recommended window.
30-50mm/s
Settings bullet; the title's ≤200mm/s conflicts.
±0.02mm
Steady feeding on long outdoor prints.
Enclosed, fan off or low
Limits warping and layer splits.
Why a marble color on ASA
Most outdoor ASA comes in black, white or grey. A marble color gives garden and yard prints a stone look without paint, and ASA's UV stability means that look should not fade as fast as a PLA print would in sun. IEMAI also lists AMS and CFS compatibility in the title for multi-color setups.
Printing IEMAI Marble ASA
Follow IEMAI's enclosed-chamber advice: keep the fan off or low, use a bed adhesive on large flat parts and start at 30-50mm/s. Raise speed only after test prints show good layer bonding. Ventilate the room, since ASA gives off styrene-type fumes.
Before buying IEMAI Marble ASA
Checks.
Check before you buy
- Your printer is enclosed for IEMAI Marble ASA
- You want a stone look on outdoor prints
- Your hotend reaches 270°C for marble ASA
- You can vent fumes from ASA printing
The product at a glance
IEMAI ASA 1.75mm Filament 1kg
Best for: Outdoor stone-look decor
- Material Type
- ASA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 50mm/s
- Dimensional Accuracy
- ±0.02 mm
- Printing Technology
- FDM
View on Amazon: IEMAI ASA 1.75mm Filament 1kg Affiliate link
IEMAI Marble ASA 1kg: stone-look outdoor ASA, ±0.02mm, 240-270°C, 70-95°C bed, 30-50mm/s enclosed; title claims ≤200mm/s.
Pros
- Stone look without paint
- UV and weather resistant
- Detailed print guidance
Cons
- Speed figures conflict
- Needs an enclosure
- ASA fumes need venting
Good fit if
- You print marble-look garden or sign parts
Skip if
- You have no enclosure for marble ASA
Verdict: A stone-look ASA for weather-facing decor.
Specifications side by side
| Spec | IEMAI ASA 1.75mm Filament 1kg |
|---|---|
| Material Type | ASA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 50mm/s |
| Dimensional Accuracy | ±0.02 mm |
| Printing Technology | FDM |
| Compatible Material | ASA |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Marble |
| Model | IEMAI-ASA |
Frequently asked questions
What settings does IEMAI give for its Marble ASA?
240-270°C nozzle, 70-95°C bed and 30-50mm/s, enclosed, with the fan off or low.
Can IEMAI Marble ASA print at 200mm/s?
The title says ≤200mm/s, but the settings bullet says 30-50mm/s; start slow.
Is IEMAI Marble ASA good for outdoor decor?
Yes, IEMAI lists sun, rain and temperature resistance and garden uses.
What tolerance does the Marble ASA spool have?
±0.02mm on 1.75mm filament.
Does IEMAI Marble ASA work with an AMS?
The title lists Bambu Lab AMS and Creality CFS compatibility.
Featured in
See also
- polymaker fiberon pet cf17 carbon fiber review
- polymaker asa filament 1 75mm natural review
- polymaker high speed tpu 90a filament review
- iemai high speed petg filament review
- iemai petg filament 1 75mm review
- IEMAI Carbon Fiber PLA Filament Review: Specs, Pros and Cons
- IEMAI PETG-CF 1.75mm Matte Black Review: Who It Fits and Who Should Skip It
- IEMAI PETG-CF Carbon Fiber Filament (Matte Purple, 1kg) Review
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
