As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

IEMAI PETG-CF Carbon Fiber Filament (Matte Purple, 1kg) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

IEMAI's matte purple PETG-CF is a 1kg spool of PETG filled with 15% chopped carbon fiber, and it is one of the few CF spools sold in a real color rather than black or grey. That makes it a fit for parts that need CF stiffness and also sit in plain view: drone casings, camera rigs, cosplay hardware and product prototypes, where IEMAI says the matte texture hides layer lines. The listing gives a full profile: dry at 60°C for 5-8 hours, print at 230-250°C on a 60-80°C bed at up to 100mm/s, use a 0.4-0.6mm hardened or wear-resistant nozzle, and no enclosure is required. Tolerance is ±0.03mm, a little looser than the ±0.02mm many plain spools claim. Note that IEMAI's matte black spool from the same family states 20% fiber, so the fill differs by color. IEMAI also claims better heat resistance than plain PETG but gives no HDT figure. We compiled this from IEMAI's product page without printing the spool ourselves.

What stands out

  • PETG + 15% carbon fiber, 1kg
  • Matte purple finish
  • 230-250°C, 60-80°C bed, ≤100mm/s
  • Hardened 0.4-0.6mm nozzle
  • ±0.03mm tolerance

Who it fits

Good fit for

Makers of drone frames, camera mounts and visible prototypes who want carbon-fiber stiffness in a color other than black.

Who should skip it

Anyone on a soft brass nozzle, or anyone who needs a published heat deflection figure for hot parts.

Verdict: A stiff, matte, colored PETG-CF with a complete print profile, best for visible functional parts.

IEMAI purple PETG-CF specs

15% chopped carbon fiber

Stiffer and more stable than plain PETG; the black spool lists 20%.

230-250°C / 60-80°C bed

IEMAI's printing window.

≤100mm/s

Moderate speed; CF PETG rewards steady flow.

Hardened 0.4-0.6mm nozzle

Carbon fiber wears brass quickly.

Dry 60°C, 5-8h

Pre-print drying IEMAI recommends.

Why purple carbon-fiber PETG

Most CF filaments come only in black, so colored parts mean painting. IEMAI's purple keeps the fiber's benefits, stiffness and load stability for brackets, fixtures and housings, while giving a matte colored surface that hides layer lines on casings and decorative covers. It prints without an enclosure, so open-frame printers can run it too.

Running IEMAI purple PETG-CF

Swap in a hardened steel nozzle before the first spool, dry the filament as IEMAI suggests, and stay within 100mm/s. A 0.6mm nozzle lowers clog risk with chopped fiber. IEMAI lists compatibility with Bambu Lab X1, P1, A1 and A2L, Creality Ender, K1 and K2, and Prusa MK3/MK4 among others; check that your feeder path tolerates stiff CF strands.

Before buying IEMAI purple PETG-CF

Checks.

Check before you buy

  • Your printer has a hardened nozzle for the purple PETG-CF
  • You want the colored CF part to stay unpainted
  • You can dry IEMAI PETG-CF at 60°C first
  • Your parts need stiffness more than flex

The product at a glance

IEMAI PETG-CF Matte Purple 1kg

Best for: Visible stiff parts

Material Type
PETG-CF
Filament Diameter
1.75mm
Net Weight
1kg
Max Print Speed
≤100mm/s
Dimensional Accuracy
+/-0.03mm
Surface Finish
Matte

View on Amazon: IEMAI PETG-CF Matte Purple 1kg Affiliate link

IEMAI PETG-CF matte purple 1kg: 15% CF, ±0.03mm, 230-250°C, 60-80°C bed, ≤100mm/s, hardened nozzle, no enclosure needed.

Pros

  • Colored CF, no painting needed
  • Full print profile listed
  • Prints without an enclosure

Cons

  • Needs a hardened nozzle
  • Looser ±0.03mm tolerance
  • No HDT figure given

Good fit if

  • You want stiff purple PETG-CF drone or camera parts

Skip if

  • You print IEMAI CF on a brass nozzle

Verdict: A colored carbon-fiber PETG for stiff parts on display.

Specifications side by side

Spec IEMAI PETG-CF Matte Purple 1kg
Material Type PETG-CF
Filament Diameter 1.75mm
Net Weight 1kg
Max Print Speed ≤100mm/s
Dimensional Accuracy +/-0.03mm
Surface Finish Matte
Compatible Material PETG
Features Carbon Fiber
Finish Matte
Dimensions 7.5 × 7.2 × 2.2 inches
Weight 2.2 pounds
Color Matte Purple

Frequently asked questions

How much carbon fiber is in IEMAI matte purple PETG-CF?

15% chopped carbon fiber, per the listing; the matte black version lists 20%.

What settings does IEMAI give for purple PETG-CF?

230-250°C nozzle, 60-80°C bed and up to 100mm/s, after drying at 60°C for 5-8 hours.

Does IEMAI PETG-CF need a hardened nozzle?

Yes, IEMAI recommends a 0.4-0.6mm hardened steel or wear-resistant nozzle.

Does purple PETG-CF need an enclosure?

No, the listing says no enclosure is required.

What tolerance does the purple IEMAI CF spool have?

±0.03mm.

See also