Polymaker High Speed TPU 90A Filament (0.75kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Polymaker's High Speed TPU 90A (PD02001) is a 0.75kg black spool of flexible filament, and the 90A Shore hardness is the main reason to choose it: it is softer and more rubbery than the 95A TPU most printers handle by default, which suits grips, phone bumpers, gaskets, robot feet and wearable or fashion pieces. Polymaker also says it prints up to three times faster than ordinary TPU, aimed at owners of fast printers who find flexible filament painfully slow. The listing claims wear, oil and aging resistance, high elasticity, strong layer bonding and a smooth finish, with a ±0.03mm diameter tolerance. What it leaves out is any nozzle, bed or speed number, so the 3x claim has no baseline. Softer TPU is harder to push through a Bowden tube, so a direct drive extruder is the safer match. We took these points from Polymaker's listing and spec fields, without a test print.
What stands out
- TPU 90A, 0.75kg black, PD02001
- Claimed up to 3x faster than ordinary TPU
- ±0.03mm tolerance
- Wear, oil and aging resistant
- No print settings listed
Who it fits
Good fit for
Owners of direct drive printers who want soft, grippy parts such as bumpers, gaskets, feet and wearables.
Who should skip it
Bowden-tube printers, or anyone who needs a published temperature and speed profile.
Verdict: A soft, speed-tuned 90A TPU without listed settings, best on direct drive printers.
Polymaker TPU 90A specs
Shore 90A
Softer and more flexible than common 95A TPU.
Up to 3x faster
Versus ordinary TPU, per Polymaker; no figure given.
±0.03mm
Diameter tolerance on 1.75mm.
0.75kg spool
Less than a standard 1kg roll.
Oil and wear resistant
Suits seals, feet and protective parts.
What 90A changes in practice
At 90A, parts bend and compress more easily than 95A prints of the same shape, which matters for phone cases, watch straps, shock pads and soft robot grippers. Polymaker pairs that softness with a high-speed formula; the catch is that softer filament buckles more easily in the extruder, so feeding matters more than speed.
Printing Polymaker TPU 90A without listed settings
Start from your slicer's TPU preset and a direct drive extruder, keep retraction short or off, and raise speed in steps to find where Polymaker's faster flow holds. Dry the spool if prints turn stringy or bubbly, since TPU picks up moisture. Close any gap between drive gears and hotend where soft filament can kink.
Before buying Polymaker TPU 90A
Checks.
Check before you buy
- Your printer has a direct drive extruder for 90A TPU
- You want softer parts than 95A TPU gives
- A 0.75kg Polymaker spool is enough
- You will tune the TPU 90A profile yourself
The product at a glance
Polymaker TPU 90A 0.75kg
Best for: Soft flexible parts
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 0.75kg
- Dimensional Accuracy
- ±0.03mm
- Shore Hardness
- 90A
- Features
- High Speed
View on Amazon: Polymaker TPU 90A 0.75kg Affiliate link
Polymaker High Speed TPU 90A 0.75kg black: softer Shore 90A, claimed 3x faster than ordinary TPU, ±0.03mm, wear and oil resistant; no settings listed.
Pros
- Softer 90A for grippy parts
- Speed-tuned TPU formula
- Oil, wear and aging resistance
Cons
- No temperature or speed numbers
- 0.75kg spool
- Harder to feed than 95A
Good fit if
- You print soft 90A bumpers, gaskets or straps
Skip if
- You run TPU 90A through a Bowden tube
Verdict: A soft, fast-printing TPU for direct drive printers.
Specifications side by side
| Spec | Polymaker TPU 90A 0.75kg |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 0.75kg |
| Dimensional Accuracy | ±0.03mm |
| Shore Hardness | 90A |
| Compatible Material | TPU |
| Features | High Speed |
| Dimensions | 7.87 × 7.87 × 1.77 inches |
| Weight | 1.65 pounds |
| Size | 1.75 mm |
| Color | 0.75kg Black 90a |
| Model | PD02001 |
Frequently asked questions
How soft is Polymaker TPU 90A?
Shore 90A, softer than the common 95A TPU grade.
How fast does Polymaker High Speed TPU 90A print?
Polymaker says up to three times faster than ordinary TPU but gives no mm/s figure.
Does the TPU 90A listing give temperatures?
No. Start from a TPU preset and adjust.
Can Polymaker TPU 90A run on a Bowden printer?
Softer TPU feeds poorly through Bowden tubes; direct drive is the safer choice.
How much TPU is on the Polymaker 90A spool?
0.75kg.
See also
- chitu systems conjure sculpt beige resin 2000g review
- qidi petg tough red filament review
- bambu lab pla filament jade white review
- polymaker petg filament 1 75mm review
- polymaker asa filament 1 75mm white review
- Polymaker Fiberon Carbon Fiber PETG Review: Who It Fits and Who Should Skip It
- Polymaker 1.75mm ABS Filament Review (2026): A Spec-Based Look
- Polymaker TPU 95A Flexible Filament (0.75kg) Review: Specs, Pros and Cons
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
