IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Neptune 4 Plus and 4 Max use their own nozzle, so generic MK8 nozzles do not fit, and IdeaFormer's 22-piece kit is made for these two printers only. It holds ten 0.4mm brass nozzles, two 0.4mm hardened steel nozzles and ten 0.4mm cleaning needles. Brass covers everyday PLA and PETG; the hardened steel pair is for wear-prone filaments. There is a conflict to note: one bullet says the hardened steel nozzle is made of stainless steel, which is a different material, so check the parts on arrival. IdeaFormer lists 1.75mm filament and says the bore is smooth and burr-free; it gives no temperature rating. The 10-to-2 split makes it a good spares stock for a Plus or Max. Our summary follows IdeaFormer's listing.
What stands out
- 10 brass + 2 hardened steel nozzles, 0.4mm
- 10 cleaning needles
- Neptune 4 Plus and 4 Max only
Who it fits
Good fit for
Neptune 4 Plus and 4 Max owners who want a stock of spare 0.4mm nozzles.
Who should skip it
Owners of the Neptune 4 or 4 Pro, and anyone who needs other nozzle sizes.
Verdict: A good-value spares kit for the larger Neptune 4 models.
IdeaFormer nozzle kit specs
10 brass, 0.4mm
Everyday printing.
2 hardened steel, 0.4mm
Listing also calls them stainless.
10 needles, 0.4mm
Clear partial clogs.
Neptune 4 Plus/Max
Only printers listed.
1.75mm filament
Stated diameter.
Temperature
Not stated.
Brass or hardened steel
Brass conducts heat well and is the stock choice for PLA, PETG and TPU. Hardened steel resists wear from abrasive filaments but transfers heat less readily, so many users raise the nozzle temperature a little when switching. The material conflict in the listing matters here: a stainless nozzle is not wear resistant in the same way, so confirm what you received before printing filled filaments.
Swapping nozzles
Change nozzles with the hotend heated, holding the heater block so the heat break is not twisted, and re-run the Z offset after each change. Use the needles from below to clear a partial clog before replacing a nozzle. Choose the IdeaFormer kit for spare nozzles only; choose a complete Neptune 4 Plus/Max hotend if the heater, thermistor or heat break has failed too.
Before you order
Checks for the IdeaFormer Neptune nozzle kit.
Check before you buy
- Your printer is a Neptune 4 Plus or 4 Max
- You only need 0.4mm nozzles
- You will check the steel nozzles' material
- You can reset the Z offset
The product at a glance
IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit
Best for: Neptune 4 Plus and Max
- Primary Material
- Hardened steel, brass
- Nozzle Diameter
- 0.4mm
View on Amazon: IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit Affiliate link
IdeaFormer 22-piece 0.4mm kit for the Neptune 4 Plus/Max: 10 brass and 2 hardened steel nozzles plus 10 cleaning needles.
Pros
- Lots of spare brass nozzles
- Two wear-resistant nozzles
- Needles included
Cons
- Steel material conflict
- 0.4mm only
Good fit if
- You own a Neptune 4 Plus or Max
- You wear through nozzles
Skip if
- Your printer is a Neptune 4 or 4 Pro
Verdict: A cheap way to stock spares.
Specifications side by side
| Spec | IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit |
|---|---|
| Primary Material | Hardened steel, brass |
| Nozzle Diameter | 0.4mm |
| Nozzle Material | Hardened Steel |
Frequently asked questions
Which printers fit the IdeaFormer 22-piece kit?
Only the Elegoo Neptune 4 Plus and Neptune 4 Max.
What is in the IdeaFormer Neptune kit?
Ten 0.4mm brass nozzles, two 0.4mm hardened steel nozzles and ten 0.4mm cleaning needles.
Are the IdeaFormer steel nozzles hardened or stainless?
The title says hardened steel; one bullet says stainless steel.
Do the IdeaFormer nozzles fit the Neptune 4 Pro?
No, IdeaFormer lists the 4 Plus and 4 Max only.
What filament size do the IdeaFormer Neptune nozzles take?
1.75mm.
Featured in
See also
- chindrag mono 2 mono 4 integrated fep film review
- chindrag sonic mini 8k screen protector review
- sahvaim a1 ams lite filament hub review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- powerhorse rotating turbo nozzle review
- earthtec 440014442front floor nozzle assembly review
