As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

8 Best 0.4mm Nozzles and Hotends for 3D Printers, Compared

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

0.4mm is the stock nozzle size on almost every FDM printer, so it is the part you replace most. Our top pick is SAHVAIM's 3-pack of 0.4mm hotend kits for the Bambu Lab A1, A1 Mini and A2L: hardened steel nozzles rated to 350℃, plug-and-play. The Comgrow 25-nozzle MK8 box is the cheapest pick for older Enders. The others are matched by printer: a full P1S hotend, Creality's official K1 and SPARKX i7 parts, Snapmaker's U1 head, a 2-pack for the Kobra 3, and a mixed kit for the Neptune 4 Plus and Max. All 8 come from published listings.

Our top pick: SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack.

Quick picks

#ProductBest forPrice
1 SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack Best overall Best overall Check price of SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack on Amazon
2 HzdaDeve 0.4mm P1S and P1P Hardened Steel Hotend Best for Bambu P1S Best for Bambu P1S Check price of HzdaDeve 0.4mm P1S and P1P Hardened Steel Hotend on Amazon
3 Creality K1C 0.4mm Quick-Swap Nozzle Best for Creality K1 Best for Creality K1 Check price of Creality K1C 0.4mm Quick-Swap Nozzle on Amazon
4 Creality SPARKX i7 0.4mm Quick-Swap Hotend Best for SPARKX i7 Best for SPARKX i7 Check price of Creality SPARKX i7 0.4mm Quick-Swap Hotend on Amazon
5 Snapmaker U1 0.4mm Stainless Steel Hot End Best for Snapmaker U1 Best for Snapmaker U1 Check price of Snapmaker U1 0.4mm Stainless Steel Hot End on Amazon
6 2PCS Kobra 3/Kobra 3 V2 Combo Hotend 3D Printer All Metal Extruder Hot End | with 0.4mm Brass Nozzle and Silicone Sock for Anycubic Kobra 3 and Kobra 3 V2 Combo 3D Printers Best for Kobra 3 Best for Kobra 3 Check price of 2PCS Kobra 3/Kobra 3 V2 Combo Hotend 3D Printer All Metal Extruder Hot End | with 0.4mm Brass Nozzle and Silicone Sock for Anycubic Kobra 3 and Kobra 3 V2 Combo 3D Printers on Amazon
7 IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit Best for Neptune 4 Best for Neptune 4 Check price of IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit on Amazon
8 Comgrow 0.4mm Brass Nozzle 25-Piece Kit Best budget Best budget Check price of Comgrow 0.4mm Brass Nozzle 25-Piece Kit on Amazon

The best fit for you

Our 8 picks

Best overall

SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack

Best for: Best overall

Nozzle Diameter
✓ 0.4mm
Primary Material
Hardened Steel
Maximum Temperature
350℃

View on Amazon: SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack Affiliate link

SAHVAIM 3-pack of 0.4mm hotend kits for Bambu Lab A1, A1 Mini and A2L: hardened steel nozzles rated to 350℃ with leak-proof threads, plug-and-play with no modifications, silicone socks included.

Pros

  • Three complete hotends
  • Hardened steel handles abrasive filament
  • Fits A1, A1 Mini and A2L

Cons

  • Bambu A series only

Good fit if

  • You print daily on an A1 and want spares on the shelf
  • You run CF filament now and then at 0.4mm

Skip if

  • You own a P1S or X1C

Verdict: Three ready-to-fit 0.4mm hotends for the A1 family.

Best for Bambu P1S

HzdaDeve 0.4mm P1S and P1P Hardened Steel Hotend

Best for: Best for Bambu P1S

Nozzle Diameter
✓ 0.4mm
Primary Material
hardened steel
Maximum Temperature
350°C

View on Amazon: HzdaDeve 0.4mm P1S and P1P Hardened Steel Hotend Affiliate link

HzdaDeve 0.4mm hotend assembly for Bambu Lab P1S and P1P: hardened nozzle, ceramic heater, thermistor, sock, heat block and heat sink preinstalled; all-metal heat break rated to 350℃. The nozzle is fixed, not removable.

Pros

  • Complete preassembled hotend
  • 350℃ heat break
  • Hardened nozzle

Cons

  • Nozzle cannot be removed from the assembly

Good fit if

  • Your P1S nozzle is clogged beyond cleaning
  • You want a full hotend at a low price

Skip if

  • You want the official Bambu part

Verdict: A full 0.4mm hotend for the P1 series.

Best for Creality K1

Creality K1C 0.4mm Quick-Swap Nozzle

Best for: Best for Creality K1

Nozzle Diameter
✓ 0.4mm
Primary Material
Copper alloy, hardened steel

View on Amazon: Creality K1C 0.4mm Quick-Swap Nozzle Affiliate link

Creality's official 0.4mm Unicorn nozzle for K1, K1C, K1 SE, K1 Max, K2 SE and the Ender 3 V3 range: titanium heat break, copper and hardened steel bi-metal body, rated up to 30mm³ flow at 240°.

Pros

  • Official part with flow figure
  • Fits K1, K2 SE and Ender 3 V3 families
  • Tool-free change

Cons

  • Nozzle only, not a full hotend

Good fit if

  • Your K1C needs a fresh 0.4mm nozzle
  • You print at high flow on a K1 Max

Skip if

  • Your Creality uses MK8 nozzles

Verdict: Creality's own 0.4mm nozzle for its CoreXY machines.

Best for SPARKX i7

Creality SPARKX i7 0.4mm Quick-Swap Hotend

Best for: Best for SPARKX i7

Nozzle Diameter
✓ 0.4mm
Maximum Temperature
300°C

View on Amazon: Creality SPARKX i7 0.4mm Quick-Swap Hotend Affiliate link

Creality's official 0.4mm hotend for the SPARKX i7: changes in seconds with an integrated lever and no tools, rated for PLA, PETG, ABS and TPU and for the i7's 500mm/s top speed.

Pros

  • Tool-free lever change
  • Official i7 part
  • 500mm/s ready

Cons

  • SPARKX i7 only
  • No nozzle material stated

Good fit if

  • Your SPARKX i7 Combo needs a spare 0.4mm hotend
  • You change hotends between materials

Skip if

  • You need abrasive-proof steel

Verdict: The i7's everyday hotend.

Best for Snapmaker U1

Snapmaker U1 0.4mm Stainless Steel Hot End

Best for: Best for Snapmaker U1

Nozzle Diameter
✓ 0.4mm
Primary Material
Stainless Steel
Maximum Temperature
300℃

View on Amazon: Snapmaker U1 0.4mm Stainless Steel Hot End Affiliate link

Snapmaker's 0.4mm stainless steel hot end, the U1 standard, with a built-in ceramic heater and silicone sock, rated to 300℃. The U1 cannot mix hot end sizes in one print.

Pros

  • Official U1 part
  • Ceramic heater built in

Cons

  • Stainless, not hardened
  • Same size needed on every U1 head in a print

Good fit if

  • You need more 0.4mm heads for a U1
  • You print regular PLA and PETG

Skip if

  • You plan to print carbon fiber

Verdict: Snapmaker's standard 0.4mm head.

Best for Kobra 3

2PCS Kobra 3/Kobra 3 V2 Combo Hotend 3D Printer All Metal Extruder Hot End | with 0.4mm Brass Nozzle and Silicone Sock for Anycubic Kobra 3 and Kobra 3 V2 Combo 3D Printers

Best for: Best for Kobra 3

Nozzle Diameter
✓ 0.4mm

View on Amazon: 2PCS Kobra 3/Kobra 3 V2 Combo Hotend 3D Printer All Metal Extruder Hot End | with 0.4mm Brass Nozzle and Silicone Sock for Anycubic Kobra 3 and Kobra 3 V2 Combo 3D Printers Affiliate link

REDREX 2-pack of pre-assembled hotends for ANYCUBIC Kobra 3 and Kobra 3 V2 Combo: 0.4mm brass nozzles with under 0.02mm diameter error and a copper and titanium heat break; plug the connectors in and print.

Pros

  • Two hotends in the pack
  • Plug-and-play
  • Bi-metal heat break

Cons

  • Brass nozzle wears with CF filament

Good fit if

  • Your Kobra 3 Combo clogged and you want a spare
  • You print PLA, PETG and TPU

Skip if

  • You print abrasive filament

Verdict: Two ready hotends for the Kobra 3.

Best for Neptune 4

IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit

Best for: Best for Neptune 4

Nozzle Diameter
✓ 0.4mm
Primary Material
Hardened steel, brass

View on Amazon: IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit Affiliate link

Read our full review

IdeaFormer 22-piece 0.4mm kit for ELEGOO Neptune 4 Plus and 4 Max only: 10 brass nozzles, 2 hardened steel nozzles and 10 cleaning needles.

Pros

  • Brass and hardened steel in one kit
  • Cleaning needles included

Cons

  • Neptune 4 Plus and Max only

Good fit if

  • You own a Neptune 4 Max and change nozzles often
  • You want a couple of hardened nozzles for CF

Skip if

  • You own a base Neptune 4

Verdict: A year of 0.4mm nozzles for the Neptune 4 Plus and Max.

Best budget

Comgrow 0.4mm Brass Nozzle 25-Piece Kit

Best for: Best budget

Nozzle Diameter
✓ 0.4mm
Primary Material
Brass

View on Amazon: Comgrow 0.4mm Brass Nozzle 25-Piece Kit Affiliate link

Read our full review

Comgrow 25 brass MK8 nozzles in 0.4mm for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Pro, Ender 3 S1 and CR-10, with 10 cleaning needles, a wrench, tweezers and a box; diameter error under 0.02mm.

Pros

  • Cheapest pick here
  • 25 nozzles
  • Tools included

Cons

  • Brass only
  • Older MK8 printers only

Good fit if

  • You run an Ender 3 V2 and replace nozzles when they clog

Skip if

  • Your printer uses a quick-change hotend

Verdict: A box of cheap 0.4mm nozzles for MK8 printers.

Specifications side by side

Spec SAHVAIM Bambu Lab A1 0.4mm Hardened Steel Hotend 3-Pack HzdaDeve 0.4mm P1S and P1P Hardened Steel Hotend Creality K1C 0.4mm Quick-Swap Nozzle Creality SPARKX i7 0.4mm Quick-Swap Hotend Snapmaker U1 0.4mm Stainless Steel Hot End 2PCS Kobra 3/Kobra 3 V2 Combo Hotend 3D Printer All Metal Extruder Hot End | with 0.4mm Brass Nozzle and Silicone Sock for Anycubic Kobra 3 and Kobra 3 V2 Combo 3D Printers IdeaFormer Neptune 4 Plus/Max 22-Piece Nozzle Kit Comgrow 0.4mm Brass Nozzle 25-Piece Kit
Primary Material Hardened Steel hardened steel Copper alloy, hardened steel not stated Stainless Steel not stated Hardened steel, brass Brass
Maximum Temperature 350℃ 350°C not stated 300°C 300℃ not stated not stated not stated
Nozzle Diameter 0.4mm 0.4 mm 0.4 mm 0.4mm 0.4mm not stated 0.4mm 0.4 mm
Nozzle Material Hardened Steel Hardened Steel Hardened Steel not stated not stated not stated Hardened Steel not stated
Model not stated P1S extruder not stated not stated snapmaker not stated not stated not stated
Size not stated not stated 0.4mm not stated not stated not stated not stated not stated
Color not stated not stated Unicorn not stated not stated not stated not stated not stated

How to choose a 0.4mm nozzle or hotend

  1. Brass for PLA, hardened steel for fibers

    Brass conducts heat well but wears quickly with carbon fiber or glow filament; the SAHVAIM, HzdaDeve and two IdeaFormer nozzles are hardened steel.

  2. Know whether you are buying a nozzle or a hotend

    The Creality K1 and Comgrow parts are nozzles; the SAHVAIM, HzdaDeve, REDREX, Snapmaker and SPARKX i7 parts are full hotends.

  3. Snapmaker U1 heads must match

    Snapmaker notes the U1 cannot use different hot end sizes in one print, so buy 0.4mm heads in sets.

  4. Check the heat rating for ABS and nylon

    SAHVAIM and HzdaDeve rate their parts to 350℃, Snapmaker to 300℃.

Frequently asked questions

Is the Creality 0.4mm Unicorn nozzle hardened steel?

It combines copper alloy and hardened steel with a titanium heat break, according to Creality.

Can the HzdaDeve P1S hotend's nozzle be removed?

No, HzdaDeve says the hardened nozzle is fixed to the assembly.

Which 0.4mm nozzles fit an Ender 3 V2?

The Comgrow 25-piece MK8 brass set lists the Ender 3 V2 among its printers.

Does the IdeaFormer Neptune 4 kit fit the base Neptune 4?

No, IdeaFormer lists only the Neptune 4 Plus and Neptune 4 Max.

How hot can the SAHVAIM A1 hotend run?

SAHVAIM rates it to 350℃.

See also