As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SAHVAIM AMS Lite Filament Hub for Bambu Lab A1 Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The AMS Lite on the Bambu Lab A1 and A1 Mini merges four PTFE tubes into one before the extruder, and that five-way part is what SAHVAIM sells here as a replacement. Four tubes plug into one side, one tube leaves the other side to the top of the extruder, and the box holds the part and two buckles. It is useful if the original cracked, a tube fitting wore loose, or you are building a second feed path. The listing names the A1 and A1 Mini, points to an install video, and spells the brand 'Bamboo' in places; it gives no material and no dimensions. It does not add multi-color printing to a printer without an AMS Lite. Our notes follow SAHVAIM's listing.

What stands out

  • Four-into-one PTFE junction
  • For A1 and A1 Mini AMS Lite
  • Two buckles included

Who it fits

Good fit for

A1 and A1 Mini owners with a damaged or worn AMS Lite five-way part.

Who should skip it

Printers without an AMS Lite, and buyers who need a stated material.

Verdict: A cheap replacement part for the AMS Lite feed path.

SAHVAIM AMS Lite hub specs

4 inputs, 1 output

Four tubes to the extruder.

A1 / A1 Mini

Listed printers.

2 buckles

Hold the tubes.

Install video

Linked by the seller.

Material

Not stated.

Dimensions

Not stated.

Where the part sits

Each of the AMS Lite's four spools feeds its own PTFE tube into this junction, and a single tube carries the active filament to the extruder. If one input is loose or cracked, filament can catch at the merge and cause failed loads or retractions. Swapping the junction is a few minutes' work with the buckles.

Replacing it

Unload all filament, pull the four tubes and the outgoing tube, fit the new part and clip the buckles back. Run a load and unload on each slot to confirm smooth travel. Choose the SAHVAIM part if your A1's original junction is damaged; choose Bambu Lab's official spare if you want the exact factory part.

Before you order

Checks for the SAHVAIM AMS Lite hub.

Check before you buy

  • Your printer is an A1 or A1 Mini with AMS Lite
  • Your old junction is cracked or loose
  • You can reseat five PTFE tubes
  • You accept no stated material

The product at a glance

SAHVAIM AMS Lite Filament Hub

Best for: A1 AMS Lite repairs

Color Printing
Multi-Color

View on Amazon: SAHVAIM AMS Lite Filament Hub Affiliate link

SAHVAIM five-way filament hub for the A1/A1 Mini AMS Lite: four PTFE inputs, one output, two buckles.

Pros

  • Low-cost spare
  • Quick to fit
  • Buckles included

Cons

  • Material not stated
  • Thin listing

Good fit if

  • Your AMS Lite junction is damaged
  • Your printer is an A1-series with AMS Lite

Skip if

  • You do not have an AMS Lite

Verdict: A practical spare for A1 owners.

Specifications side by side

Spec SAHVAIM AMS Lite Filament Hub
Color Printing Multi-Color

Frequently asked questions

Which printers does the SAHVAIM filament hub fit?

The Bambu Lab A1 and A1 Mini with the AMS Lite.

What does the SAHVAIM five-way part do?

It joins four PTFE tubes from the AMS Lite into one tube that feeds the extruder.

What is in the SAHVAIM box?

The five-way part and two buckles.

Does the SAHVAIM part add multi-color printing on its own?

No, it replaces a part of the AMS Lite; you still need the AMS Lite.

What is the SAHVAIM junction made of?

The listing does not say.

See also