HEPHI3D TINA2S Review: A Quiet Mini Printer with Open Slicers (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The TINA2S is usually sold as a toy-like first printer, but this orange HEPHI3D listing highlights two things that matter after the first week: noise and software freedom. HEPHI3D quotes 40-50dB from its own mainboard, quiet enough for a bedroom or home office, and the printer is open to outside slicers: Wiibuilder, Cura, PrusaSlicer and Kiri, which runs in Chrome and so works on a school Chromebook. Files go over Wi-Fi with one click, or by TF card or USB. For quick wins, the app offers 3,500+ ready models and 25+ custom modules. The hardware is simple: auto bed leveling, up to 200mm/s, a filament sensor, power-loss resume, a flexible magnetic plate and a silicone sock on the nozzle. The semi-enclosed body measures about 8.3×8.7×11.4 in and weighs 5.69 lb. Filaments named are PLA, PLA Pro and TPU, and a PLA spool ships in the box. The page gives no build volume, so check a model's size before promising it. HEPHI3D's listing is the source here.
What stands out
- 40-50dB printing
- Open to Cura, PrusaSlicer, Kiri (Chromebook)
- Wi-Fi, TF card or USB transfer
- PLA, PLA Pro and TPU; PLA spool included
Who it fits
Good fit for
Beginners and students who want a quiet desk printer and the option to grow into real slicer software, including on a Chromebook.
Who should skip it
Anyone who needs a confirmed build volume or prints anything larger than small desk models.
Verdict: A quiet, open little printer that grows with a learner; the missing build volume is the main gap.
TINA2S specs worth knowing
40-50dB
Quiet enough to run near a sleeping room.
Kiri support
Slicing in a browser on a Chromebook.
Up to 200mm/s
Brisk for a mini printer.
Filament sensor + power-loss resume
Saves prints when a spool ends or power drops.
5.69 lb, about 8.3×8.7×11.4 in
Sits on a narrow shelf.
Small, semi-enclosed and safe to touch
The semi-enclosed frame keeps fingers away from moving parts while leaving the print visible, and a high-temperature silicone cover wraps the nozzle. The magnetic plate flexes to release parts. HEPHI3D calls the frame rigid with smooth motion; no rail or motor details are listed.
From app models to your own designs
Start with the app library and one-tap printing. When ready, install Cura or PrusaSlicer, or open Kiri in Chrome, and send files over Wi-Fi. TPU is on the list, but print it slowly on a small machine like this.
Before buying the orange HEPHI3D TINA2S
Checks for this small listing.
Check before you buy
- Your TINA2S models are small; the page lists no build volume
- You want TINA2S slicing on a Chromebook or PC
- A TINA2S at 40-50dB suits your room
The product at a glance
HEPHI3D Tina2S Mini 3D Printer
Best for: Quiet home and Chromebook use
- Print Speed
- 200mm/s
- Leveling Type
- Auto leveling
- Features
- Wi-Fi, Fully Assembled
- Target Audience
- Beginners
- Color
- Orange
- Dimensions
- 8.27 × 8.72 × 11.4 inches
View on Amazon: HEPHI3D Tina2S Mini 3D Printer Affiliate link
HEPHI3D TINA2S (orange): a quiet 40-50dB mini printer with Wi-Fi, an app library and open slicer support including Kiri for Chromebooks.
Pros
- Quiet mainboard
- Open slicer choice
- Filament sensor and power-loss resume
Cons
- Build volume not listed
- Small machine for small parts
- Few hardware details
Good fit if
- You want a quiet first printer that grows with you
Skip if
- You need large or confirmed print sizes
Verdict: A quiet, flexible mini printer for learners.
Specifications side by side
| Spec | HEPHI3D Tina2S Mini 3D Printer |
|---|---|
| Print Speed | 200mm/s |
| Leveling Type | Auto leveling |
| Leveling | Auto Leveling |
| Features | Wi-Fi, Fully Assembled |
| Target Audience | Beginners |
| Color | Orange |
| Dimensions | 8.27 × 8.72 × 11.4 inches |
| Weight | 5.69 pounds |
Frequently asked questions
Can I use the TINA2S with a Chromebook?
Yes, the listing names Kiri, a browser-based slicer, alongside Cura and PrusaSlicer.
How loud is the HEPHI3D TINA2S?
HEPHI3D quotes 40-50dB.
What is the TINA2S build volume?
This listing does not state it.
Does the TINA2S come with filament?
Yes, one spool of PLA.
Featured in
See also
- qidi max4 combo large heated chamber review
- entina tina2 plus 100mm build volume review
- heygears reflex rs turbo amber screen review
- hephi3d tina2 plus beginner 3d printer review
- hephi3d 3d printer pla filament review
- HEPHI3D PLA Filament 4 x 250g (Black/White/Red/Blue) Review (2026)
- hephi3d tina2c compact 3d printer review
- unxuey 50pcs 3d printer heatsink review
