HEPHI3D PLA Filament 4 x 250g (Black/White/Red/Blue) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
HEPHI3D's PLA bundle packs four 250g spools in black, white, red and blue, 1kg in total, and it is a sensible first filament set for owners of small printers: HEPHI3D names the Tina2, Tina2S, Tina2C and Tina2 Plus, whose compact spool holders suit 250g reels, and the basic colors cover most beginner prints from tool holders to two-tone name tags. The listing gives proper settings, a 190-210°C nozzle and a 0-60°C bed, plus a ±0.02mm diameter tolerance on 1.75mm filament. Spools arrive dried and vacuum sealed. HEPHI3D also claims low warping, easy support removal and good layer adhesion, the usual PLA promises without measured figures. This black, white, red and blue set is one of several HEPHI3D 4 x 250g color mixes, so choose it if you want plain, neutral colors rather than brights or pastels. The other claim, that it works in 99% of FDM printers and 3D pens, is marketing. We relied on HEPHI3D's listing for this review.
What stands out
- 4 x 250g: black, white, red, blue
- 1.75mm ±0.02mm
- 190-210°C nozzle, 0-60°C bed
- Dried and vacuum packed
Who it fits
Good fit for
Tina2-series and other mini printer owners, beginners and families who want four basic PLA colors in reels that fit small holders.
Who should skip it
Anyone printing large parts in one color, who will run out of a 250g reel fast and pay more per kilo than with a 1kg spool.
Verdict: A tidy basic-color starter pack for small printers, with real print settings on the page.
HEPHI3D 4-color PLA set specs
4 x 250g = 1kg
Four small reels instead of one big spool.
Black/White/Red/Blue
Neutral and primary colors for everyday prints.
±0.02mm on 1.75mm
Consistent diameter for steady feeding.
190-210°C nozzle
Standard PLA range for mini printers.
0-60°C bed
Prints on unheated beds such as many Tina2 models.
Why 250g reels suit mini printers
Small printers like the Tina2 series often have compact or top-mounted spool holders where a full 1kg spool is awkward. Four 250g reels fit those holders and let you switch colors without a big outlay for each. The trade-off is that a long single-color print can empty one reel, so check filament use in your slicer first.
Printing the HEPHI3D basic colors
Start at about 200°C, the middle of HEPHI3D's 190-210°C range, and use a bed up to 60°C if your printer has one; the low end of 0°C means unheated beds work. The reels come dried in a vacuum bag, so store opened ones in a bag with desiccant. Black and white suit functional parts, while red and blue work for labels and two-color pieces.
Before buying the HEPHI3D black/white/red/blue set
Checks.
Check before you buy
- Your printer's holder takes the HEPHI3D 250g reels
- You want black, white, red and blue rather than other HEPHI3D color sets
- Your prints need less than 250g per HEPHI3D color
The product at a glance
HEPHI3D 1.75mm PLA Filament Bundle (4 x 250g)
Best for: Mini printers and beginners
- Printing Technology
- FDM
- Compatible Material
- PLA
- Size
- 1.75Mm
- Weight
- 2.2 pounds
View on Amazon: HEPHI3D 1.75mm PLA Filament Bundle (4 x 250g) Affiliate link
HEPHI3D PLA, 4 x 250g in black/white/red/blue, 1.75mm ±0.02mm, 190-210°C nozzle and 0-60°C bed, dried and vacuum packed; aimed at Tina2 mini printers.
Pros
- Settings and tolerance listed
- Reels fit small spool holders
- Four basic colors
Cons
- Only 250g per color
- Higher cost per kilo than a 1kg spool
- No-clog claims are not measured
Good fit if
- You own a Tina2-series printer and want basic colors
Skip if
- You print large single-color parts that empty a HEPHI3D 250g reel
Verdict: A basic-color starter set for mini printers.
Specifications side by side
| Spec | HEPHI3D 1.75mm PLA Filament Bundle (4 x 250g) |
|---|---|
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Weight | 2.2 pounds |
| Color | Black/White/Red/Blue |
Frequently asked questions
What colors are in this HEPHI3D PLA bundle?
Black, white, red and blue, 250g each.
What temperature does HEPHI3D list for this PLA?
190-210°C nozzle and 0-60°C bed.
Is the HEPHI3D 4 x 250g set made for Tina2 printers?
HEPHI3D names Tina2, Tina2S, Tina2C and Tina2 Plus, and says it fits most FDM printers.
What tolerance does HEPHI3D give for this 4-color PLA?
±0.02mm on 1.75mm filament.
See also
- uniformation gk3 pro 16k 385nm resin printer review
- creality sparkx i7 autofill combo AI camera review
- heygears reflex rs release film 2 pack review
- hephi3d tina2 plus beginner 3d printer review
- hephi3d 3d printer pla filament review
- HEPHI3D TINA2S Review: A Quiet Mini Printer with Open Slicers (2026)
- micro center 3 in 1 bundle review
- ecobee total security bundle 1 year review
