ELEGOO TPU 95A Translucent Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's TPU in Translucent is a 95A flexible filament, 1kg of 1.75mm, for parts that must bend, stretch or soak up knocks: phone cases, bumpers, drone guards, watch straps and seals. ELEGOO's key figure is elongation: the material is said to stretch up to five times its length without breaking, and to have outstanding impact resistance for parts that get dropped or hit. The translucent color lets light through, which suits lamp diffusers, LED covers and cases where you want to see the device color. Shore 95A is the firm end of TPU and feeds more easily than softer grades. ELEGOO advises drying before printing, and gives no temperatures, speed or tolerance figure. This review is based on ELEGOO's listing.
What stands out
- Stretches up to 5x without breaking
- Translucent, light-passing color
- Shore 95A, easier-feeding TPU
Who it fits
Good fit for
Makers of phone cases, bumpers, LED diffusers and gaskets who want a see-through flexible part and own a direct drive printer.
Who should skip it
Owners of long Bowden setups that buckle soft filament, and anyone who wants temperatures listed or a fully clear result.
Verdict: A useful translucent 95A TPU for flexible, impact-absorbing parts; dry it and tune it yourself.
ELEGOO TPU 95A translucent specs
Shore 95A
Firm-flexible; rebounds after bending.
Up to 5x stretch
Elongation claim before breaking.
High impact resistance
For drops and collisions.
Translucent color
Diffuses light; not glass-clear.
1kg, 1.75mm
Tolerance not stated.
Dry before printing
ELEGOO's advice; TPU absorbs moisture.
Material and color
Thermoplastic polyurethane at 95A behaves like firm rubber. Translucent TPU prints frosted rather than transparent, and thicker walls look more milky, so it works best for glow effects and covers rather than windows. ELEGOO dries and vacuum seals each spool, then still asks you to dry it before printing.
Printing translucent TPU
Use a direct drive extruder if you can and slow down: flexible filament jams when pushed hard. Turn retraction down or off to limit stringing and grinding. With no temperatures on the page, begin from a 95A TPU preset. For the clearest result on diffusers, print thin walls with 100% infill and few layer changes.
Before you buy
Checks for ELEGOO translucent TPU 95A.
Check before you buy
- Your extruder handles flexible filament
- You want see-through, frosted parts
- You can dry the spool
- You will tune a TPU profile
The product at a glance
ELEGOO 95A TPU Filament (1.75mm, 1kg)
Best for: See-through flexible parts
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Shore Hardness
- 95A
- Printing Technology
- FDM
- Weight
- 2.2 pounds
View on Amazon: ELEGOO 95A TPU Filament (1.75mm, 1kg) Affiliate link
ELEGOO TPU 95A translucent: 1kg 1.75mm, stretches up to 5x, high impact resistance, frosted light-passing color, dry before printing; no temps listed.
Pros
- Big stretch figure
- Light-passing color
- Strong impact resistance
Cons
- No temperatures listed
- Frosted, not clear
Good fit if
- You print cases or diffusers
- You have direct drive
Skip if
- Your Bowden tube is long
Verdict: A flexible translucent TPU for cases and light covers.
Specifications side by side
| Spec | ELEGOO 95A TPU Filament (1.75mm, 1kg) |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Weight | 2.2 pounds |
| Size | TPU 95A |
| Color | Tpu Translucent 1kg |
Frequently asked questions
What hardness is ELEGOO TPU?
Shore 95A.
How far does it stretch?
Up to five times its original size without breaking, per ELEGOO.
Is translucent TPU clear?
It passes light but prints frosted, not glass-clear.
Does ELEGOO list print temperatures?
No temperatures or speeds are listed.
Translucent or black TPU?
Choose translucent for light diffusers and see-through cases; choose black for hard-wearing parts where looks matter less.
Featured in
See also
- elegoo abs like 3 0 pro grey resin review
- elegoo abs like 3 0 clear red resin 2kg review
- elegoo neptune 3 pro plus max extruder review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- best ELEGOO 3d printers
- easycargo 30pcs 3d printer heatsink review
