ELEGOO Silk PLA Shiny Gold Filament Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO Silk PLA in Shiny Gold is a 1kg spool of 1.75mm filament at ±0.02mm with a glossy, metallic-looking finish, made for decorative prints: trophies, ornaments, vases, figurines and cosplay trim. The appeal is the shine without painting; ELEGOO says the PLA base keeps the usual easy printing, with low warp and shrinkage and no odor. The spool has a wider inner hub for easier feeding, and winding is checked by hand. As with most silk PLA, expect less strength than standard PLA, since silk additives trade toughness for gloss, though ELEGOO does not state figures either way. The page lists no nozzle or bed temperature and no speed. All details are drawn from ELEGOO's listing.
What stands out
- Glossy shiny gold finish
- ±0.02mm tolerance
- Wide spool hub, hand-checked winding
Who it fits
Good fit for
Makers printing gifts, trophies, holiday ornaments, vases and props who want a gold sheen straight off the printer.
Who should skip it
Anyone printing load-bearing parts, or who needs listed settings and speed ratings for a fast printer.
Verdict: A neat gold silk PLA for decorative prints; tune your own profile and keep it to display pieces.
ELEGOO shiny gold silk details
Silk PLA, shiny gold
Metallic gloss with no paint.
±0.02mm on 1.75mm
Tight sizing for even lines.
Low warp, odorless
Easy on open printers.
Larger spool inner hub
Smoother pull from the holder.
1kg (2.2 lb)
Standard spool weight.
No temps or speed listed
Use a silk PLA profile.
Finish and spool
Silk PLA's shine comes from additives that line up as the strand is laid down, so smooth curved walls catch light best. ELEGOO dries the spool before vacuum sealing it, and the bigger hub hole reduces drag. The finish hides layer lines better than matte filament but shows seams, so place them at a back corner.
Printing shiny gold silk
Silk PLA usually looks best a little hotter and slower than plain PLA; run a temperature tower and compare the shine at each step, since ELEGOO lists no range. Use few walls and a slower outer wall speed on vases and ornaments. Keep the spool dry, as wet silk turns dull and stringy.
Before you buy
Checks for ELEGOO shiny gold silk PLA.
Check before you buy
- Your prints are decorative
- You want a gold sheen without paint
- You can tune temperatures yourself
- You print at moderate speed
The product at a glance
ELEGOO 1.75mm Silk PLA Filament
Best for: Gold decorative prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02 mm
- Surface Finish
- Silk
- Printing Technology
- FDM
View on Amazon: ELEGOO 1.75mm Silk PLA Filament Affiliate link
ELEGOO Silk PLA Shiny Gold: 1kg 1.75mm at ±0.02mm, glossy metallic finish, low warp, odorless, wide spool hub; no temperatures or speed listed.
Pros
- Metallic gold shine
- Tight tolerance
- Easy-feeding spool hub
Cons
- No print settings listed
- For display, not load
Good fit if
- You print decor and gifts
- You want gold without paint
Skip if
- You need strong parts
Verdict: A good gold silk PLA for display prints.
Specifications side by side
| Spec | ELEGOO 1.75mm Silk PLA Filament |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Dimensional Accuracy | +/- 0.02 mm |
| Surface Finish | Silk |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Finish | Silk |
| Weight | 2.2 pounds |
| Color | Silk Gold |
Frequently asked questions
What finish does ELEGOO Silk PLA Shiny Gold give?
A glossy, metallic gold look, per ELEGOO.
What tolerance is listed?
ELEGOO lists ±0.02mm for the shiny gold spool.
Does ELEGOO list print temperatures?
No temperatures or speeds are given on the page.
Is silk PLA strong?
ELEGOO gives no strength data; silk PLA is usually chosen for looks, not load.
Shiny gold silk or standard PLA?
Choose shiny gold silk for ornaments and display pieces; choose standard PLA for brackets and functional parts.
Featured in
See also
- elegoo rapid pla plus black white 2kg review
- elegoo pla cf black filament review
- elegoo black abs filament 1kg review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- best ELEGOO 3d printers
- unxuey 50pcs 3d printer heatsink review
