ELEGOO PLA-CF 1.75mm Black Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's PLA-CF is a black carbon fiber PLA, 1kg of 1.75mm held to ±0.02mm, for stiff functional parts with a matte look. ELEGOO pitches it for strength and rigidity, tight layer bonding and a smoother surface where layer lines are less visible, so it suits drone frames, jigs, camera mounts and cosplay armor that should look technical. It prints like PLA on an open printer, with no enclosure needed. ELEGOO itself recommends a hardened steel nozzle, since carbon fiber wears brass. What the page does not give: the fiber percentage, print temperatures, speed and any strength numbers. This review draws only on the ELEGOO listing.
What stands out
- Carbon-filled PLA for stiffness
- Satin-matte black that masks layering
- ±0.02mm, prints on open printers
Who it fits
Good fit for
Owners of open printers with a hardened nozzle who want stiff, matte black parts without the warping of nylon or ABS blends.
Who should skip it
Anyone with a brass nozzle only, and buyers who need fiber content, heat resistance or strength data before choosing.
Verdict: An easy way into carbon-filled filament for stiff matte parts, with thin technical data.
ELEGOO PLA-CF facts
Carbon fiber reinforced PLA
Stiffer than plain PLA; fiber share not given.
±0.02mm on 1.75mm
Even feeding.
Matte black surface
Masks layer lines.
Hardened steel nozzle advised
ELEGOO's own recommendation.
No enclosure needed
PLA base keeps warping low.
No temps, speed or strength data
Start from a PLA-CF preset.
Material and finish
Carbon fiber in a PLA base adds rigidity and dulls the surface to a satin matte black. The trade-off is lower flexibility, so thin clips may snap rather than bend. Spools are machine-wound to prevent tangles, dried and vacuum sealed. ELEGOO does not say how much fiber is in the blend.
Printing ELEGOO PLA-CF
Swap to a hardened nozzle of 0.4mm or larger before the first spool, as fibers grind brass quickly. Use a PLA-CF preset if your slicer has one; otherwise begin a little above plain PLA settings and check with a temperature tower. Stiff fiber filament can snap in tight feed paths, so check the route from spool to extruder.
Before you buy
Checks for ELEGOO PLA-CF black.
Check before you buy
- You have a hardened nozzle
- You want stiff, matte parts
- Your parts do not need to flex
- You can tune temps yourself
The product at a glance
ELEGOO PLA-CF 1.75mm Black Filament (1kg)
Best for: Stiff matte black parts
- Material Type
- PLA-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Printing Technology
- FDM
- Features
- Carbon Fiber
View on Amazon: ELEGOO PLA-CF 1.75mm Black Filament (1kg) Affiliate link
ELEGOO PLA-CF black: carbon fiber PLA, 1kg 1.75mm at ±0.02mm, stiff with a matte finish, hardened nozzle recommended; no fiber %, temps or strength data.
Pros
- Stiff, matte parts
- Prints without enclosure
- Tight tolerance
Cons
- Fiber share not stated
- Needs hardened nozzle
Good fit if
- You print jigs and frames
- You own a hardened nozzle
Skip if
- You need flexible parts
Verdict: Easy stiff matte PLA for hardened-nozzle printers.
Specifications side by side
| Spec | ELEGOO PLA-CF 1.75mm Black Filament (1kg) |
|---|---|
| Material Type | PLA-CF |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Features | Carbon Fiber |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Pla-cf Black 1000g |
Frequently asked questions
Does ELEGOO PLA-CF need a hardened nozzle?
ELEGOO recommends one in the listing.
How much carbon fiber is in it?
The listing does not say.
Does it need an enclosure?
No; it prints like PLA on open printers.
Does ELEGOO list print temperatures?
No temperatures or speeds are given.
PLA-CF or PETG-CF?
Choose PLA-CF for the easiest stiff matte parts indoors; choose PETG-CF for more heat and chemical resistance.
Featured in
See also
- elegoo black abs filament 1kg review
- elegoo 8k standard resin vanilla 1kg review
- elegoo tpu 95a translucent filament review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- best ELEGOO 3d printers
- unxuey 50pcs 3d printer heatsink review
