ELEGOO Black ABS Filament 1.75mm 1kg Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's black ABS is a 1kg spool of 1.75mm filament for tough, heat-tolerant parts: drone mounts, protective cases, outdoor gear and tool holders. ELEGOO rates it to withstand temperatures up to 85°C and resist water, which puts it well above PLA for parts in a hot car or near a motor. The listing is blunt on requirements: an enclosed printer is required, and the filament should be dried before use even though it ships vacuum sealed. Strong layer adhesion and impact resistance are the other claims. The page gives no nozzle or bed temperature and no tolerance figure, only "high-precision" diameter. Everything here is from ELEGOO's listing.
What stands out
- Heat resistance up to 85°C
- Water and impact resistance
- Clear enclosure requirement
Who it fits
Good fit for
Owners of enclosed printers such as the Centauri Carbon, K1 or P1S who need black parts that survive heat and knocks.
Who should skip it
Open-frame printer owners, anyone without good room ventilation, and buyers who want temperatures or a tolerance figure listed.
Verdict: A straightforward black ABS for enclosed printers, backed by a real heat figure but no settings.
ELEGOO black ABS specs
Heat resistance 85°C
Holds shape in hot cars and near motors.
Water resistant
Suits outdoor and damp-area parts.
High impact toughness
For cases, mounts and tool parts.
Enclosed printer required
ELEGOO's own requirement.
Dry before use
Advised even from a sealed bag.
No temps or tolerance
Use an ABS preset and calibrate.
Spool and packing
Machine winding with manual inspection keeps the line tidy to cut tangles and snaps. The spool comes vacuum sealed, and ELEGOO still suggests drying it before printing. The model code on the listing is US-EL-3D-PA01. There is no tolerance number, only a claim of high-precision diameter.
Printing ELEGOO black ABS
Warm the enclosure before printing and keep doors shut until the part cools, which limits warping and splits between layers. Turn part cooling low, add a brim to long flat parts, and use an ABS preset since ELEGOO lists no temperatures. Run the printer in a ventilated room or with a filter, as ABS fumes are strong.
Before you buy
Checks for ELEGOO black ABS.
Check before you buy
- Your printer is enclosed
- Parts face heat up to 85°C
- You can dry the spool first
- The room is ventilated
The product at a glance
ELEGOO 1.75mm ABS Filament (1 kg)
Best for: Heat-exposed black parts
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Printing Technology
- FDM
- Weight
- 2.2 pounds
View on Amazon: ELEGOO 1.75mm ABS Filament (1 kg) Affiliate link
ELEGOO ABS black: 1kg 1.75mm, heat resistant to 85°C, water and impact resistant, enclosed printer required, dry before use; no temps or tolerance listed.
Pros
- 85°C heat resistance figure
- Impact and water resistance
- Clear requirements
Cons
- Needs an enclosed printer
- No temps or tolerance
Good fit if
- You own an enclosed printer
- Parts face heat
Skip if
- Your printer is open
Verdict: Black ABS for heat-exposed parts in enclosed printers.
Specifications side by side
| Spec | ELEGOO 1.75mm ABS Filament (1 kg) |
|---|---|
| Material Type | ABS |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Printing Technology | FDM |
| Compatible Material | ABS |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Abs Black 1kg |
| Model | US-EL-3D-PA01 |
Frequently asked questions
How much heat can ELEGOO ABS take?
Up to 85°C, per ELEGOO.
Does ELEGOO ABS need an enclosed printer?
Yes; the listing says an enclosed printer is required.
Should I dry it first?
ELEGOO recommends drying before use.
Does ELEGOO list temperatures or tolerance?
Neither; only a high-precision diameter claim.
ELEGOO ABS or PETG?
Choose ABS for heat up to 85°C in an enclosed printer; choose PETG for open printers and lower fumes.
Featured in
See also
- elegoo 8k standard resin vanilla 1kg review
- elegoo tpu 95a translucent filament review
- elegoo abs like 3 0 pro grey resin review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- best ELEGOO 3d printers
- easycargo 30pcs 3d printer heatsink review
